The RaspberryPi4 firmware actually exposes more clocks than are currently
handled by the driver and we will need to change some of them directly
based on the pixel rate for the display related clocks, or the load for the
GPU.
This rate change can have a number of side-effects, including adjusting the
various PLL voltages or the PLL parents. The firmware will also update
those clocks by itself for example if the SoC runs too hot.
In order to make Linux play as nice as possible with those constraints, it
makes sense to rely on the firmware clocks as much as possible.
Fortunately,t he firmware has an interface to discover the clocks it
exposes.
Let's use it to discover, register the clocks in the clocks framework and
then expose them through the device tree for consumers to use them.
Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
Cc: linux-clk@xxxxxxxxxxxxxxx
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
drivers/clk/bcm/clk-raspberrypi.c | 104 +++++++++++++++++++---
include/soc/bcm2835/raspberrypi-firmware.h | 5 +-
2 files changed, 97 insertions(+), 12 deletions(-)
diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 1a9027169a2a..6a789749aea6 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -285,6 +285,95 @@ static struct clk_hw *raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi)
return &raspberrypi_clk_pllb_arm.hw;
}
+static long raspberrypi_fw_dumb_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ /*
+ * The firmware will do the rounding but that isn't part of
+ * the interface with the firmware, so we just do our best
+ * here.
+ */
+ return rate;
+}
+
+static const struct clk_ops raspberrypi_firmware_clk_ops = {
+ .is_prepared = raspberrypi_fw_is_prepared,
+ .recalc_rate = raspberrypi_fw_get_rate,
+ .round_rate = raspberrypi_fw_dumb_round_rate,
+ .set_rate = raspberrypi_fw_set_rate,
+};
+
+static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi,
+ unsigned int parent,
+ unsigned int id)
+{
+ struct raspberrypi_clk_data *data;
+ struct clk_init_data init = {};
+ int ret;
+
+ if (id == RPI_FIRMWARE_ARM_CLK_ID) {
+ struct clk_hw *hw;
+
+ hw = raspberrypi_register_pllb(rpi);
+ if (IS_ERR(hw)) {
+ dev_err(rpi->dev, "Failed to initialize pllb, %ld\n",
+ PTR_ERR(hw));
+ return hw;
+ }
+
+ return raspberrypi_register_pllb_arm(rpi);
+ }
+
+ data = devm_kzalloc(rpi->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return ERR_PTR(-ENOMEM);
+ data->rpi = rpi;
+ data->id = id;
+
+ init.name = devm_kasprintf(rpi->dev, GFP_KERNEL, "fw-clk-%u", id);
+ init.ops = &raspberrypi_firmware_clk_ops;
+ init.flags = CLK_GET_RATE_NOCACHE;
+
+ data->hw.init = &init;
+
+ ret = devm_clk_hw_register(rpi->dev, &data->hw);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return &data->hw;
+}
+
+static int raspberrypi_discover_clocks(struct raspberrypi_clk *rpi,
+ struct clk_hw_onecell_data *data)
+{
+ struct rpi_firmware_get_clocks_response *clks;
+ int ret;
+
+ clks = devm_kcalloc(rpi->dev, sizeof(*clks), NUM_FW_CLKS, GFP_KERNEL);
+ if (!clks)
+ return -ENOMEM;
+
+ ret = rpi_firmware_property(rpi->firmware, RPI_FIRMWARE_GET_CLOCKS,
+ clks, sizeof(*clks) * NUM_FW_CLKS);
+ if (ret)
+ return ret;
+
+ while (clks->id) {
+ struct clk_hw *hw;
+
+ hw = raspberrypi_clk_register(rpi, clks->parent, clks->id);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ data->hws[clks->id] = hw;
+ data->num = clks->id + 1;
+ clks++;
+ }
+
+ return 0;
+}
+
static int raspberrypi_clk_probe(struct platform_device *pdev)
{
struct clk_hw_onecell_data *clk_data;
@@ -292,7 +381,6 @@ static int raspberrypi_clk_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct rpi_firmware *firmware;
struct raspberrypi_clk *rpi;
- struct clk_hw *hw;
int ret;
/*
@@ -327,17 +415,9 @@ static int raspberrypi_clk_probe(struct platform_device *pdev)
if (!clk_data)
return -ENOMEM;
- hw = raspberrypi_register_pllb(rpi);
- if (IS_ERR(hw)) {
- dev_err(dev, "Failed to initialize pllb, %ld\n", PTR_ERR(hw));
- return PTR_ERR(hw);
- }
-
- hw = raspberrypi_register_pllb_arm(rpi);
- if (IS_ERR(hw))
- return PTR_ERR(hw);
- clk_data->hws[RPI_FIRMWARE_ARM_CLK_ID] = hw;
- clk_data->num = RPI_FIRMWARE_ARM_CLK_ID + 1;
+ ret = raspberrypi_discover_clocks(rpi, clk_data);
+ if (ret)
+ return ret;
ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
clk_data);
diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
index 7800e12ee042..27bfc0dcfa9b 100644
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -135,6 +135,11 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001,
};
+struct rpi_firmware_get_clocks_response {
+ __le32 parent;
+ __le32 id;
+};
+
#if IS_ENABLED(CONFIG_RASPBERRYPI_FIRMWARE)
int rpi_firmware_property(struct rpi_firmware *fw,
u32 tag, void *data, size_t len);
--
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
