The raspberry_clock_property only takes the clock ID as an argument, but
now that we have a clock data structure it makes more sense to just pass
that structure instead.
Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
Cc: linux-clk@xxxxxxxxxxxxxxx
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
drivers/clk/bcm/clk-raspberrypi.c | 29 ++++++++++++++---------------
1 file changed, 14 insertions(+), 15 deletions(-)
diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index e796dabbc641..3b2da62a72f5 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -67,11 +67,12 @@ struct raspberrypi_firmware_prop {
__le32 disable_turbo;
} __packed;
-static int raspberrypi_clock_property(struct rpi_firmware *firmware, u32 tag,
- u32 clk, u32 *val)
+static int raspberrypi_clock_property(struct rpi_firmware *firmware,
+ struct raspberrypi_clk_data *data,
+ u32 tag, u32 *val)
{
struct raspberrypi_firmware_prop msg = {
- .id = cpu_to_le32(clk),
+ .id = cpu_to_le32(data->id),
.val = cpu_to_le32(*val),
.disable_turbo = cpu_to_le32(1),
};
@@ -94,9 +95,8 @@ static int raspberrypi_fw_pll_is_on(struct clk_hw *hw)
u32 val = 0;
int ret;
- ret = raspberrypi_clock_property(rpi->firmware,
- RPI_FIRMWARE_GET_CLOCK_STATE,
- data->id, &val);
+ ret = raspberrypi_clock_property(rpi->firmware, data,
+ RPI_FIRMWARE_GET_CLOCK_STATE, &val);
if (ret)
return 0;
@@ -113,9 +113,8 @@ static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw,
u32 val = 0;
int ret;
- ret = raspberrypi_clock_property(rpi->firmware,
- RPI_FIRMWARE_GET_CLOCK_RATE,
- data->id, &val);
+ ret = raspberrypi_clock_property(rpi->firmware, data,
+ RPI_FIRMWARE_GET_CLOCK_RATE, &val);
if (ret)
return ret;
@@ -131,9 +130,9 @@ static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
int ret;
- ret = raspberrypi_clock_property(rpi->firmware,
+ ret = raspberrypi_clock_property(rpi->firmware, data,
RPI_FIRMWARE_SET_CLOCK_RATE,
- data->id, &new_rate);
+ &new_rate);
if (ret)
dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d",
clk_hw_get_name(hw), ret);
@@ -198,18 +197,18 @@ static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
init.flags = CLK_GET_RATE_NOCACHE | CLK_IGNORE_UNUSED;
/* Get min & max rates set by the firmware */
- ret = raspberrypi_clock_property(rpi->firmware,
+ ret = raspberrypi_clock_property(rpi->firmware, data,
RPI_FIRMWARE_GET_MIN_CLOCK_RATE,
- data->id, &min_rate);
+ &min_rate);
if (ret) {
dev_err(rpi->dev, "Failed to get %s min freq: %d\n",
init.name, ret);
return ret;
}
- ret = raspberrypi_clock_property(rpi->firmware,
+ ret = raspberrypi_clock_property(rpi->firmware, data,
RPI_FIRMWARE_GET_MAX_CLOCK_RATE,
- data->id, &max_rate);
+ &max_rate);
if (ret) {
dev_err(rpi->dev, "Failed to get %s max freq: %d\n",
init.name, ret);
--
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
