Both of the two LVDS channels should be disabled for split mode in the encoder's ->disable() callback, because they are enabled in the encoder's ->enable() callback. Fixes: 6556f7f82b9c ("drm: imx: Move imx-drm driver out of staging") Cc: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx> Cc: NXP Linux Team <linux-imx@xxxxxxx> Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: Liu Ying <victor.liu@xxxxxxx> --- drivers/gpu/drm/imx/imx-ldb.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index 4da22a9..af4d0d8 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -303,18 +303,19 @@ static void imx_ldb_encoder_disable(struct drm_encoder *encoder) { struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder); struct imx_ldb *ldb = imx_ldb_ch->ldb; + int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN; int mux, ret; drm_panel_disable(imx_ldb_ch->panel); - if (imx_ldb_ch == &ldb->channel[0]) + if (imx_ldb_ch == &ldb->channel[0] || dual) ldb->ldb_ctrl &= ~LDB_CH0_MODE_EN_MASK; - else if (imx_ldb_ch == &ldb->channel[1]) + if (imx_ldb_ch == &ldb->channel[1] || dual) ldb->ldb_ctrl &= ~LDB_CH1_MODE_EN_MASK; regmap_write(ldb->regmap, IOMUXC_GPR2, ldb->ldb_ctrl); - if (ldb->ldb_ctrl & LDB_SPLIT_MODE_EN) { + if (dual) { clk_disable_unprepare(ldb->clk[0]); clk_disable_unprepare(ldb->clk[1]); } -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel