[PATCH 78/89] drm/vc4: hdmi: Add a set_timings callback

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Similarly to the previous patches, the timings setup in the HDMI controller
of the BCM2711 is slightly different, mostly because it supports higher
resolutions and thus needed more spaces for the various timings, resulting
in the register layout changing.

Let's add a callback for that as well.

Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 71 +++++++++++++++++++----------------
 drivers/gpu/drm/vc4/vc4_hdmi.h |  4 ++-
 2 files changed, 44 insertions(+), 31 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 405019118a20..98198ece8db8 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -371,12 +371,9 @@ static void vc4_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi, bool enable)
 	HDMI_WRITE(HDMI_CSC_CTL, csc_ctl);
 }
 
-static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
+static void vc4_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
+				 struct drm_display_mode *mode)
 {
-	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
-	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
-	struct vc4_hdmi_encoder *vc4_encoder = &vc4_hdmi->encoder;
-	bool debug_dump_regs = false;
 	bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC;
 	bool vsync_pos = mode->flags & DRM_MODE_FLAG_PVSYNC;
 	bool interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE;
@@ -394,6 +391,41 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
 					mode->crtc_vsync_end -
 					interlaced,
 					VC4_HDMI_VERTB_VBP));
+
+	HDMI_WRITE(HDMI_HORZA,
+		   (vsync_pos ? VC4_HDMI_HORZA_VPOS : 0) |
+		   (hsync_pos ? VC4_HDMI_HORZA_HPOS : 0) |
+		   VC4_SET_FIELD(mode->hdisplay * pixel_rep,
+				 VC4_HDMI_HORZA_HAP));
+
+	HDMI_WRITE(HDMI_HORZB,
+		   VC4_SET_FIELD((mode->htotal -
+				  mode->hsync_end) * pixel_rep,
+				 VC4_HDMI_HORZB_HBP) |
+		   VC4_SET_FIELD((mode->hsync_end -
+				  mode->hsync_start) * pixel_rep,
+				 VC4_HDMI_HORZB_HSP) |
+		   VC4_SET_FIELD((mode->hsync_start -
+				  mode->hdisplay) * pixel_rep,
+				 VC4_HDMI_HORZB_HFP));
+
+	HDMI_WRITE(HDMI_VERTA0, verta);
+	HDMI_WRITE(HDMI_VERTA1, verta);
+
+	HDMI_WRITE(HDMI_VERTB0, vertb_even);
+	HDMI_WRITE(HDMI_VERTB1, vertb);
+
+	HDMI_WRITE(HDMI_VID_CTL,
+		 (vsync_pos ? 0 : VC4_HD_VID_CTL_VSYNC_LOW) |
+		 (hsync_pos ? 0 : VC4_HD_VID_CTL_HSYNC_LOW));
+}
+
+static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
+{
+	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
+	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
+	struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
+	bool debug_dump_regs = false;
 	int ret;
 
 	ret = pm_runtime_get_sync(&vc4_hdmi->pdev->dev);
@@ -437,32 +469,8 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
 		   VC4_HDMI_SCHEDULER_CONTROL_MANUAL_FORMAT |
 		   VC4_HDMI_SCHEDULER_CONTROL_IGNORE_VSYNC_PREDICTS);
 
-	HDMI_WRITE(HDMI_HORZA,
-		   (vsync_pos ? VC4_HDMI_HORZA_VPOS : 0) |
-		   (hsync_pos ? VC4_HDMI_HORZA_HPOS : 0) |
-		   VC4_SET_FIELD(mode->hdisplay * pixel_rep,
-				 VC4_HDMI_HORZA_HAP));
-
-	HDMI_WRITE(HDMI_HORZB,
-		   VC4_SET_FIELD((mode->htotal -
-				  mode->hsync_end) * pixel_rep,
-				 VC4_HDMI_HORZB_HBP) |
-		   VC4_SET_FIELD((mode->hsync_end -
-				  mode->hsync_start) * pixel_rep,
-				 VC4_HDMI_HORZB_HSP) |
-		   VC4_SET_FIELD((mode->hsync_start -
-				  mode->hdisplay) * pixel_rep,
-				 VC4_HDMI_HORZB_HFP));
-
-	HDMI_WRITE(HDMI_VERTA0, verta);
-	HDMI_WRITE(HDMI_VERTA1, verta);
-
-	HDMI_WRITE(HDMI_VERTB0, vertb_even);
-	HDMI_WRITE(HDMI_VERTB1, vertb);
-
-	HDMI_WRITE(HDMI_VID_CTL,
-		 (vsync_pos ? 0 : VC4_HD_VID_CTL_VSYNC_LOW) |
-		 (hsync_pos ? 0 : VC4_HD_VID_CTL_HSYNC_LOW));
+	if (vc4_hdmi->variant->set_timings)
+		vc4_hdmi->variant->set_timings(vc4_hdmi, mode);
 
 	if (vc4_encoder->hdmi_monitor &&
 	    drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_LIMITED) {
@@ -1425,6 +1433,7 @@ struct vc4_hdmi_variant bcm2835_variant = {
 	.init_resources		= vc4_hdmi_init_resources,
 	.csc_setup		= vc4_hdmi_csc_setup,
 	.reset			= vc4_hdmi_reset,
+	.set_timings		= vc4_hdmi_set_timings,
 	.phy_init		= vc4_hdmi_phy_init,
 	.phy_disable		= vc4_hdmi_phy_disable,
 	.phy_rng_enable		= vc4_hdmi_phy_rng_enable,
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 22669e07b22e..4a67d62aef53 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -44,6 +44,10 @@ struct vc4_hdmi_variant {
 	/* Callback to enable / disable the CSC */
 	void (*csc_setup)(struct vc4_hdmi *vc4_hdmi, bool enable);
 
+	/* Callback to configure the video timings in the HDMI block */
+	void (*set_timings)(struct vc4_hdmi *vc4_hdmi,
+			    struct drm_display_mode *mode);
+
 	/* Callback to initialize the PHY according to the mode */
 	void (*phy_init)(struct vc4_hdmi *vc4_hdmi,
 			 struct drm_display_mode *mode);
-- 
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux