Hi Sandeep, On Tue, Apr 14, 2020 at 02:21:17PM -0700, Stephen Boyd wrote: > Quoting Sandeep Maheswaram (2020-04-01 23:38:52) > > Convert QMP PHY bindings to DT schema format using json-schema. > > > > Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx> > > --- > > .../devicetree/bindings/phy/qcom,qmp-phy.yaml | 332 +++++++++++++++++++++ > > .../devicetree/bindings/phy/qcom-qmp-phy.txt | 242 --------------- > > 2 files changed, 332 insertions(+), 242 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > > delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt > > > > diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > > new file mode 100644 > > index 0000000..18a8985 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > > @@ -0,0 +1,332 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > + > > +%YAML 1.2 > > +--- > > +$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#"; > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > > + > > +title: Qualcomm QMP PHY controller > > + > > +maintainers: > > + - Manu Gautam <mgautam@xxxxxxxxxxxxxx> > > + > > +description: > > + QMP phy controller supports physical layer functionality for a number of > > + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. > > + > > +properties: > > + compatible: > > + enum: > > + - qcom,ipq8074-qmp-pcie-phy > > + - qcom,msm8996-qmp-pcie-phy > > + - qcom,msm8996-qmp-ufs-phy > > + - qcom,msm8996-qmp-usb3-phy > > + - qcom,msm8998-qmp-pcie-phy > > + - qcom,msm8998-qmp-ufs-phy > > + - qcom,msm8998-qmp-usb3-phy > > + - qcom,sdm845-qhp-pcie-phy > > + - qcom,sdm845-qmp-pcie-phy > > + - qcom,sdm845-qmp-ufs-phy > > + - qcom,sdm845-qmp-usb3-phy > > + - qcom,sdm845-qmp-usb3-uni-phy > > + - qcom,sm8150-qmp-ufs-phy > > + > > + reg: > > + minItems: 1 > > + items: > > + - description: Address and length of PHY's common serdes block. > > + - description: Address and length of the DP_COM control block. > > This DP_COM block is only for one compatible. Is it possible to split > that compatible out of this binding so we can enforce the reg property > being either one or two items? > > In addition, I don't quite understand how this binding is supposed to > work with the DP phy that sits inside qcom,sdm845-qmp-usb3-phy and then > gets muxed out on the USB pins on sdm845 and sc7180 SoCs. Can you fill > me in on how we plan to share the pins between the two phys so that all > the combinations of DP and USB over the type-c pins will work here? My > understanding is that the pins that are controlled by this hardware > block are basically a full USB type-c connector pinout[1] (except that > D+/D- isn't there and the VBUS and CC lines go to the PMIC). Either way, > we get the TX1/2 and RX1/2 pins to use, so we can do 4x lanes of DP or > 2x lanes DP and 2x lanes of USB. There's also a type-c orientation > flipper bit that can flip the DP and USB phy lanes to the correct TX/RX > pins on the SoC. And then the DP phy has a lane remapper to change the > logical DP lane to the physical DP lane. It's a complex piece of > hardware that isn't fully represented by this binding. > > [1] https://en.wikipedia.org/wiki/USB-C#/media/File:USB_Type-C_Receptacle_Pinout.svg Could you please answer Stephen's questions? It would be great to move forward and get support for SC7180 landed. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
