In order to use GCE function, we need add some information
into display node (mboxes, mediatek,gce-client-reg, mediatek,gce-events).
Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
Signed-off-by: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index be4428c92f35..8b522b039a37 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/power/mt8183-power.h>
+#include <dt-bindings/gce/mt8183-gce.h>
#include "mt8183-pinfunc.h"
/ {
@@ -664,6 +665,9 @@
reg = <0 0x14000000 0 0x1000>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
#clock-cells = <1>;
+ mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+ <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
};
ovl0: ovl@14008000 {
@@ -672,6 +676,7 @@
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_OVL0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
};
ovl_2l0: ovl@14009000 {
@@ -680,6 +685,7 @@
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
};
ovl_2l1: ovl@1400a000 {
@@ -688,6 +694,7 @@
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
};
rdma0: rdma@1400b000 {
@@ -697,6 +704,7 @@
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
mediatek,rdma_fifo_size = <5120>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
};
rdma1: rdma@1400c000 {
@@ -706,6 +714,7 @@
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
mediatek,rdma_fifo_size = <2048>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
};
color0: color@1400e000 {
@@ -715,6 +724,7 @@
interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
};
ccorr0: ccorr@1400f000 {
@@ -723,6 +733,7 @@
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
};
aal0: aal@14010000 {
@@ -732,6 +743,7 @@
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_AAL0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
};
gamma0: gamma@14011000 {
@@ -741,6 +753,7 @@
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
};
dither0: dither@14012000 {
@@ -749,6 +762,7 @@
interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
};
mutex: mutex@14016000 {
@@ -756,6 +770,8 @@
reg = <0 0x14016000 0 0x1000>;
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
+ mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>,
+ <CMDQ_EVENT_MUTEX_STREAM_DONE1>;
};
smi_common: smi@14019000 {
--
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
