From: Alex Deucher <alexander.deucher@xxxxxxx>
Selecting ATOM_PPLL_INVALID should be equivalent as the
DCPLL or PPLL0 are already programmed for the DISPCLK, but
the preferred method is to always specify the PLL selected.
SetPixelClock will check the parameters and skip the
programming if the PLL is already set up.
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
drivers/gpu/drm/radeon/atombios_crtc.c | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 3904d79..bbbeb98 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1539,7 +1539,11 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc)
* crtc virtual pixel clock.
*/
if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
- if (ASIC_IS_DCE5(rdev) || rdev->clock.dp_extclk)
+ if (ASIC_IS_DCE5(rdev))
+ return ATOM_DCPLL;
+ else if (ASIC_IS_DCE6(rdev))
+ return ATOM_PPLL0;
+ else if (rdev->clock.dp_extclk)
return ATOM_PPLL_INVALID;
}
}
--
1.7.7.5
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
