Hi Mattias,
Thanks for your comment.
On Sat, 2020-05-16 at 20:14 +0200, Matthias Brugger wrote:
>
> On 08/03/2020 11:52, Dennis YC Hsieh wrote:
> > add write_s function in cmdq helper functions which
> > writes value contains in internal register to address
> > with large dma access support.
> >
> > Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@xxxxxxxxxxxx>
> > Reviewed-by: CK Hu <ck.hu@xxxxxxxxxxxx>
> > ---
> > drivers/soc/mediatek/mtk-cmdq-helper.c | 34 +++++++++++++++++++++++-
> > include/linux/mailbox/mtk-cmdq-mailbox.h | 2 ++
> > include/linux/soc/mediatek/mtk-cmdq.h | 20 ++++++++++++++
> > 3 files changed, 55 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > index 33153d17c9d9..90f1ff2b4b00 100644
> > --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > @@ -18,6 +18,10 @@ struct cmdq_instruction {
> > union {
> > u32 value;
> > u32 mask;
> > + struct {
> > + u16 arg_c;
> > + u16 src_reg;
> > + };
> > };
> > union {
> > u16 offset;
> > @@ -29,7 +33,7 @@ struct cmdq_instruction {
> > struct {
> > u8 sop:5;
> > u8 arg_c_t:1;
> > - u8 arg_b_t:1;
> > + u8 src_t:1;
>
> fixing patch 6/13 please. seems the struct should be added in this patch.
ok, will move to this patch.
>
> > u8 dst_t:1;
> > };
> > };
> > @@ -222,6 +226,34 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
> > }
> > EXPORT_SYMBOL(cmdq_pkt_write_mask);
> >
> > +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> > + u16 addr_low, u16 src_reg_idx, u32 mask)
> > +{
> > + struct cmdq_instruction inst = { {0} };
> > + int err;
> > +
> > + if (mask != U32_MAX) {
> > + inst.op = CMDQ_CODE_MASK;
> > + inst.mask = ~mask;
> > + err = cmdq_pkt_append_command(pkt, inst);
> > + if (err < 0)
> > + return err;
> > +
> > + inst.mask = 0;
> > + inst.op = CMDQ_CODE_WRITE_S_MASK;
> > + } else {
> > + inst.op = CMDQ_CODE_WRITE_S;
> > + }
> > +
> > + inst.src_t = CMDQ_REG_TYPE;
>
> Not defined.
> Please make sure that every patch compiles on it's own and does not add a
> regression. This is very helpful if we have to bisect the kernel in the future.
May I know which part not defined? The src_t defined on top of this
patch and CMDQ_REG_TYPE defined in last patc (see 06/13).
>
> > + inst.sop = high_addr_reg_idx;
> > + inst.offset = addr_low;
> > + inst.src_reg = src_reg_idx;
> > +
> > + return cmdq_pkt_append_command(pkt, inst);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_write_s);
> > +
> > int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
> > {
> > struct cmdq_instruction inst = { {0} };
> > diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> > index 121c3bb6d3de..8ef87e1bd03b 100644
> > --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> > +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> > @@ -59,6 +59,8 @@ enum cmdq_code {
> > CMDQ_CODE_JUMP = 0x10,
> > CMDQ_CODE_WFE = 0x20,
> > CMDQ_CODE_EOC = 0x40,
> > + CMDQ_CODE_WRITE_S = 0x90,
> > + CMDQ_CODE_WRITE_S_MASK = 0x91,
> > CMDQ_CODE_LOGIC = 0xa0,
> > };
> >
> > diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> > index 83340211e1d3..c72d826d8934 100644
> > --- a/include/linux/soc/mediatek/mtk-cmdq.h
> > +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> > @@ -12,6 +12,8 @@
> > #include <linux/timer.h>
> >
> > #define CMDQ_NO_TIMEOUT 0xffffffffu
> > +#define CMDQ_ADDR_HIGH(addr) ((u32)(((addr) >> 16) & GENMASK(31, 0)))
> > +#define CMDQ_ADDR_LOW(addr) ((u16)(addr) | BIT(1))
> >
> > struct cmdq_pkt;
> >
> > @@ -102,6 +104,24 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
> > int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
> > u16 offset, u32 value, u32 mask);
> >
> > +/**
> > + * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
> > + * @pkt: the CMDQ packet
> > + * @high_addr_reg_idx: internal regisger ID which contains high address of pa
>
> s/regisger/register
will fix
>
> > + * @addr_low: low address of pa
> > + * @src_reg_idx: the CMDQ internal register ID which cache source value
> > + * @mask: the specified target address mask, use U32_MAX if no need
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + *
> > + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
> > + * to get high addrees and call cmdq_pkt_assign() to assign value into internal
>
> s/addrees/address
will fix
>
> > + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameterwhen
>
> s/parameterwhen/parameter when
will fix
>
> > + * call to this function.
> > + */
> > +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> > + u16 addr_low, u16 src_reg_idx, u32 mask);
> > +
>
> In general I wonder if we shouldn't provide two functions, one that writes a
> mask and on for the else case.
ok, I'll separate this function to cmdq_pkt_write_s and
cmdq_pkt_write_s_mask. Let the client choose which case is more
suitable.
>
> Regards,
> Matthias
>
> > /**
> > * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> > * @pkt: the CMDQ packet
> >
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
