[Bug 200695] Blank screen on RX 580 with amdgpu.dc=1 enabled (no displays detected)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



https://bugzilla.kernel.org/show_bug.cgi?id=200695

babgozd (babgozdtb@xxxxxxxxxxx) changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |babgozdtb@xxxxxxxxxxx

--- Comment #38 from babgozd (babgozdtb@xxxxxxxxxxx) ---
(In reply to Adam from comment #37)
> As several comments mention different behavior between the different
> connector types I found a spare DVI cable and tried connecting to the same
> monitor via that input and it worked! So once logged in I plugged in the
> HDMI cable and switched input and it worked just fine (monitor was glitchy
> at first but once I disabled DVI output in monitor configuration it worked
> perfectly). To confirm this was indeed working with the DC code path I
> tested audio over HDMI and it worked just fine (and does not work with DC
> disabled, as expected). So I rebooted with both the DVI and HDMI in and the
> output over HDMI worked all through boot. I then disconnected the DVI and
> rebooted and the HDMI continues to work so far. Unfortunately I don't have a
> displayport monitor around to test if that behaves as weirdly. Just to be
> clear, I had tried to make this monitor work for a couple weeks over HDMI
> and the only thing that worked was amdgpu.dc=0 until I plugged in the DVI
> connector so this was not a one off fail.
> 
> I forgot to mention before that when the HDMI output was not working with DC
> my Xorg logs also showed no monitor detected.
> 
> I can attach the two different Xorg logs if that helps?
I am following this thread since it has created. My R9 380 with DVI-I output is
connected to my VGA monitor with DVI-I male to VGA female adapter and I am
getting black/blank screen while booting with amdgpu.dc=1 which is default
since kernel 4.17. It is fine with amdgpu.dc=0. I can provide logs too if any
kernel contributor wants to investigate the problem any further.

-- 
You are receiving this mail because:
You are watching the assignee of the bug.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux