Hi Tomi.
On Mon, Feb 10, 2020 at 10:15:33AM +0200, Tomi Valkeinen wrote:
> Hi Thierry,
>
> On 02/12/2019 15:07, Laurent Pinchart wrote:
> > Hi Tomi,
> >
> > Thank you for the patch.
> >
> > On Thu, Nov 14, 2019 at 11:39:50AM +0200, Tomi Valkeinen wrote:
> > > The panel datasheet says that the panel samples at falling edge, but
> > > does not say anything about h/v sync signals. Testing shows that if the
> > > sync signals are driven on falling edge, the picture on the panel will
> > > be slightly shifted right.
> > >
> > > Setting sync drive edge to the same as data drive edge fixes this issue.
> > >
> > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> >
> > I don't have access to the documentation, but this makes sense, so
> >
> > Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> >
> > > ---
> > > drivers/gpu/drm/panel/panel-simple.c | 3 ++-
> > > 1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> > > index 5d487686d25c..0784536ae6af 100644
> > > --- a/drivers/gpu/drm/panel/panel-simple.c
> > > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > > @@ -2397,7 +2397,8 @@ static const struct panel_desc osddisplays_osd070t1718_19ts = {
> > > .height = 91,
> > > },
> > > .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> > > - .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
> > > + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
> > > + DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE,
> > > .connector_type = DRM_MODE_CONNECTOR_DPI,
> > > };
>
> Can this be merged?
I have lost the original mail.
Can you re-send or provide a patchwork pointer or similar.
Then I will apply.
PS. Mail had been stuck in my spam quarantine so did not get it until
now.
Sam
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
