Hi Dima and Tomasz,
Sorry for the late reply.
On Tuesday 26 June 2012 10:40:44 Tomasz Stanislawski wrote:
> Hi Dima Zavin,
> Thank you for the patch and for a ping remainder :).
>
> You are right. The unmap is missing in __vb2_queue_cancel.
> I will apply your fix into next version of V4L2 support for dmabuf.
>
> Please refer to some comments below.
>
> On 06/20/2012 08:12 AM, Dima Zavin wrote:
> > Tomasz,
> >
> > I've encountered an issue with this patch when userspace does several
> > stream_on/stream_off cycles. When the user tries to qbuf a buffer
> > after doing stream_off, we trigger the "dmabuf already pinned" warning
> > since we didn't unmap the buffer as dqbuf was never called.
> >
> > The below patch adds calls to unmap in queue_cancel, but my feeling is
> > that we probably should be calling detach too (i.e. put_dmabuf).
According to the V4L2 specification, the "VIDIOC_STREAMOFF ioctl, apart of
aborting or finishing any DMA in progress, unlocks any user pointer buffers
locked in physical memory, and it removes all buffers from the incoming and
outgoing queues".
Detaching the buffer is thus not strictly required. At first thought I agreed
with you, as not deatching the buffer might keep resources allocated for much
longer than needed. For instance, an application that stops the stream and
expects to resume it later will usually not free the buffers (with
VIDIOC_REQBUFS(0)) between VIDIOC_STREAMOFF and VIDIOC_STREAMON. Buffer will
thus be referenced for longer than needed.
However, to reuse the same buffer after restarting the stream, the application
will need to keep the dmabuf fds around in order to queue them. Detaching the
buffer will thus bring little benefit in terms of resource usage, as the open
file handles will keep the buffer around anyway. If an application cares about
that and closes all dmabuf fds after stopping the stream, I expect it to free
the buffers as well.
I don't have a very strong opinion about this, if you would rather detach the
buffer at stream-off time I'm fine with that.
> > Thoughts?
> >
> > --Dima
> >
> > Subject: [PATCH] v4l: vb2: unmap dmabufs on STREAM_OFF event
> >
> > Currently, if the user issues a STREAM_OFF request and then
> > tries to re-enqueue buffers, it will trigger a warning in
> > the vb2 allocators as the buffer would still be mapped
> > from before STREAM_OFF was called. The current expectation
> > is that buffers will be unmapped in dqbuf, but that will never
> > be called on the mapped buffers after a STREAM_OFF event.
> >
> > Cc: Sumit Semwal <sumit.semwal@xxxxxx>
> > Cc: Tomasz Stanislawski <t.stanislaws@xxxxxxxxxxx>
> > Signed-off-by: Dima Zavin <dima@xxxxxxxxxxx>
> > ---
> >
> > drivers/media/video/videobuf2-core.c | 22 ++++++++++++++++++++--
> > 1 files changed, 20 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/media/video/videobuf2-core.c
> > b/drivers/media/video/videobuf2-core.c index b431dc6..e2a8f12 100644
> > --- a/drivers/media/video/videobuf2-core.c
> > +++ b/drivers/media/video/videobuf2-core.c
> > @@ -1592,8 +1592,26 @@ static void __vb2_queue_cancel(struct vb2_queue *q)
> >
> > /*
> > * Reinitialize all buffers for next use.
> > */
> >
> > - for (i = 0; i < q->num_buffers; ++i)
> > - q->bufs[i]->state = VB2_BUF_STATE_DEQUEUED;
> > + for (i = 0; i < q->num_buffers; ++i) {
> > + struct vb2_buffer *vb = q->bufs[i];
> > + int plane;
> > +
> > + vb->state = VB2_BUF_STATE_DEQUEUED;
> > +
> > + if (q->memory != V4L2_MEMORY_DMABUF)
> > + continue;
Don't we need to do something similat for USERPTR buffers as well ? They don't
seem to get unpinned (put_userptr) at stream-off time.
If we decide to detach the buffer as well as unmapping it, we could just call
__vb2_buf_put and __vb2_buf_userptr put here. If we don't, the code might
still be simplified by adding an argument to __vb2_buf_dmabuf_put to select
whether to unmap and detach the buffer, or just unmap it.
> > + for (plane = 0; plane < vb->num_planes; ++plane) {
> > + struct vb2_plane *p = &vb->planes[plane];
> > +
> > + if (!p->mem_priv)
> > + continue;
>
> is the check above really needed? No check like this is done in
> vb2_dqbuf.
I think the check comes from __vb2_plane_dmabuf_put. If the buffer is not
queued mem_priv will be NULL. However, that might be redundant with the next
check
> > + if (p->dbuf_mapped) {
>
> If a buffer is queued then it is also mapped, so dbuf_mapped
> should be always be true here (at least in theory).
The buffer might never have been queued.
> > + call_memop(q, unmap_dmabuf, p->mem_priv);
> > + p->dbuf_mapped = 0;
> > + }
> > + }
> > + }
> >
> > }
> >
> > /**
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
