[PATCH] AMDGPU: Correctly initialize thermal controller for GPUs with Powerplay table v0 (e.g Hawaii)

[Sandeep <sandy.8925@xxxxxxxxx>]

This is required for the AMDGPU driver to report fan speed for Hawaii
GPUs (otherwise the fan speed is just reported as 0)
---
 .../drm/amd/powerplay/hwmgr/processpptables.c | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c
b/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c
index 77c14671866c..bb58cfab1033 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c
@@ -984,6 +984,34 @@ static int init_thermal_controller(
  struct pp_hwmgr *hwmgr,
  const ATOM_PPLIB_POWERPLAYTABLE *powerplay_table)
 {
+ hwmgr->thermal_controller.ucType =
+ powerplay_table->sThermalController.ucType;
+ hwmgr->thermal_controller.ucI2cLine =
+ powerplay_table->sThermalController.ucI2cLine;
+ hwmgr->thermal_controller.ucI2cAddress =
+ powerplay_table->sThermalController.ucI2cAddress;
+
+ hwmgr->thermal_controller.fanInfo.bNoFan =
+ (0 != (powerplay_table->sThermalController.ucFanParameters &
+ ATOM_PP_FANPARAMETERS_NOFAN));
+
+ hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution =
+ powerplay_table->sThermalController.ucFanParameters &
+ ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK;
+
+ hwmgr->thermal_controller.fanInfo.ulMinRPM
+ = powerplay_table->sThermalController.ucFanMinRPM * 100UL;
+ hwmgr->thermal_controller.fanInfo.ulMaxRPM
+ = powerplay_table->sThermalController.ucFanMaxRPM * 100UL;
+
+ set_hw_cap(
+ hwmgr,
+ ATOM_PP_THERMALCONTROLLER_NONE != hwmgr->thermal_controller.ucType,
+ PHM_PlatformCaps_ThermalController
+   );
+
+ hwmgr->thermal_controller.use_hw_fan_control = 1;
+
  return 0;
 }

--
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel