Re: [PATCH v3 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 17, 2020 at 05:06:07PM +0200, Enric Balletbo i Serra wrote:
> The PS8640 dsi-to-eDP bridge driver is using the panel bridge API,
> however, not all the components in the chain have been ported to the
> drm_bridge API. Actually, when a panel is attached the default panel's mode
> is used, but in some cases we can't get display up if mode getting from
> eDP control EDID is not chosen.
> 
> This series address that problem, first implements the .get_edid()
> callback in the PS8640 driver (which is not used until the conversion is
> done) and then, converts the Mediatek DSI driver to use the drm_bridge
> API.
> 
> As far as I know, we're the only users of the mediatek dsi driver in
> mainline, so should be safe to switch to the new chain of drm_bridge API
> unconditionally.
> 
> The patches has been tested on a Acer Chromebook R13 (Elm) running a
> Chrome OS userspace and checking that the valid EDID mode reported by
> the bridge is selected.
> 
> [1] https://lore.kernel.org/lkml/20200210063523.133333-1-hsinyi@xxxxxxxxxxxx/
> 
> Changes in v3:
> - Replace s/bridge/next bridge/ for comment. (Laurent Pinchart)
> - Add the bridge.type. (Laurent Pinchart)
> - Use next_bridge field to store the panel bridge. (Laurent Pinchart)
> - Add the bridge.type field. (Laurent Pinchart)
> - This patch requires https://lkml.org/lkml/2020/4/16/2080 to work
>   properly.
This patch is now applied to drm-misc-next.
IMO this patchset could go in now.


> - Move the bridge.type line to the patch that adds drm_bridge support. (Laurent Pinchart)
> 
> Changes in v2:
> - Do not set connector_type for panel here. (Sam Ravnborg)
> 
> Enric Balletbo i Serra (7):
>   drm/bridge: ps8640: Get the EDID from eDP control
>   drm/bridge_connector: Set default status connected for eDP connectors
>   drm/mediatek: mtk_dsi: Rename bridge to next_bridge
>   drm/mediatek: mtk_dsi: Convert to bridge driver
>   drm/mediatek: mtk_dsi: Use simple encoder
>   drm/mediatek: mtk_dsi: Use the drm_panel_bridge API
>   drm/mediatek: mtk_dsi: Create connector for bridges
All patches:
Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx>


> 
>  drivers/gpu/drm/bridge/parade-ps8640.c |  12 ++
>  drivers/gpu/drm/drm_bridge_connector.c |   1 +
>  drivers/gpu/drm/mediatek/mtk_dsi.c     | 276 ++++++++-----------------
>  3 files changed, 96 insertions(+), 193 deletions(-)
> 
> -- 
> 2.25.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux