On Thu, Aug 16, 2012 at 11:13 AM, Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> wrote: > > There's a bug [1] where the faster GMBUS transmissions fail with some > CRTs, and the fix [2] is to fallback to GPIO bit-banging upon errors. As > noted in the bug, the fix still leaves plenty of EDID dumps in dmesg, so > some measures to reduce the EDID error messages would be most welcome. > > [1] https://bugzilla.kernel.org/show_bug.cgi?id=45881 > [2] http://thread.gmane.org/gmane.linux.kernel/1332810/focus=1341912 > > On Tue, 14 Aug 2012, Jerome Glisse <j.glisse@xxxxxxxxx> wrote: >> On Tue, Aug 14, 2012 at 10:54 AM, Adam Jackson <ajax@xxxxxxxxxx> wrote: >>> On 8/9/12 11:25 AM, j.glisse@xxxxxxxxx wrote: >>>> >>>> From: Jerome Glisse <jglisse@xxxxxxxxxx> >>>> >>>> Limit printing bad edid information at one time per connector. >>>> Connector that are connected to a bad monitor/kvm will likely >>>> stay connected to the same bad monitor/kvm and it makes no >>>> sense to keep printing the bad edid message. > > Do I understand correctly that bad_edid_counter is only reset when you > reboot or reload the module? So if you have a laptop that you connect to > the monitor at home, the monitor at the office, the projector in the > meeting room, and to a TV somewhere else, etc, the message about bad > EDID will only printed once? I don't think that's good. But please do > correct me if I'm wrong. I wanted to reset the counter any time the connector is connected to something with good edid but i did not do that in the end. I can do a patch on top if you think it would be nicer. That way only thing with bad edid will be printed once and assuming you don't repeatly alternate btw good and bad edid device you would not get spam. >>>> >>>> Signed-off-by: Jerome Glisse <jglisse@xxxxxxxxxx> >>> >>> >>> I guess. I don't see why we don't just move it into DRM_DEBUG_KMS if we're >>> going to suppress it, but this does what it says on the box. >>> >>> Reviewed-by: Adam Jackson <ajax@xxxxxxxxxx> >>> >>> - ajax >>> >> >> I think there is still value in getting at least once the bad edid. > > I think the raw edid dumps should be DEBUG level no matter what. Perhaps > some of the other messages could use WARNING/DEBUG too. And with that, > and my comment above, I not sure there really needs to be all that logic > to count errors and act differently further on. > No, i do think we want bad edid as normal log at least once per connector and we definitely don't want to spam bomb the log messages. Cheers, Jerome _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
