Re: [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 07, 2020 at 04:32:08PM -0800, Manasi Navare wrote:
> Adaptive Sync is a VESA feature so add a DRM core helper to parse
> the EDID's detailed descritors to obtain the adaptive sync monitor range.
> Store this info as part fo drm_display_info so it can be used
> across all drivers.
> This part of the code is stripped out of amdgpu's function
> amdgpu_dm_update_freesync_caps() to make it generic and be used
> across all DRM drivers
> 
> v2:
> * Change vmin and vmax to use u8 (Ville)
> * Dont store pixel clock since that is just a max dotclock
> and not related to VRR mode (Manasi)
> 
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Harry Wentland <harry.wentland@xxxxxxx>
> Cc: Clinton A Taylor <clinton.a.taylor@xxxxxxxxx>
> Cc: Nicholas Kazlauskas <nicholas.kazluaskas@xxxxxxx>
> Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> ---
>  drivers/gpu/drm/drm_edid.c  | 51 +++++++++++++++++++++++++++++++++++++
>  include/drm/drm_connector.h | 22 ++++++++++++++++
>  include/drm/drm_edid.h      |  2 ++
>  3 files changed, 75 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 99769d6c9f84..52781a0e708b 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -4880,6 +4880,54 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
>  	}
>  }
>  
> +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> +				  const struct edid *edid)
> +{
> +	struct drm_display_info *info = &connector->display_info;
> +	const struct detailed_timing *timing;
> +	const struct detailed_non_pixel *data;
> +	const struct detailed_data_monitor_range *range;

Needlessly wide scope for everything above.

> +	int i;
> +
> +	/*
> +	 * Restrict Adaptive Sync only for dp and edp
> +	 */
> +	if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort &&
> +	    connector->connector_type != DRM_MODE_CONNECTOR_eDP)
> +		return;
> +
> +	if (edid->version <= 1 && !(edid->version == 1 && edid->revision > 1))
> +		return;

if (!version_greater(...))
	return;

> +
> +	for (i = 0; i < 4; i++) {

This should probably use for_each_detailed_block()

> +		timing  = &edid->detailed_timings[i];
> +		data    = &timing->data.other_data;
> +		range   = &data->data.range;
> +		/*
> +		 * Check if monitor has continuous frequency mode
> +		 */
> +		if (data->type != EDID_DETAIL_MONITOR_RANGE)
> +			continue;
> +		/*
> +		 * Check for flag range limits only. If flag == 1 then
> +		 * no additional timing information provided.
> +		 * Default GTF, GTF Secondary curve and CVT are not
> +		 * supported
> +		 */
> +		if (range->flags != 1)
> +			continue;
> +
> +		info->adaptive_sync.min_vfreq = range->min_vfreq;
> +		info->adaptive_sync.max_vfreq = range->max_vfreq;
> +
> +		DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
> +			      info->adaptive_sync.min_vfreq,
> +			      info->adaptive_sync.max_vfreq);
> +		break;
> +	}
> +}
> +EXPORT_SYMBOL(drm_get_adaptive_sync_limits);
> +
>  /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
>   * all of the values which would have been set from EDID
>   */
> @@ -4901,6 +4949,7 @@ drm_reset_display_info(struct drm_connector *connector)
>  	memset(&info->hdmi, 0, sizeof(info->hdmi));
>  
>  	info->non_desktop = 0;
> +	memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
>  }
>  
>  u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
> @@ -4916,6 +4965,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
>  
>  	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
>  
> +	drm_get_adaptive_sync_limits(connector, edid);
> +
>  	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
>  
>  	if (edid->revision < 3)
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 221910948b37..77df404a2e01 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -254,6 +254,23 @@ enum drm_panel_orientation {
>  	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
>  };
>  
> +/**
> + * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
> + * &drm_display_info
> + *
> + * This struct is used to store a Panel's Adaptive Sync capabilities
> + * as parsed from EDID's detailed monitor range descriptor block.
> + *
> + * @min_vfreq: This is the min supported refresh rate in Hz from
> + *             EDID's detailed monitor range.
> + * @max_vfreq: This is the max supported refresh rate in Hz from
> + *             EDID's detailed monitor range
> + */
> +struct drm_adaptive_sync_info {
> +	u8 min_vfreq;
> +	u8 max_vfreq;
> +};
> +
>  /*
>   * This is a consolidated colorimetry list supported by HDMI and
>   * DP protocol standard. The respective connectors will register
> @@ -465,6 +482,11 @@ struct drm_display_info {
>  	 * @non_desktop: Non desktop display (HMD).
>  	 */
>  	bool non_desktop;
> +
> +	/**
> +	 * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
> +	 */
> +	struct drm_adaptive_sync_info adaptive_sync;
>  };
>  
>  int drm_display_info_set_bus_formats(struct drm_display_info *info,
> diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
> index f0b03d401c27..b9a230aa3e69 100644
> --- a/include/drm/drm_edid.h
> +++ b/include/drm/drm_edid.h
> @@ -503,4 +503,6 @@ void drm_edid_get_monitor_name(struct edid *edid, char *name,
>  struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
>  					   int hsize, int vsize, int fresh,
>  					   bool rb);
> +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> +				  const struct edid *edid);
>  #endif /* __DRM_EDID_H__ */
> -- 
> 2.19.1

-- 
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux