[PATCH v3 004/105] clk: bcm: Add BCM2711 DVP driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The HDMI block has a block that controls clocks and reset signals to the
HDMI0 and HDMI1 controllers.

Let's expose that through a clock driver implementing a clock and reset
provider.

Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: linux-clk@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
 drivers/clk/bcm/Kconfig           |  11 +++-
 drivers/clk/bcm/Makefile          |   1 +-
 drivers/clk/bcm/clk-bcm2711-dvp.c | 127 +++++++++++++++++++++++++++++++-
 3 files changed, 139 insertions(+)
 create mode 100644 drivers/clk/bcm/clk-bcm2711-dvp.c

diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index 8c83977a7dc4..784f12c72365 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -1,4 +1,15 @@
 # SPDX-License-Identifier: GPL-2.0-only
+
+config CLK_BCM2711_DVP
+	tristate "Broadcom BCM2711 DVP support"
+	depends on ARCH_BCM2835 ||COMPILE_TEST
+	depends on COMMON_CLK
+	default ARCH_BCM2835
+	select RESET_SIMPLE
+	help
+	  Enable common clock framework support for the Broadcom BCM2711
+	  DVP Controller.
+
 config CLK_BCM2835
 	bool "Broadcom BCM2835 clock support"
 	depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 0070ddf6cdd2..2c1349062147 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona-setup.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281xx.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm21664.o
 obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+obj-$(CONFIG_CLK_BCM2835)	+= clk-bcm2711-dvp.o
 obj-$(CONFIG_CLK_BCM2835)	+= clk-bcm2835.o
 obj-$(CONFIG_CLK_BCM2835)	+= clk-bcm2835-aux.o
 obj-$(CONFIG_CLK_RASPBERRYPI)	+= clk-raspberrypi.o
diff --git a/drivers/clk/bcm/clk-bcm2711-dvp.c b/drivers/clk/bcm/clk-bcm2711-dvp.c
new file mode 100644
index 000000000000..c1c4b5857d32
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm2711-dvp.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 Cerno
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/reset/reset-simple.h>
+
+#define DVP_HT_RPI_SW_INIT	0x04
+#define DVP_HT_RPI_MISC_CONFIG	0x08
+
+#define NR_CLOCKS	2
+#define NR_RESETS	6
+
+struct clk_dvp {
+	struct clk_hw_onecell_data	*data;
+	struct reset_simple_data	reset;
+};
+
+static const struct clk_parent_data clk_dvp_parent = {
+	.index	= 0,
+};
+
+static int clk_dvp_probe(struct platform_device *pdev)
+{
+	struct clk_hw_onecell_data *data;
+	struct resource *res;
+	struct clk_dvp *dvp;
+	void __iomem *base;
+	int ret;
+
+	dvp = devm_kzalloc(&pdev->dev, sizeof(*dvp), GFP_KERNEL);
+	if (!dvp)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, dvp);
+
+	dvp->data = devm_kzalloc(&pdev->dev,
+				 struct_size(dvp->data, hws, NR_CLOCKS),
+				 GFP_KERNEL);
+	if (!dvp->data)
+		return -ENOMEM;
+	data = dvp->data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	dvp->reset.rcdev.owner = THIS_MODULE;
+	dvp->reset.rcdev.nr_resets = NR_RESETS;
+	dvp->reset.rcdev.ops = &reset_simple_ops;
+	dvp->reset.rcdev.of_node = pdev->dev.of_node;
+	dvp->reset.membase = base + DVP_HT_RPI_SW_INIT;
+	spin_lock_init(&dvp->reset.lock);
+
+	ret = reset_controller_register(&dvp->reset.rcdev);
+	if (ret)
+		return ret;
+
+	data->hws[0] = clk_hw_register_gate_parent_data(&pdev->dev,
+							"hdmi0-108MHz",
+							&clk_dvp_parent, 0,
+							base + DVP_HT_RPI_MISC_CONFIG, 3,
+							CLK_GATE_SET_TO_DISABLE,
+							&dvp->reset.lock);
+	if (IS_ERR(data->hws[0])) {
+		ret = PTR_ERR(data->hws[0]);
+		goto unregister_reset;
+	}
+
+	data->hws[1] = clk_hw_register_gate_parent_data(&pdev->dev,
+							"hdmi1-108MHz",
+							&clk_dvp_parent, 0,
+							base + DVP_HT_RPI_MISC_CONFIG, 4,
+							CLK_GATE_SET_TO_DISABLE,
+							&dvp->reset.lock);
+	if (IS_ERR(data->hws[1])) {
+		ret = PTR_ERR(data->hws[1]);
+		goto unregister_clk0;
+	}
+
+	data->num = NR_CLOCKS;
+	ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
+				     data);
+	if (ret)
+		goto unregister_clk1;
+
+	return 0;
+
+unregister_clk1:
+	clk_hw_unregister_gate(data->hws[1]);
+
+unregister_clk0:
+	clk_hw_unregister_gate(data->hws[0]);
+
+unregister_reset:
+	reset_controller_unregister(&dvp->reset.rcdev);
+	return ret;
+};
+
+static int clk_dvp_remove(struct platform_device *pdev)
+{
+	struct clk_dvp *dvp = platform_get_drvdata(pdev);
+	struct clk_hw_onecell_data *data = dvp->data;
+
+	clk_hw_unregister_gate(data->hws[1]);
+	clk_hw_unregister_gate(data->hws[0]);
+	reset_controller_unregister(&dvp->reset.rcdev);
+
+	return 0;
+}
+
+static const struct of_device_id clk_dvp_dt_ids[] = {
+	{ .compatible = "brcm,brcm2711-dvp", },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver clk_dvp_driver = {
+	.probe	= clk_dvp_probe,
+	.remove	= clk_dvp_remove,
+	.driver	= {
+		.name		= "brcm2711-dvp",
+		.of_match_table	= clk_dvp_dt_ids,
+	},
+};
+module_platform_driver(clk_dvp_driver);
-- 
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux