On 13/03/2020 15:17, Laurent Pinchart wrote: > Hi Neil, > > On Fri, Mar 13, 2020 at 03:12:13PM +0100, Neil Armstrong wrote: >> On 13/03/2020 14:40, Laurent Pinchart wrote: >>> On Wed, Mar 11, 2020 at 01:51:33PM +0100, Phong LE wrote: >>>> Add the ITE bridge HDMI it66121 bindings. >>>> >>>> Signed-off-by: Phong LE <ple@xxxxxxxxxxxx> >>>> --- >>>> .../bindings/display/bridge/ite,it66121.yaml | 98 +++++++++++++++++++ >>>> 1 file changed, 98 insertions(+) >>>> create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml >>>> [...] >>>> + >>>> + pclk-dual-edge: >>>> + maxItems: 1 >>>> + description: enable pclk dual edge mode. >>> >>> I'm having a bit of trouble understanding how this operates. Looking at >>> the driver code the property is only taken into account to calculate the >>> maximum allowed frequency. How is the IT66121 configured for single vs. >>> dual pixel clock edge mode ? >> >> Dual edge mode is Dual-Data-Rate mode, the normal mode is MEDIA_BUS_FMT_RGB888_1X24 and dual edge is >> MEDIA_BUS_FMT_RGB888_2X12_LE (or MEDIA_BUS_FMT_RGB888_2X12_BE, not sure) on a single clock period. >> >> This should be negociated at runtime, but the bus width should be specified somewhere to select >> one of the modes. > > How about replacing this property by bus-width to report the connected > bus width ? It should then become an endpoint property. It was my thought. The mediatek dpi also uses this property, which is also very wrong in the same way. Neil [...] _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
