Convert the Thine THC63LVD1024 text binding to YAML.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
.../display/bridge/thine,thc63lvd1024.txt | 66 ----------
.../display/bridge/thine,thc63lvd1024.yaml | 121 ++++++++++++++++++
2 files changed, 121 insertions(+), 66 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
deleted file mode 100644
index d17d1e5820d7..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Thine Electronics THC63LVD1024 LVDS decoder
--------------------------------------------
-
-The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS streams
-to parallel data outputs. The chip supports single/dual input/output modes,
-handling up to two LVDS input streams and up to two digital CMOS/TTL outputs.
-
-Single or dual operation mode, output data mapping and DDR output modes are
-configured through input signals and the chip does not expose any control bus.
-
-Required properties:
-- compatible: Shall be "thine,thc63lvd1024"
-- vcc-supply: Power supply for TTL output, TTL CLOCKOUT signal, LVDS input,
- PPL and digital circuitry
-
-Optional properties:
-- powerdown-gpios: Power down GPIO signal, pin name "/PDWN". Active low
-- oe-gpios: Output enable GPIO signal, pin name "OE". Active high
-
-The THC63LVD1024 video port connections are modeled according
-to OF graph bindings specified by Documentation/devicetree/bindings/graph.txt
-
-Required video port nodes:
-- port@0: First LVDS input port
-- port@2: First digital CMOS/TTL parallel output
-
-Optional video port nodes:
-- port@1: Second LVDS input port
-- port@3: Second digital CMOS/TTL parallel output
-
-The device can operate in single-link mode or dual-link mode. In single-link
-mode, all pixels are received on port@0, and port@1 shall not contain any
-endpoint. In dual-link mode, even-numbered pixels are received on port@0 and
-odd-numbered pixels on port@1, and both port@0 and port@1 shall contain
-endpoints.
-
-Example:
---------
-
- thc63lvd1024: lvds-decoder {
- compatible = "thine,thc63lvd1024";
-
- vcc-supply = <®_lvds_vcc>;
- powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- lvds_dec_in_0: endpoint {
- remote-endpoint = <&lvds_out>;
- };
- };
-
- port@2{
- reg = <2>;
-
- lvds_dec_out_2: endpoint {
- remote-endpoint = <&adv7511_in>;
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
new file mode 100644
index 000000000000..469ac4a34273
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/thine,thc63lvd1024.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thine Electronics THC63LVD1024 LVDS Decoder
+
+maintainers:
+ - Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
+ - Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
+
+description: |
+ The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS
+ streams to parallel data outputs. The chip supports single/dual input/output
+ modes, handling up to two LVDS input streams and up to two digital CMOS/TTL
+ outputs.
+
+ Single or dual operation mode, output data mapping and DDR output modes are
+ configured through input signals and the chip does not expose any control
+ bus.
+
+properties:
+ compatible:
+ const: thine,thc63lvd1024
+
+ ports:
+ type: object
+ description: |
+ This device has four video ports. Their connections are modeled using the
+ OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+ The device can operate in single-link mode or dual-link mode. In
+ single-link mode, all pixels are received on port@0, and port@1 shall not
+ contain any endpoint. In dual-link mode, even-numbered pixels are
+ received on port@0 and odd-numbered pixels on port@1, and both port@0 and
+ port@1 shall contain endpoints.
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ port@0:
+ type: object
+ description: First LVDS input port
+
+ port@1:
+ type: object
+ description: Second LVDS input port
+
+ port@2:
+ type: object
+ description: First digital CMOS/TTL parallel output
+
+ port@3:
+ type: object
+ description: Second digital CMOS/TTL parallel output
+
+ required:
+ - port@0
+ - port@2
+
+ additionalProperties: false
+
+ oe-gpios:
+ maxItems: 1
+ description: Output enable GPIO signal, pin name "OE", active high.
+
+ powerdown-gpios:
+ maxItems: 1
+ description: Power down GPIO signal, pin name "/PDWN", active low.
+
+ vcc-supply:
+ maxItems: 1
+ description:
+ Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and
+ digital circuitry.
+
+required:
+ - compatible
+ - ports
+ - vcc-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+
+ vcc-supply = <®_lvds_vcc>;
+ powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_dec_in_0: endpoint {
+ remote-endpoint = <&lvds_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ lvds_dec_out_2: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+...
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
