This converts the Synopsis MIPI DSI binding documentation to yaml and should be quite straightforward. I've added a missing ref clk and also added Philippe as maintainer b/c he's the original txt author following the algorithm provided in Message-ID 20200420175909.GA5810@xxxxxxxxxxxx. Cc: Philippe CORNU <philippe.cornu@xxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx Suggested-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Adrian Ratiu <adrian.ratiu@xxxxxxxxxxxxx> --- Changes in v4: - Dropped panel patternProperties (Rob) Changes in v3: - Added ports property and its children which are required (Laurent) - Sorted required list alphabetically Changes in v2: - Removed unnecessary descriptions and maxItems (Rob) - Changed maintainers entry / dropped Mark (Rob) - Added dsi-controller.yaml ref (Rob) --- .../bindings/display/bridge/dw_mipi_dsi.txt | 32 --------- .../display/bridge/snps,dw-mipi-dsi.yaml | 68 +++++++++++++++++++ 2 files changed, 68 insertions(+), 32 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt create mode 100644 Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt deleted file mode 100644 index b13adf30b8d3b..0000000000000 --- a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt +++ /dev/null @@ -1,32 +0,0 @@ -Synopsys DesignWare MIPI DSI host controller -============================================ - -This document defines device tree properties for the Synopsys DesignWare MIPI -DSI host controller. It doesn't constitue a device tree binding specification -by itself but is meant to be referenced by platform-specific device tree -bindings. - -When referenced from platform device tree bindings the properties defined in -this document are defined as follows. The platform device tree bindings are -responsible for defining whether each optional property is used or not. - -- reg: Memory mapped base address and length of the DesignWare MIPI DSI - host controller registers. (mandatory) - -- clocks: References to all the clocks specified in the clock-names property - as specified in [1]. (mandatory) - -- clock-names: - - "pclk" is the peripheral clock for either AHB and APB. (mandatory) - - "px_clk" is the pixel clock for the DPI/RGB input. (optional) - -- resets: References to all the resets specified in the reset-names property - as specified in [2]. (optional) - -- reset-names: string reset name, must be "apb" if used. (optional) - -- panel or bridge node: see [3]. (mandatory) - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/reset/reset.txt -[3] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml new file mode 100644 index 0000000000000..012aa8e7cb8cd --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/snps,dw-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare MIPI DSI host controller + +maintainers: + - Philippe CORNU <philippe.cornu@xxxxxx> + +description: | + This document defines device tree properties for the Synopsys DesignWare MIPI + DSI host controller. It doesn't constitue a device tree binding specification + by itself but is meant to be referenced by platform-specific device tree + bindings. + + When referenced from platform device tree bindings the properties defined in + this document are defined as follows. The platform device tree bindings are + responsible for defining whether each property is required or optional. + +allOf: + - $ref: ../dsi-controller.yaml# + +properties: + reg: + maxItems: 1 + + clocks: + items: + - description: Module clock + - description: DSI bus clock for either AHB and APB + - description: Pixel clock for the DPI/RGB input + minItems: 2 + + clock-names: + items: + - const: ref + - const: pclk + - const: px_clk + minItems: 2 + + resets: + maxItems: 1 + + reset-names: + const: apb + + ports: + type: object + + properties: + port@0: + type: object + description: Input node to receive pixel data. + port@1: + type: object + description: DSI output node to panel. + + required: + - port@0 + - port@1 + +required: + - clock-names + - clocks + - ports + - reg -- 2.26.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
