On Fri, Feb 28, 2020 at 1:57 AM Gerd Hoffmann <kraxel@xxxxxxxxxx> wrote:
>
> On Thu, Feb 27, 2020 at 01:04:54PM -0800, Alistair Francis wrote:
> > The QEMU model for the Bochs display has no VGA memory section at offset
> > 0x400 [1]. By writing to this register Linux can create a write to
> > unassigned memory which depending on machine and architecture can result
> > in a store fault.
> >
> > I don't see any reference to this address at OSDev [2] or in the Bochs
> > source code.
> >
> > Removing this write still allows graphics to work inside QEMU with
> > the bochs-display.
>
> It's not that simple. The driver also handles the qemu stdvga (-device
> VGA, -device secondary-vga) which *does* need the vga port write.
> There is no way for the guest to figure whenever the device is
> secondary-vga or bochs-display.
>
> So how about fixing things on the host side? Does qemu patch below
> help?
That patch looks like it will fix the problem, but it doesn't seem
like the correct fix. I would rather avoid adding a large chunk of
dummy I/O to handle the two devices.
>
> Maybe another possible approach is to enable/disable vga access per
> arch. On x86 this doesn't cause any problems. I guess you are on
> risc-v?
I would prefer this option. I do see this on RISC-V, but I suspect the
issue will appear on other architectures (although how they handle I/O
failures in QEMU is a different story).
Can I just do the VGA write if x86?
Alistair
>
> cheers,
> Gerd
>
> diff --git a/hw/display/bochs-display.c b/hw/display/bochs-display.c
> index 62085f9fc063..e93e838243b8 100644
> --- a/hw/display/bochs-display.c
> +++ b/hw/display/bochs-display.c
> @@ -151,6 +151,26 @@ static const MemoryRegionOps bochs_display_qext_ops = {
> .endianness = DEVICE_LITTLE_ENDIAN,
> };
>
> +static uint64_t dummy_read(void *ptr, hwaddr addr, unsigned size)
> +{
> + return -1;
> +}
> +
> +static void dummy_write(void *ptr, hwaddr addr,
> + uint64_t val, unsigned size)
> +{
> +}
> +
> +static const MemoryRegionOps dummy_ops = {
> + .read = dummy_read,
> + .write = dummy_write,
> + .valid.min_access_size = 1,
> + .valid.max_access_size = 4,
> + .impl.min_access_size = 1,
> + .impl.max_access_size = 1,
> + .endianness = DEVICE_LITTLE_ENDIAN,
> +};
> +
> static int bochs_display_get_mode(BochsDisplayState *s,
> BochsDisplayMode *mode)
> {
> @@ -284,8 +304,8 @@ static void bochs_display_realize(PCIDevice *dev, Error **errp)
> memory_region_init_io(&s->qext, obj, &bochs_display_qext_ops, s,
> "qemu extended regs", PCI_VGA_QEXT_SIZE);
>
> - memory_region_init(&s->mmio, obj, "bochs-display-mmio",
> - PCI_VGA_MMIO_SIZE);
> + memory_region_init_io(&s->mmio, obj, &dummy_ops, NULL,
> + "bochs-display-mmio", PCI_VGA_MMIO_SIZE);
> memory_region_add_subregion(&s->mmio, PCI_VGA_BOCHS_OFFSET, &s->vbe);
> memory_region_add_subregion(&s->mmio, PCI_VGA_QEXT_OFFSET, &s->qext);
>
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
