* Pavel Machek <pavel@xxxxxx> [200219 20:54]: > Hi! > > > > This patch adds a led-backlight driver (led_bl), which is similar to > > > pwm_bl except the driver uses a LED class driver to adjust the > > > brightness in the HW. Multiple LEDs can be used for a single backlight. > > > > > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx> > > > Signed-off-by: Jean-Jacques Hiblot <jjhiblot@xxxxxx> > > > Acked-by: Pavel Machek <pavel@xxxxxx> > > > Reviewed-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx> > > > Acked-by: Lee Jones <lee.jones@xxxxxxxxxx> > > > Acked-by: Tony Lindgren <tony@xxxxxxxxxxx> > > > Tested-by: Tony Lindgren <tony@xxxxxxxxxxx> > > > Signed-off-by: Pavel Machek <pavel@xxxxxx> > > > --- > > > drivers/video/backlight/Kconfig | 7 ++ > > > drivers/video/backlight/Makefile | 1 + > > > drivers/video/backlight/led_bl.c | 260 +++++++++++++++++++++++++++++++++++++++ > > > 3 files changed, 268 insertions(+) > > > create mode 100644 drivers/video/backlight/led_bl.c > > > > Here's the version of the driver I have. AFAICT > > > default-brightness-level handling is ok, so does not need to be > > > changed. > > > > > > Lee, it would be easiest for me if you could apply it to your tree and > > > push, but given enough time I can push it to Linus, too. > > > > Oh you're using quoted-printable for patches.. Got it applied now, > > and it still works. Below is also the related dts change that > > I tested with. > > > > Feel free to pick the dts change too, naturally that should > > not be applied before the driver. > > > > If you guys instead want me to pick these both into my fixes > > branch, just let me know and I'll do the explaining why these > > are needed as fixes. Basically we no longer have a way to enable > > the LCD backlight for droid4 manually starting with v5.6-rc1 > > unlike earlier. > > If you are willing to do that, it looks like good solution from my > point of view. OK. I'll apply them but won't push out yet in case Lee is already applying the driver change.. Pavel, care to ack the dts patch? Regards, Tony _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
