There are two requirements that we need to move the request
of dma channel from probe to open.
- When dma device binds with power-domains, the power will
be enabled when we request dma channel. If the request of dma
channel happen on probe, then the power-domains will be always
enabled after kernel boot up, which is not good for power
saving, so we need to move the request of dma channel to .open();
- With FE-BE case, if the dma channel is requested in probe,
then there will be below issue, which is caused by that the
dma channel will be requested duplicately
[ 638.906268] sysfs: cannot create duplicate filename '/devices/soc0/soc/2000000.bus/2000000.spba-bus/2024000.esai/dma:tx'
[ 638.919061] CPU: 1 PID: 673 Comm: aplay Not tainted 5.7.0-rc1-12956-gfc64b2585593 #287
[ 638.927113] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 638.933690] [<c0110dd8>] (unwind_backtrace) from [<c010b8ec>] (show_stack+0x10/0x14)
[ 638.941464] [<c010b8ec>] (show_stack) from [<c0557fc0>] (dump_stack+0xe4/0x118)
[ 638.948808] [<c0557fc0>] (dump_stack) from [<c032aeb4>] (sysfs_warn_dup+0x50/0x64)
[ 638.956406] [<c032aeb4>] (sysfs_warn_dup) from [<c032b1a8>] (sysfs_do_create_link_sd+0xc8/0xd4)
[ 638.965134] [<c032b1a8>] (sysfs_do_create_link_sd) from [<c05dc668>] (dma_request_chan+0xb0/0x210)
[ 638.974120] [<c05dc668>] (dma_request_chan) from [<c05dc7d0>] (dma_request_slave_channel+0x8/0x14)
[ 638.983111] [<c05dc7d0>] (dma_request_slave_channel) from [<c09d5548>] (fsl_asrc_dma_hw_params+0x1e0/0x438)
[ 638.992881] [<c09d5548>] (fsl_asrc_dma_hw_params) from [<c09c1654>] (soc_pcm_hw_params+0x4a0/0x6a8)
[ 639.001952] [<c09c1654>] (soc_pcm_hw_params) from [<c09c39d4>] (dpcm_fe_dai_hw_params+0x70/0xe4)
[ 639.010765] [<c09c39d4>] (dpcm_fe_dai_hw_params) from [<c099b274>] (snd_pcm_hw_params+0x158/0x418)
[ 639.019750] [<c099b274>] (snd_pcm_hw_params) from [<c099c5a0>] (snd_pcm_ioctl+0x734/0x183c)
[ 639.028129] [<c099c5a0>] (snd_pcm_ioctl) from [<c029ff94>] (ksys_ioctl+0x2ac/0xb98)
[ 639.035812] [<c029ff94>] (ksys_ioctl) from [<c0100080>] (ret_fast_syscall+0x0/0x28)
[ 639.043490] Exception stack(0xec529fa8 to 0xec529ff0)
[ 639.048565] 9fa0: bee84650 01321870 00000004 c25c4111 bee84650 0002000f
[ 639.056766] 9fc0: bee84650 01321870 01321820 00000036 00001f40 00000000 0002c2f8 00000003
[ 639.064964] 9fe0: b6f483fc bee8451c b6ee2655 b6e1dcf8
[ 639.070339] fsl-esai-dai 2024000.esai: Cannot create DMA dma:tx symlink
Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
---
sound/soc/fsl/imx-pcm-dma.c | 173 +++++++++++++++++++++++++++++++++---
1 file changed, 159 insertions(+), 14 deletions(-)
diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c
index 04a9bc749016..dae53b384df4 100644
--- a/sound/soc/fsl/imx-pcm-dma.c
+++ b/sound/soc/fsl/imx-pcm-dma.c
@@ -11,6 +11,7 @@
#include <linux/dmaengine.h>
#include <linux/types.h>
#include <linux/module.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -29,24 +30,168 @@ static bool filter(struct dma_chan *chan, void *param)
return true;
}
-static const struct snd_dmaengine_pcm_config imx_dmaengine_pcm_config = {
- .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
- .compat_filter_fn = filter,
-};
+static int imx_pcm_hw_params(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ struct snd_dmaengine_dai_dma_data *dma_data;
+ struct dma_slave_config config;
+ struct dma_chan *chan;
+ int ret = 0;
-int imx_pcm_dma_init(struct platform_device *pdev, size_t size)
+ snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+ runtime->dma_bytes = params_buffer_bytes(params);
+
+ chan = snd_dmaengine_pcm_get_chan(substream);
+ if (!chan)
+ return -EINVAL;
+
+ ret = snd_hwparams_to_dma_slave_config(substream, params, &config);
+ if (ret)
+ return ret;
+
+ dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream);
+ if (!dma_data)
+ return -EINVAL;
+
+ snd_dmaengine_pcm_set_config_from_dai_data(substream,
+ dma_data,
+ &config);
+ return dmaengine_slave_config(chan, &config);
+}
+
+static int imx_pcm_hw_free(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
{
- struct snd_dmaengine_pcm_config *config;
+ snd_pcm_set_runtime_buffer(substream, NULL);
+ return 0;
+}
+
+static snd_pcm_uframes_t imx_pcm_pointer(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
+{
+ return snd_dmaengine_pcm_pointer(substream);
+}
+
+static int imx_pcm_trigger(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream, int cmd)
+{
+ return snd_dmaengine_pcm_trigger(substream, cmd);
+}
+
+static int imx_pcm_open(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+ struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ struct snd_dmaengine_dai_dma_data *dma_data;
+ struct device *dev = component->dev;
+ struct snd_pcm_hardware hw;
+ struct dma_chan *chan;
+ int ret;
+
+ ret = snd_pcm_hw_constraint_integer(substream->runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0) {
+ dev_err(dev, "failed to set pcm hw params periods\n");
+ return ret;
+ }
+
+ dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream);
+ if (!dma_data)
+ return -EINVAL;
+
+ chan = dma_request_slave_channel(cpu_dai->dev, tx ? "tx" : "rx");
+ if (!chan) {
+ /* Try to request channel using compat_filter_fn */
+ chan = snd_dmaengine_pcm_request_channel(filter,
+ dma_data->filter_data);
+ if (!chan)
+ return -ENXIO;
+ }
- config = devm_kzalloc(&pdev->dev,
- sizeof(struct snd_dmaengine_pcm_config), GFP_KERNEL);
- if (!config)
- return -ENOMEM;
- *config = imx_dmaengine_pcm_config;
+ ret = snd_dmaengine_pcm_open(substream, chan);
+ if (ret)
+ goto pcm_open_fail;
- return devm_snd_dmaengine_pcm_register(&pdev->dev,
- config,
- SND_DMAENGINE_PCM_FLAG_COMPAT);
+ memset(&hw, 0, sizeof(hw));
+ hw.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED;
+ hw.periods_min = 2;
+ hw.periods_max = UINT_MAX;
+ hw.period_bytes_min = 256;
+ hw.period_bytes_max = dma_get_max_seg_size(chan->device->dev);
+ hw.buffer_bytes_max = IMX_DEFAULT_DMABUF_SIZE;
+ hw.fifo_size = dma_data->fifo_size;
+
+ /* Refine the hw according to caps of DMA. */
+ ret = snd_dmaengine_pcm_refine_runtime_hwparams(substream,
+ dma_data,
+ &hw,
+ chan);
+ if (ret < 0)
+ goto refine_runtime_hwparams_fail;
+
+ snd_soc_set_runtime_hwparams(substream, &hw);
+
+ /* Support allocate memory from IRAM */
+ ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_IRAM,
+ chan->device->dev,
+ hw.buffer_bytes_max,
+ &substream->dma_buffer);
+ if (ret < 0)
+ goto alloc_pagas_fail;
+
+ return 0;
+
+alloc_pagas_fail:
+refine_runtime_hwparams_fail:
+ snd_dmaengine_pcm_close(substream);
+pcm_open_fail:
+ dma_release_channel(chan);
+
+ return ret;
+}
+
+static int imx_pcm_close(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
+{
+ if (substream) {
+ snd_dma_free_pages(&substream->dma_buffer);
+ substream->dma_buffer.area = NULL;
+ substream->dma_buffer.addr = 0;
+ }
+
+ return snd_dmaengine_pcm_close_release_chan(substream);
+}
+
+static int imx_pcm_new(struct snd_soc_component *component,
+ struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_card *card = rtd->card->snd_card;
+
+ return dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32));
+}
+
+static const struct snd_soc_component_driver imx_pcm_component = {
+ .name = "imx-pcm-dma",
+ .pcm_construct = imx_pcm_new,
+ .open = imx_pcm_open,
+ .close = imx_pcm_close,
+ .hw_params = imx_pcm_hw_params,
+ .hw_free = imx_pcm_hw_free,
+ .trigger = imx_pcm_trigger,
+ .pointer = imx_pcm_pointer,
+};
+
+int imx_pcm_dma_init(struct platform_device *pdev, size_t size)
+{
+ return devm_snd_soc_register_component(&pdev->dev,
+ &imx_pcm_component, NULL, 0);
}
EXPORT_SYMBOL_GPL(imx_pcm_dma_init);
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
