> > > In 3.4, radeon worked with a glitch - window titles were see-throug (not > > > drawn). In 3.5-rc5, radeon driver seems to be more careful and disables > > > acceleration on this system at all. Full dmesg below. > > > > Does it always do it the same? got the dmesg from 3.4 and/or 2.6.32? > > That was a good question. I did some more tries, and it was not > repeatable. Sometimes it worked like 3.4 did - rv100 initialized fine, > no borders except when maximized, otherwise worked. Re-tested 3.4.0-rc7 that I had availble from 3.4 times, it worked 4 out of 4 times. > Initial windows border problem seems to have been introduced between > 2.6.37 and 2.6.38, bisect is slow. It's actually more complicated than that. Old kernel images started misbehaving from around 2.6.35-rc5 and any kernel older than that was OK. When I recompiled the older kernels with squeeze gcc (migh have been lenny gcc before, or different answers to make oldconfig), anything from current git down to 2.6.33 is broken with radeon.modeset=1 and works (I get window titles) with radeon.modeset=0. 2.6.32 works and has kernel modesetting enabled from dmesg but I think I did not notice screen going fbcon during boot... maybe it only used the modesetting when X started. So there are 2 different problems (maybe related), the new one above and the old one of not seeing some window borders when modesetting and acceleration are in use. Maximized windows do have borders. -- Meelis Roos (mroos@xxxxxxxx) _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel