[PATCH 0/2] A couple of important fixes for i915 on 5.4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Sultan Alsawaf <sultan@xxxxxxxxxxxxxxx>

Hi,

This patchset contains fixes for two pesky i915 bugs that exist in 5.4.

The first bug, fixed by
"drm/i915/gt: Schedule request retirement when timeline idles" upstream, is very
high power consumption by i915 hardware due to an old commit that broke the RC6
power state for the iGPU on Skylake+. On my laptop, a Dell Precision 5540 with
an i9-9880H, the idle power consumption of my laptop with this commit goes down
from 10 W to 2 W, saving a massive 8 W of power. On other Skylake+ laptops I
tested, this commit reduced idle power consumption by at least a few watts. The
difference in power consumption can be observed by running `powertop` while
disconnected from the charger, or by using the intel-undervolt tool [1] and
running `intel-undervolt measure` which doesn't require being disconnected from
the charger. The psys measurement from intel-undervolt is the one of interest.

Backporting this commit was not trivial due to i915's high rate of churn, but
the backport didn't require changing any code from the original commit; it only
required moving code around and not altering some #includes.

The second bug causes severe graphical corruption and flickering on laptops
which support an esoteric power-saving mechanism called Panel Self Refresh
(PSR). Enabled by default in 5.0, PSR causes graphical corruption to the point
of unusability on many Dell laptops made within the past few years, since they
typically support PSR. A bug was filed with Intel a while ago for this with more
information [2]. I suspect most the community hasn't been affected by this bug
because ThinkPads and many other laptops I checked didn't support PSR. As of
writing, the issues I observed with PSR are fixed in Intel's drm-tip branch, but
i915 suffers from so much churn that backporting the individual PSR fixes is
infeasible (and an Intel engineer attested to this, saying that the PSR fixes in
drm-tip wouldn't be backported [3]). Disabling PSR by default brings us back to
pre-5.0 behavior, and from my tests with functional PSR in the drm-tip kernel,
I didn't observe any reduction in power consumption with PSR enabled, so there
isn't much lost from turning it off. Also, Ubuntu now ships with PSR disabled by
default in its affected kernels, so there is distro support behind this change.

Thanks,
Sultan

[1] https://github.com/kitsunyan/intel-undervolt
[2] https://gitlab.freedesktop.org/drm/intel/issues/425
[3] https://gitlab.freedesktop.org/drm/intel/issues/425#note_416130

Chris Wilson (1):
  drm/i915/gt: Schedule request retirement when timeline idles

Sultan Alsawaf (1):
  drm/i915: Disable Panel Self Refresh (PSR) by default

 drivers/gpu/drm/i915/gt/intel_engine_cs.c     |  2 +
 drivers/gpu/drm/i915/gt/intel_engine_types.h  |  8 ++
 drivers/gpu/drm/i915/gt/intel_lrc.c           |  8 ++
 drivers/gpu/drm/i915/gt/intel_timeline.c      |  1 +
 .../gpu/drm/i915/gt/intel_timeline_types.h    |  3 +
 drivers/gpu/drm/i915/i915_params.c            |  3 +-
 drivers/gpu/drm/i915/i915_params.h            |  2 +-
 drivers/gpu/drm/i915/i915_request.c           | 73 +++++++++++++++++++
 drivers/gpu/drm/i915/i915_request.h           |  4 +
 9 files changed, 101 insertions(+), 3 deletions(-)

-- 
2.26.0

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux