If "speed" is zero then we use it as a divisor to find "prescale". It's
better to move the check for zero to the very start of the function.
Fixes: 9eeec26a1339 ("drm/amd/display: Refine i2c frequency calculating sequence")
Signed-off-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
---
drivers/gpu/drm/amd/display/dc/dce/dce_i2c_hw.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_i2c_hw.c b/drivers/gpu/drm/amd/display/dc/dce/dce_i2c_hw.c
index 066188ba7949..24adec407972 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_i2c_hw.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_i2c_hw.c
@@ -267,6 +267,9 @@ static void set_speed(
uint32_t xtal_ref_div = 0;
uint32_t prescale = 0;
+ if (speed == 0)
+ return;
+
REG_GET(MICROSECOND_TIME_BASE_DIV, XTAL_REF_DIV, &xtal_ref_div);
if (xtal_ref_div == 0)
@@ -274,17 +277,15 @@ static void set_speed(
prescale = ((dce_i2c_hw->reference_frequency * 2) / xtal_ref_div) / speed;
- if (speed) {
- if (dce_i2c_hw->masks->DC_I2C_DDC1_START_STOP_TIMING_CNTL)
- REG_UPDATE_N(SPEED, 3,
- FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_PRESCALE), prescale,
- FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_THRESHOLD), 2,
- FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_START_STOP_TIMING_CNTL), speed > 50 ? 2:1);
- else
- REG_UPDATE_N(SPEED, 2,
- FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_PRESCALE), prescale,
- FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_THRESHOLD), 2);
- }
+ if (dce_i2c_hw->masks->DC_I2C_DDC1_START_STOP_TIMING_CNTL)
+ REG_UPDATE_N(SPEED, 3,
+ FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_PRESCALE), prescale,
+ FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_THRESHOLD), 2,
+ FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_START_STOP_TIMING_CNTL), speed > 50 ? 2:1);
+ else
+ REG_UPDATE_N(SPEED, 2,
+ FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_PRESCALE), prescale,
+ FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_THRESHOLD), 2);
}
static bool setup_engine(
--
2.11.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
