Signed-off-by: Kamlesh Gurudasani <kamlesh.gurudasani@xxxxxxxxx>
---
.../devicetree/bindings/display/ilitek,ili9486.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9486.txt
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.txt b/Documentation/devicetree/bindings/display/ilitek,ili9486.txt
new file mode 100644
index 0000000..51c8196
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.txt
@@ -0,0 +1,27 @@
+Ilitek ILI9486 display panels
+
+This binding is for display panels using an Ilitek ILI9486 controller in SPI
+mode.
+
+Required properties:
+- compatible: "ozzmaker,piscreen", "waveshare,rpi-lcd-35", "ilitek,ili9486"
+- dc-gpios: D/C pin
+- reset-gpios: Reset pin
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+ display@0{
+ compatible = "ozzmaker,piscreen", "waveshare,rpi-lcd-35", "ilitek,ili9486";
+ reg = <0>;
+ spi-max-frequency = <32000000>;
+ dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ rotation = <180>;
+ backlight = <&backlight>;
+ };
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
