The raspberrypi_fw_pll_is_on function doesn't only apply to PLL
registered in the driver, but any clock exposed by the firmware.
Since we also implement the is_prepared hook, make the function
consistent with the other function names, and drop the fw from the
function name.
Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
Cc: linux-clk@xxxxxxxxxxxxxxx
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
drivers/clk/bcm/clk-raspberrypi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 3b2da62a72f5..13b7ee148824 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -87,7 +87,7 @@ static int raspberrypi_clock_property(struct rpi_firmware *firmware,
return 0;
}
-static int raspberrypi_fw_pll_is_on(struct clk_hw *hw)
+static int raspberrypi_fw_is_prepared(struct clk_hw *hw)
{
struct raspberrypi_clk_data *data =
container_of(hw, struct raspberrypi_clk_data, hw);
@@ -170,7 +170,7 @@ static int raspberrypi_pll_determine_rate(struct clk_hw *hw,
}
static const struct clk_ops raspberrypi_firmware_pll_clk_ops = {
- .is_prepared = raspberrypi_fw_pll_is_on,
+ .is_prepared = raspberrypi_fw_is_prepared,
.recalc_rate = raspberrypi_fw_pll_get_rate,
.set_rate = raspberrypi_fw_pll_set_rate,
.determine_rate = raspberrypi_pll_determine_rate,
--
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
