This will be handled via the mux-input-bridge. Signed-off-by: Guido Günther <agx@xxxxxxxxxxx> --- drivers/gpu/drm/bridge/Kconfig | 1 - drivers/gpu/drm/bridge/nwl-dsi.c | 61 -------------------------------- 2 files changed, 62 deletions(-) diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 3886c0f41bdd..11444f841e35 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -78,7 +78,6 @@ config DRM_NWL_MIPI_DSI select DRM_PANEL_BRIDGE select GENERIC_PHY_MIPI_DPHY select MFD_SYSCON - select MULTIPLEXER select REGMAP_MMIO help This enables the Northwest Logic MIPI DSI Host controller as diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c index b14d725bf609..8839f333f39c 100644 --- a/drivers/gpu/drm/bridge/nwl-dsi.c +++ b/drivers/gpu/drm/bridge/nwl-dsi.c @@ -12,7 +12,6 @@ #include <linux/math64.h> #include <linux/mfd/syscon.h> #include <linux/module.h> -#include <linux/mux/consumer.h> #include <linux/of.h> #include <linux/of_platform.h> #include <linux/phy/phy.h> @@ -44,9 +43,6 @@ enum transfer_direction { DSI_PACKET_RECEIVE, }; -#define NWL_DSI_ENDPOINT_LCDIF 0 -#define NWL_DSI_ENDPOINT_DCSS 1 - struct nwl_dsi_plat_clk_config { const char *id; struct clk *clk; @@ -94,7 +90,6 @@ struct nwl_dsi { struct reset_control *rst_esc; struct reset_control *rst_dpi; struct reset_control *rst_pclk; - struct mux_control *mux; /* DSI clocks */ struct clk *phy_ref_clk; @@ -1018,14 +1013,6 @@ static int nwl_dsi_parse_dt(struct nwl_dsi *dsi) } dsi->tx_esc_clk = clk; - dsi->mux = devm_mux_control_get(dsi->dev, NULL); - if (IS_ERR(dsi->mux)) { - ret = PTR_ERR(dsi->mux); - if (ret != -EPROBE_DEFER) - DRM_DEV_ERROR(dsi->dev, "Failed to get mux: %d\n", ret); - return ret; - } - base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); @@ -1073,47 +1060,6 @@ static int nwl_dsi_parse_dt(struct nwl_dsi *dsi) return 0; } -static int nwl_dsi_select_input(struct nwl_dsi *dsi) -{ - struct device_node *remote; - u32 use_dcss = 1; - int ret; - - remote = of_graph_get_remote_node(dsi->dev->of_node, 0, - NWL_DSI_ENDPOINT_LCDIF); - if (remote) { - use_dcss = 0; - } else { - remote = of_graph_get_remote_node(dsi->dev->of_node, 0, - NWL_DSI_ENDPOINT_DCSS); - if (!remote) { - DRM_DEV_ERROR(dsi->dev, - "No valid input endpoint found\n"); - return -EINVAL; - } - } - - DRM_DEV_INFO(dsi->dev, "Using %s as input source\n", - (use_dcss) ? "DCSS" : "LCDIF"); - ret = mux_control_try_select(dsi->mux, use_dcss); - if (ret < 0) - DRM_DEV_ERROR(dsi->dev, "Failed to select input: %d\n", ret); - - of_node_put(remote); - return ret; -} - -static int nwl_dsi_deselect_input(struct nwl_dsi *dsi) -{ - int ret; - - ret = mux_control_deselect(dsi->mux); - if (ret < 0) - DRM_DEV_ERROR(dsi->dev, "Failed to deselect input: %d\n", ret); - - return ret; -} - static const struct drm_bridge_timings nwl_dsi_timings = { .input_bus_flags = DRM_BUS_FLAG_DE_LOW, }; @@ -1175,12 +1121,6 @@ static int nwl_dsi_probe(struct platform_device *pdev) dev_set_drvdata(dev, dsi); pm_runtime_enable(dev); - ret = nwl_dsi_select_input(dsi); - if (ret < 0) { - mipi_dsi_host_unregister(&dsi->dsi_host); - return ret; - } - drm_bridge_add(&dsi->bridge); return 0; } @@ -1189,7 +1129,6 @@ static int nwl_dsi_remove(struct platform_device *pdev) { struct nwl_dsi *dsi = platform_get_drvdata(pdev); - nwl_dsi_deselect_input(dsi); mipi_dsi_host_unregister(&dsi->dsi_host); drm_bridge_remove(&dsi->bridge); pm_runtime_disable(&pdev->dev); -- 2.26.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel