Convert the i2c-jz4780.txt file to ingenic,i2c.yaml.
Two things were changed in the process:
- the clock-frequency property can now only be set to the two values
that can be set by the hardware;
- the dmas and dma-names properties are now required.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
.../devicetree/bindings/i2c/i2c-jz4780.txt | 33 --------
.../devicetree/bindings/i2c/ingenic,i2c.yaml | 83 +++++++++++++++++++
2 files changed, 83 insertions(+), 33 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
create mode 100644 Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
diff --git a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
deleted file mode 100644
index d229eff5ca1b..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Ingenic JZ4780 I2C Bus controller
-
-Required properties:
-- compatible: should be one of the following:
- - "ingenic,jz4780-i2c" for the JZ4780
- - "ingenic,x1000-i2c" for the X1000
-- reg: Should contain the address & size of the I2C controller registers.
-- interrupts: Should specify the interrupt provided by parent.
-- clocks: Should contain a single clock specifier for the JZ4780 I2C clock.
-- clock-frequency: desired I2C bus clock frequency in Hz.
-
-Recommended properties:
-- pinctrl-names: should be "default";
-- pinctrl-0: phandle to pinctrl function
-
-Example
-
-/ {
- i2c4: i2c4@10054000 {
- compatible = "ingenic,jz4780-i2c";
- reg = <0x10054000 0x1000>;
-
- interrupt-parent = <&intc>;
- interrupts = <56>;
-
- clocks = <&cgu JZ4780_CLK_SMB4>;
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pins_i2c4_data>;
-
- };
-};
-
diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
new file mode 100644
index 000000000000..4759b9a3eb18
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/ingenic,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs I2C controller devicetree bindings
+
+maintainers:
+ - Paul Cercueil <paul@xxxxxxxxxxxxxxx>
+
+properties:
+ $nodename:
+ pattern: "^i2c@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - ingenic,jz4780-i2c
+ - ingenic,x1000-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-frequency:
+ enum: [ 100000, 400000 ]
+
+ dmas:
+ items:
+ - description: DMA controller phandle and request line for RX
+ - description: DMA controller phandle and request line for TX
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-frequency
+ - dmas
+ - dma-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4780-cgu.h>
+ #include <dt-bindings/dma/jz4780-dma.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c@10054000 {
+ compatible = "ingenic,jz4780-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10054000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <56>;
+
+ clocks = <&cgu JZ4780_CLK_SMB4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c4_data>;
+
+ dmas = <&dma JZ4780_DMA_SMB4_RX 0xffffffff>,
+ <&dma JZ4780_DMA_SMB4_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ clock-frequency = <400000>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+
+ interrupt-parent = <&gpf>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
--
2.26.2
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
