Convert the ingenic,jz4780-nemc.txt doc file to ingenic,nemc.yaml.
The ingenic,jz4725b-nemc compatible string was added in the process,
with a fallback to ingenic,jz4740-nemc.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
.../ingenic,jz4780-nemc.txt | 76 ---------------
.../ingenic,nemc-client.yaml | 45 +++++++++
.../memory-controllers/ingenic,nemc.yaml | 95 +++++++++++++++++++
3 files changed, 140 insertions(+), 76 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-client.yaml
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt b/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt
deleted file mode 100644
index 59b8dcc118ee..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-* Ingenic JZ4780 NAND/external memory controller (NEMC)
-
-This file documents the device tree bindings for the NEMC external memory
-controller in Ingenic JZ4780
-
-Required properties:
-- compatible: Should be set to one of:
- "ingenic,jz4740-nemc" (JZ4740)
- "ingenic,jz4780-nemc" (JZ4780)
-- reg: Should specify the NEMC controller registers location and length.
-- clocks: Clock for the NEMC controller.
-- #address-cells: Must be set to 2.
-- #size-cells: Must be set to 1.
-- ranges: A set of ranges for each bank describing the physical memory layout.
- Each should specify the following 4 integer values:
-
- <cs number> 0 <physical address of mapping> <size of mapping>
-
-Each child of the NEMC node describes a device connected to the NEMC.
-
-Required child node properties:
-- reg: Should contain at least one register specifier, given in the following
- format:
-
- <cs number> <offset> <size>
-
- Multiple registers can be specified across multiple banks. This is needed,
- for example, for packaged NAND devices with multiple dies. Such devices
- should be grouped into a single node.
-
-Optional child node properties:
-- ingenic,nemc-bus-width: Specifies the bus width in bits. Defaults to 8 bits.
-- ingenic,nemc-tAS: Address setup time in nanoseconds.
-- ingenic,nemc-tAH: Address hold time in nanoseconds.
-- ingenic,nemc-tBP: Burst pitch time in nanoseconds.
-- ingenic,nemc-tAW: Access wait time in nanoseconds.
-- ingenic,nemc-tSTRV: Static memory recovery time in nanoseconds.
-
-If a child node references multiple banks in its "reg" property, the same value
-for all optional parameters will be configured for all banks. If any optional
-parameters are omitted, they will be left unchanged from whatever they are
-configured to when the NEMC device is probed (which may be the reset value as
-given in the hardware reference manual, or a value configured by the boot
-loader).
-
-Example (NEMC node with a NAND child device attached at CS1):
-
-nemc: nemc@13410000 {
- compatible = "ingenic,jz4780-nemc";
- reg = <0x13410000 0x10000>;
-
- #address-cells = <2>;
- #size-cells = <1>;
-
- ranges = <1 0 0x1b000000 0x1000000
- 2 0 0x1a000000 0x1000000
- 3 0 0x19000000 0x1000000
- 4 0 0x18000000 0x1000000
- 5 0 0x17000000 0x1000000
- 6 0 0x16000000 0x1000000>;
-
- clocks = <&cgu JZ4780_CLK_NEMC>;
-
- nand: nand@1 {
- compatible = "ingenic,jz4780-nand";
- reg = <1 0 0x1000000>;
-
- ingenic,nemc-tAS = <10>;
- ingenic,nemc-tAH = <5>;
- ingenic,nemc-tBP = <10>;
- ingenic,nemc-tAW = <15>;
- ingenic,nemc-tSTRV = <100>;
-
- ...
- };
-};
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-client.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-client.yaml
new file mode 100644
index 000000000000..682e6f7e74fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-client.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc-client.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+ Ingenic SoCs NAND / External Memory Controller (NEMC)
+ client-specific properties
+
+maintainers:
+ - Paul Cercueil <paul@xxxxxxxxxxxxxxx>
+
+description:
+ This document lists the various properties that child nodes of the NEMC node
+ can use.
+
+properties:
+ ingenic,nemc-bus-width:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [8, 16]
+ description: Specifies the bus width in bits.
+
+ ingenic,nemc-tAS:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Address setup time in nanoseconds.
+
+ ingenic,nemc-tAH:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Address hold time in nanoseconds.
+
+ ingenic,nemc-tBP:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Burst pitch time in nanoseconds.
+
+ ingenic,nemc-tAW:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Address wait time in nanoseconds.
+
+ ingenic,nemc-tSTRV:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Static memory recovery time in nanoseconds.
+
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
new file mode 100644
index 000000000000..c7fd28462fd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs NAND / External Memory Controller (NEMC) devicetree bindings
+
+maintainers:
+ - Paul Cercueil <paul@xxxxxxxxxxxxxxx>
+
+properties:
+ $nodename:
+ pattern: "^memory-controller@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4740-nemc
+ - ingenic,jz4780-nemc
+ - items:
+ - const: ingenic,jz4725b-nemc
+ - const: ingenic,jz4740-nemc
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+patternProperties:
+ "^(nand-controller|ethernet)@[0-9]+$":
+ type: object
+ allOf:
+ - $ref: ingenic,nemc-client.yaml#
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4780-cgu.h>
+ #include <dt-bindings/gpio/gpio.h>
+ nemc: memory-controller@13410000 {
+ compatible = "ingenic,jz4780-nemc";
+ reg = <0x13410000 0x10000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0x1b000000 0x1000000>,
+ <2 0 0x1a000000 0x1000000>,
+ <3 0 0x19000000 0x1000000>,
+ <4 0 0x18000000 0x1000000>,
+ <5 0 0x17000000 0x1000000>,
+ <6 0 0x16000000 0x1000000>;
+
+ clocks = <&cgu JZ4780_CLK_NEMC>;
+
+ ethernet@6 {
+ compatible = "davicom,dm9000";
+ davicom,no-eeprom;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc_cs6>;
+
+ reg = <6 0 1>, /* addr */
+ <6 2 1>; /* data */
+
+ ingenic,nemc-tAS = <15>;
+ ingenic,nemc-tAH = <10>;
+ ingenic,nemc-tBP = <20>;
+ ingenic,nemc-tAW = <50>;
+ ingenic,nemc-tSTRV = <100>;
+
+ reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>;
+ vcc-supply = <ð0_power>;
+
+ interrupt-parent = <&gpe>;
+ interrupts = <19 4>;
+ };
+ };
--
2.26.2
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
