Re: [PATCH RFC v1 2/6] drm/sprd: add Unisoc's drm kms master

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Thomas,
Our soc needs to support both cma and iommu, but our iommu is not ready for upload, so i remove it from sprd_gem.c
So can i upload the cma code first? and add iommu support later

On Mon, Jan 6, 2020 at 6:11 PM Thomas Zimmermann <tzimmermann@xxxxxxx> wrote:
Hi Kevin

Am 16.12.19 um 12:40 schrieb Kevin Tang:
> From: Kevin Tang <kevin.tang@xxxxxxxxxx>
>
> Adds drm support for the Unisoc's display subsystem.
>
> This is drm device and gem driver. This driver provides support for the
> Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
>
> Cc: Orson Zhai <orsonzhai@xxxxxxxxx>
> Cc: Baolin Wang <baolin.wang@xxxxxxxxxx>
> Cc: Chunyan Zhang <zhang.lyra@xxxxxxxxx>
> Signed-off-by: Kevin Tang <kevin.tang@xxxxxxxxxx>
> ---
>  drivers/gpu/drm/Kconfig         |   2 +
>  drivers/gpu/drm/Makefile        |   1 +
>  drivers/gpu/drm/sprd/Kconfig    |  14 ++
>  drivers/gpu/drm/sprd/Makefile   |   8 ++
>  drivers/gpu/drm/sprd/sprd_drm.c | 286 ++++++++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/sprd/sprd_drm.h |  16 +++
>  drivers/gpu/drm/sprd/sprd_gem.c | 178 +++++++++++++++++++++++++
>  drivers/gpu/drm/sprd/sprd_gem.h |  30 +++++
>  8 files changed, 535 insertions(+)
>  create mode 100644 drivers/gpu/drm/sprd/Kconfig
>  create mode 100644 drivers/gpu/drm/sprd/Makefile
>  create mode 100644 drivers/gpu/drm/sprd/sprd_drm.c
>  create mode 100644 drivers/gpu/drm/sprd/sprd_drm.h
>  create mode 100644 drivers/gpu/drm/sprd/sprd_gem.c
>  create mode 100644 drivers/gpu/drm/sprd/sprd_gem.h
>
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index bfdadc3..cead12c 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -387,6 +387,8 @@ source "drivers/gpu/drm/aspeed/Kconfig"

>  source "drivers/gpu/drm/mcde/Kconfig"

> +source "drivers/gpu/drm/sprd/Kconfig"
> +
>  # Keep legacy drivers last

>  menuconfig DRM_LEGACY
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 9f1c7c4..85ca211 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -122,3 +122,4 @@ obj-$(CONFIG_DRM_LIMA)  += lima/
>  obj-$(CONFIG_DRM_PANFROST) += panfrost/
>  obj-$(CONFIG_DRM_ASPEED_GFX) += aspeed/
>  obj-$(CONFIG_DRM_MCDE) += mcde/
> +obj-$(CONFIG_DRM_SPRD) += sprd/
> diff --git a/drivers/gpu/drm/sprd/Kconfig b/drivers/gpu/drm/sprd/Kconfig
> new file mode 100644
> index 0000000..79f286b
> --- /dev/null
> +++ b/drivers/gpu/drm/sprd/Kconfig
> @@ -0,0 +1,14 @@
> +config DRM_SPRD
> +     tristate "DRM Support for Unisoc SoCs Platform"
> +     depends on ARCH_SPRD
> +     depends on DRM && OF
> +     select DRM_KMS_HELPER
> +     select DRM_GEM_CMA_HELPER
> +     select DRM_KMS_CMA_HELPER
> +     select DRM_MIPI_DSI
> +     select DRM_PANEL
> +     select VIDEOMODE_HELPERS
> +     select BACKLIGHT_CLASS_DEVICE
> +     help
> +       Choose this option if you have a Unisoc chipsets.
> +       If M is selected the module will be called sprd-drm.
> \ No newline at end of file
> diff --git a/drivers/gpu/drm/sprd/Makefile b/drivers/gpu/drm/sprd/Makefile
> new file mode 100644
> index 0000000..df0b316
> --- /dev/null
> +++ b/drivers/gpu/drm/sprd/Makefile
> @@ -0,0 +1,8 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +ccflags-y += -Iinclude/drm
> +
> +subdir-ccflags-y += -I$(src)
> +
> +obj-y := sprd_drm.o \
> +     sprd_gem.o
> \ No newline at end of file
> diff --git a/drivers/gpu/drm/sprd/sprd_drm.c b/drivers/gpu/drm/sprd/sprd_drm.c
> new file mode 100644
> index 0000000..4aee25fa4
> --- /dev/null
> +++ b/drivers/gpu/drm/sprd/sprd_drm.c
> @@ -0,0 +1,286 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 Unisoc Inc.
> + */
> +
> +#include <linux/component.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of_graph.h>
> +#include <linux/of_platform.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_drv.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_gem_framebuffer_helper.h>
> +#include <drm/drm_probe_helper.h>
> +#include <drm/drm_vblank.h>
> +
> +#include "sprd_drm.h"
> +#include "sprd_gem.h"
> +
> +#define DRIVER_NAME  "sprd"
> +#define DRIVER_DESC  "Spreadtrum SoCs' DRM Driver"
> +#define DRIVER_DATE  "20191101"
> +#define DRIVER_MAJOR 1
> +#define DRIVER_MINOR 0
> +
> +static const struct drm_mode_config_helper_funcs sprd_drm_mode_config_helper = {
> +     .atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
> +};
> +
> +static const struct drm_mode_config_funcs sprd_drm_mode_config_funcs = {
> +     .fb_create = drm_gem_fb_create,
> +     .atomic_check = drm_atomic_helper_check,
> +     .atomic_commit = drm_atomic_helper_commit,
> +};
> +
> +static void sprd_drm_mode_config_init(struct drm_device *drm)
> +{
> +     drm_mode_config_init(drm);
> +
> +     drm->mode_config.min_width = 0;
> +     drm->mode_config.min_height = 0;
> +     drm->mode_config.max_width = 8192;
> +     drm->mode_config.max_height = 8192;
> +     drm->mode_config.allow_fb_modifiers = true;
> +
> +     drm->mode_config.funcs = &sprd_drm_mode_config_funcs;
> +     drm->mode_config.helper_private = &sprd_drm_mode_config_helper;
> +}
> +
> +static const struct file_operations sprd_drm_fops = {
> +     .owner          = THIS_MODULE,
> +     .open           = drm_open,
> +     .release        = drm_release,
> +     .unlocked_ioctl = drm_ioctl,
> +     .compat_ioctl   = drm_compat_ioctl,
> +     .poll           = drm_poll,
> +     .read           = drm_read,
> +     .llseek         = no_llseek,
> +     .mmap           = sprd_gem_mmap,
> +};
> +
> +static struct drm_driver sprd_drm_drv = {
> +     .driver_features        = DRIVER_GEM | DRIVER_ATOMIC,
> +     .fops                   = &sprd_drm_fops,
> +     .gem_vm_ops             = &drm_gem_cma_vm_ops,
> +     .gem_free_object_unlocked       = sprd_gem_free_object,
> +     .dumb_create            = sprd_gem_dumb_create,
> +     .prime_fd_to_handle     = drm_gem_prime_fd_to_handle,
> +     .gem_prime_import       = drm_gem_prime_import,
> +     .gem_prime_import_sg_table = sprd_gem_prime_import_sg_table,
> +
> +     .name                   = DRIVER_NAME,
> +     .desc                   = DRIVER_DESC,
> +     .date                   = DRIVER_DATE,
> +     .major                  = DRIVER_MAJOR,
> +     .minor                  = DRIVER_MINOR,
> +};
> +
> +static int sprd_drm_bind(struct device *dev)
> +{
> +     struct drm_device *drm;
> +     struct sprd_drm *sprd;
> +     int err;
> +
> +     drm = drm_dev_alloc(&sprd_drm_drv, dev);
> +     if (IS_ERR(drm))
> +             return PTR_ERR(drm);
> +
> +     dev_set_drvdata(dev, drm);
> +
> +     sprd = devm_kzalloc(drm->dev, sizeof(*sprd), GFP_KERNEL);
> +     if (!sprd) {
> +             err = -ENOMEM;
> +             goto err_free_drm;
> +     }
> +     drm->dev_private = sprd;
> +
> +     sprd_drm_mode_config_init(drm);
> +
> +     /* bind and init sub drivers */
> +     err = component_bind_all(drm->dev, drm);
> +     if (err) {
> +             DRM_ERROR("failed to bind all component.\n");
> +             goto err_dc_cleanup;
> +     }
> +
> +     /* vblank init */
> +     err = drm_vblank_init(drm, drm->mode_config.num_crtc);
> +     if (err) {
> +             DRM_ERROR("failed to initialize vblank.\n");
> +             goto err_unbind_all;
> +     }
> +     /* with irq_enabled = true, we can use the vblank feature. */
> +     drm->irq_enabled = true;
> +
> +     /* reset all the states of crtc/plane/encoder/connector */
> +     drm_mode_config_reset(drm);
> +
> +     /* init kms poll for handling hpd */
> +     drm_kms_helper_poll_init(drm);
> +
> +     err = drm_dev_register(drm, 0);
> +     if (err < 0)
> +             goto err_kms_helper_poll_fini;
> +
> +     return 0;
> +
> +err_kms_helper_poll_fini:
> +     drm_kms_helper_poll_fini(drm);
> +err_unbind_all:
> +     component_unbind_all(drm->dev, drm);
> +err_dc_cleanup:
> +     drm_mode_config_cleanup(drm);
> +err_free_drm:
> +     drm_dev_put(drm);
> +     return err;
> +}
> +
> +static void sprd_drm_unbind(struct device *dev)
> +{
> +     drm_put_dev(dev_get_drvdata(dev));
> +}
> +
> +static const struct component_master_ops sprd_drm_component_ops = {
> +     .bind = sprd_drm_bind,
> +     .unbind = sprd_drm_unbind,
> +};
> +
> +static int compare_of(struct device *dev, void *data)
> +{
> +     struct device_node *np = data;
> +
> +     DRM_DEBUG("compare %s\n", np->full_name);
> +
> +     return dev->of_node == np;
> +}
> +
> +static int sprd_drm_component_probe(struct device *dev,
> +                        const struct component_master_ops *m_ops)
> +{
> +     struct device_node *ep, *port, *remote;
> +     struct component_match *match = NULL;
> +     int i;
> +
> +     if (!dev->of_node)
> +             return -EINVAL;
> +
> +     /*
> +      * Bind the crtc's ports first, so that drm_of_find_possible_crtcs()
> +      * called from encoder's .bind callbacks works as expected
> +      */
> +     for (i = 0; ; i++) {
> +             port = of_parse_phandle(dev->of_node, "ports", i);
> +             if (!port)
> +                     break;
> +
> +             if (!of_device_is_available(port->parent)) {
> +                     of_node_put(port);
> +                     continue;
> +             }
> +
> +             component_match_add(dev, &match, compare_of, port->parent);
> +             of_node_put(port);
> +     }
> +
> +     if (i == 0) {
> +             dev_err(dev, "missing 'ports' property\n");
> +             return -ENODEV;
> +     }
> +
> +     if (!match) {
> +             dev_err(dev, "no available port\n");
> +             return -ENODEV;
> +     }
> +
> +     /*
> +      * For bound crtcs, bind the encoders attached to their remote endpoint
> +      */
> +     for (i = 0; ; i++) {
> +             port = of_parse_phandle(dev->of_node, "ports", i);
> +             if (!port)
> +                     break;
> +
> +             if (!of_device_is_available(port->parent)) {
> +                     of_node_put(port);
> +                     continue;
> +             }
> +
> +             for_each_child_of_node(port, ep) {
> +                     remote = of_graph_get_remote_port_parent(ep);
> +                     if (!remote || !of_device_is_available(remote)) {
> +                             of_node_put(remote);
> +                             continue;
> +                     } else if (!of_device_is_available(remote->parent)) {
> +                             dev_warn(dev, "parent device of %s is not available\n",
> +                                      remote->full_name);
> +                             of_node_put(remote);
> +                             continue;
> +                     }
> +
> +                     component_match_add(dev, &match, compare_of, remote);
> +                     of_node_put(remote);
> +             }
> +             of_node_put(port);
> +     }
> +
> +     return component_master_add_with_match(dev, m_ops, match);
> +}
> +
> +static int sprd_drm_probe(struct platform_device *pdev)
> +{
> +     int ret;
> +
> +     ret = dma_set_mask_and_coherent(&pdev->dev, ~0);
> +     if (ret) {
> +             DRM_ERROR("dma_set_mask_and_coherent failed (%d)\n", ret);
> +             return ret;
> +     }
> +
> +     return sprd_drm_component_probe(&pdev->dev, &sprd_drm_component_ops);
> +}
> +
> +static int sprd_drm_remove(struct platform_device *pdev)
> +{
> +     component_master_del(&pdev->dev, &sprd_drm_component_ops);
> +     return 0;
> +}
> +
> +static void sprd_drm_shutdown(struct platform_device *pdev)
> +{
> +     struct drm_device *drm = platform_get_drvdata(pdev);
> +
> +     if (!drm) {
> +             DRM_WARN("drm device is not available, no shutdown\n");
> +             return;
> +     }
> +
> +     drm_atomic_helper_shutdown(drm);
> +}
> +
> +static const struct of_device_id sprd_drm_match_table[] = {
> +     { .compatible = "sprd,display-subsystem",},
> +     {},
> +};
> +MODULE_DEVICE_TABLE(of, sprd_drm_match_table);
> +
> +static struct platform_driver sprd_drm_driver = {
> +     .probe = sprd_drm_probe,
> +     .remove = sprd_drm_remove,
> +     .shutdown = sprd_drm_shutdown,
> +     .driver = {
> +             .name = "sprd-drm-drv",
> +             .of_match_table = sprd_drm_match_table,
> +     },
> +};
> +
> +module_platform_driver(sprd_drm_driver);
> +
> +MODULE_AUTHOR("Leon He <leon.he@xxxxxxxxxx>");
> +MODULE_AUTHOR("Kevin Tang <kevin.tang@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Unisoc DRM KMS Master Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/gpu/drm/sprd/sprd_drm.h b/drivers/gpu/drm/sprd/sprd_drm.h
> new file mode 100644
> index 0000000..137cb27
> --- /dev/null
> +++ b/drivers/gpu/drm/sprd/sprd_drm.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2019 Unisoc Inc.
> + */
> +
> +#ifndef _SPRD_DRM_H_
> +#define _SPRD_DRM_H_
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_print.h>
> +
> +struct sprd_drm {
> +     struct drm_device *drm;
> +};
> +
> +#endif /* _SPRD_DRM_H_ */
> diff --git a/drivers/gpu/drm/sprd/sprd_gem.c b/drivers/gpu/drm/sprd/sprd_gem.c
> new file mode 100644
> index 0000000..9aec78e
> --- /dev/null
> +++ b/drivers/gpu/drm/sprd/sprd_gem.c
> @@ -0,0 +1,178 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 Unisoc Inc.
> + */
> +
> +#include <linux/dma-buf.h>
> +#include <linux/pm_runtime.h>
> +
> +#include <drm/drm_prime.h>
> +
> +#include "sprd_drm.h"
> +#include "sprd_gem.h"
> +
> +static struct sprd_gem_obj *sprd_gem_obj_create(struct drm_device *drm,
> +                                             unsigned long size)
> +{
> +     struct sprd_gem_obj *sprd_gem;
> +     int ret;
> +
> +     sprd_gem = kzalloc(sizeof(*sprd_gem), GFP_KERNEL);
> +     if (!sprd_gem)
> +             return ERR_PTR(-ENOMEM);
> +
> +     ret = drm_gem_object_init(drm, &sprd_gem->base, size);
> +     if (ret < 0) {
> +             DRM_ERROR("failed to initialize gem object\n");
> +             goto error;
> +     }
> +
> +     ret = drm_gem_create_mmap_offset(&sprd_gem->base);
> +     if (ret) {
> +             drm_gem_object_release(&sprd_gem->base);
> +             goto error;
> +     }
> +
> +     return sprd_gem;
> +
> +error:
> +     kfree(sprd_gem);
> +     return ERR_PTR(ret);
> +}
> +
> +void sprd_gem_free_object(struct drm_gem_object *obj)
> +{
> +     struct sprd_gem_obj *sprd_gem = to_sprd_gem_obj(obj);
> +
> +     DRM_DEBUG("gem = %p\n", obj);
> +
> +     if (sprd_gem->vaddr)
> +             dma_free_wc(obj->dev->dev, obj->size,
> +                     sprd_gem->vaddr, sprd_gem->dma_addr);
> +     else if (sprd_gem->sgtb)
> +             drm_prime_gem_destroy(obj, sprd_gem->sgtb);
> +
> +     drm_gem_object_release(obj);
> +
> +     kfree(sprd_gem);
> +}
> +
> +int sprd_gem_dumb_create(struct drm_file *file_priv, struct drm_device *drm,
> +                         struct drm_mode_create_dumb *args)
> +{
> +     struct sprd_gem_obj *sprd_gem;
> +     int ret;
> +
> +     args->pitch = DIV_ROUND_UP(args->width * args->bpp, 8);
> +     args->size = round_up(args->pitch * args->height, PAGE_SIZE);
> +
> +     sprd_gem = sprd_gem_obj_create(drm, args->size);
> +     if (IS_ERR(sprd_gem))
> +             return PTR_ERR(sprd_gem);
> +
> +     sprd_gem->vaddr = dma_alloc_wc(drm->dev, args->size,
> +                     &sprd_gem->dma_addr, GFP_KERNEL | __GFP_NOWARN | GFP_DMA);

I might be missing something, but I still don't understand why all this
GEM code is necessary. I quickly compared with the CMA helpers and the
only meaningful difference is the use of the GFP_DMA flag.

Rather than duplicating the CMA code, it's better to change the CMA
helpers to provide a way of setting this flag.

Best regards
Thomas

> +     if (!sprd_gem->vaddr) {
> +             DRM_ERROR("failed to allocate buffer with size %llu\n",
> +                       args->size);
> +             ret = -ENOMEM;
> +             goto error;
> +     }
> +
> +     ret = drm_gem_handle_create(file_priv, &sprd_gem->base, &args->handle);
> +     if (ret)
> +             goto error;
> +
> +     drm_gem_object_put_unlocked(&sprd_gem->base);
> +
> +     return 0;
> +
> +error:
> +     sprd_gem_free_object(&sprd_gem->base);
> +     return ret;
> +}
> +
> +static int sprd_gem_object_mmap(struct drm_gem_object *obj,
> +                                struct vm_area_struct *vma)
> +
> +{
> +     int ret;
> +     struct sprd_gem_obj *sprd_gem = to_sprd_gem_obj(obj);
> +
> +     vma->vm_flags &= ~VM_PFNMAP;
> +     vma->vm_pgoff = 0;
> +
> +     ret = dma_mmap_wc(obj->dev->dev, vma,
> +                                 sprd_gem->vaddr, sprd_gem->dma_addr,
> +                                 vma->vm_end - vma->vm_start);
> +     if (ret)
> +             drm_gem_vm_close(vma);
> +
> +     return ret;
> +}
> +
> +int sprd_gem_mmap(struct file *filp, struct vm_area_struct *vma)
> +{
> +     struct drm_gem_object *obj;
> +     int ret;
> +
> +     ret = drm_gem_mmap(filp, vma);
> +     if (ret)
> +             return ret;
> +
> +     obj = vma->vm_private_data;
> +
> +     return sprd_gem_object_mmap(obj, vma);
> +}
> +
> +int sprd_gem_prime_mmap(struct drm_gem_object *obj,
> +                         struct vm_area_struct *vma)
> +{
> +     int ret;
> +
> +     ret = drm_gem_mmap_obj(obj, obj->size, vma);
> +     if (ret)
> +             return ret;
> +
> +     return sprd_gem_object_mmap(obj, vma);
> +}
> +
> +struct sg_table *sprd_gem_prime_get_sg_table(struct drm_gem_object *obj)
> +{
> +     struct sprd_gem_obj *sprd_gem = to_sprd_gem_obj(obj);
> +     struct sg_table *sgtb;
> +     int ret;
> +
> +     sgtb = kzalloc(sizeof(*sgtb), GFP_KERNEL);
> +     if (!sgtb)
> +             return ERR_PTR(-ENOMEM);
> +
> +     ret = dma_get_sgtable(obj->dev->dev, sgtb, sprd_gem->vaddr,
> +                           sprd_gem->dma_addr, obj->size);
> +     if (ret) {
> +             DRM_ERROR("failed to allocate sg_table, %d\n", ret);
> +             kfree(sgtb);
> +             return ERR_PTR(ret);
> +     }
> +
> +     return sgtb;
> +}
> +
> +struct drm_gem_object *sprd_gem_prime_import_sg_table(struct drm_device *drm,
> +             struct dma_buf_attachment *attach, struct sg_table *sgtb)
> +{
> +     struct sprd_gem_obj *sprd_gem;
> +
> +     sprd_gem = sprd_gem_obj_create(drm, attach->dmabuf->size);
> +     if (IS_ERR(sprd_gem))
> +             return ERR_CAST(sprd_gem);
> +
> +     DRM_DEBUG("gem = %p\n", &sprd_gem->base);
> +
> +     if (sgtb->nents == 1)
> +             sprd_gem->dma_addr = sg_dma_address(sgtb->sgl);
> +
> +     sprd_gem->sgtb = sgtb;
> +
> +     return &sprd_gem->base;
> +}
> diff --git a/drivers/gpu/drm/sprd/sprd_gem.h b/drivers/gpu/drm/sprd/sprd_gem.h
> new file mode 100644
> index 0000000..b6740bd
> --- /dev/null
> +++ b/drivers/gpu/drm/sprd/sprd_gem.h
> @@ -0,0 +1,30 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2019 Unisoc Inc.
> + */
> +
> +#ifndef _SPRD_GEM_H_
> +#define _SPRD_GEM_H_
> +
> +#include <drm/drm_gem.h>
> +
> +struct sprd_gem_obj {
> +     struct drm_gem_object   base;
> +     dma_addr_t              dma_addr;
> +     struct sg_table         *sgtb;
> +     void                    *vaddr;
> +};
> +
> +#define to_sprd_gem_obj(x)   container_of(x, struct sprd_gem_obj, base)
> +
> +void sprd_gem_free_object(struct drm_gem_object *gem);
> +int sprd_gem_dumb_create(struct drm_file *file_priv, struct drm_device *dev,
> +                         struct drm_mode_create_dumb *args);
> +int sprd_gem_mmap(struct file *filp, struct vm_area_struct *vma);
> +int sprd_gem_prime_mmap(struct drm_gem_object *obj,
> +                      struct vm_area_struct *vma);
> +struct sg_table *sprd_gem_prime_get_sg_table(struct drm_gem_object *obj);
> +struct drm_gem_object *sprd_gem_prime_import_sg_table(struct drm_device *dev,
> +             struct dma_buf_attachment *attach, struct sg_table *sgtb);
> +
> +#endif
>

--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux