https://bugs.freedesktop.org/show_bug.cgi?id=17902 thor@xxxxxxxxxxxxxxxxx changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |RESOLVED Resolution| |WORKSFORME --- Comment #85 from thor@xxxxxxxxxxxxxxxxx 2012-06-08 09:06:59 PDT --- Now I also got the scaler "pseudo-working" by inspecting which values the vesa BIOS leaves behind in the DVO and just copying these values. By now I can support 640x480, 800x600 and the native resolution, which is here 1024x768. Unfortunately, I do not have the right vesa BIOS data for the latter, and for anything else, so your milage may vary. Also, the scaler support is somehow hacky as the DVO first needs to be turned on by enabling the PLL by poking into the chipset registers (yuck!). It's really a beasty chip. I will submit the patch to the mailing list later this day, here for your records: diff -rup linux-3.4.1-orig/drivers/gpu/drm/i915/dvo.h linux-3.4.1/drivers/gpu/drm/i915/dvo.h --- linux-3.4.1-orig/drivers/gpu/drm/i915/dvo.h 2012-06-01 09:18:44.000000000 +0200 +++ linux-3.4.1/drivers/gpu/drm/i915/dvo.h 2012-06-08 13:15:19.000000000 +0200 @@ -140,5 +140,6 @@ extern struct intel_dvo_dev_ops ch7xxx_o extern struct intel_dvo_dev_ops ivch_ops; extern struct intel_dvo_dev_ops tfp410_ops; extern struct intel_dvo_dev_ops ch7017_ops; +extern struct intel_dvo_dev_ops ns2501_ops; #endif /* _INTEL_DVO_H */ diff -rup linux-3.4.1-orig/drivers/gpu/drm/i915/dvo_ns2501.c linux-3.4.1/drivers/gpu/drm/i915/dvo_ns2501.c --- linux-3.4.1-orig/drivers/gpu/drm/i915/dvo_ns2501.c 2012-06-08 17:59:20.000000000 +0200 +++ linux-3.4.1/drivers/gpu/drm/i915/dvo_ns2501.c 2012-06-08 17:52:21.000000000 +0200 @@ -0,0 +1,544 @@ +/************************************************************************** + +Copyright © 2012 Gilles Dartiguelongue, Thomas Richter + +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sub license, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +The above copyright notice and this permission notice (including the +next paragraph) shall be included in all copies or substantial portions +of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. +IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, +TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +**************************************************************************/ + +#include "dvo.h" +#include "i915_reg.h" +#include "i915_drv.h" + +#define NS2501_VID 0x1305 +#define NS2501_DID 0x6726 + +#define NS2501_VID_LO 0x00 +#define NS2501_VID_HI 0x01 +#define NS2501_DID_LO 0x02 +#define NS2501_DID_HI 0x03 +#define NS2501_REV 0x04 +#define NS2501_RSVD 0x05 +#define NS2501_FREQ_LO 0x06 +#define NS2501_FREQ_HI 0x07 + +#define NS2501_REG8 0x08 +#define NS2501_8_VEN (1<<5) +#define NS2501_8_HEN (1<<4) +#define NS2501_8_DSEL (1<<3) +#define NS2501_8_BPAS (1<<2) +#define NS2501_8_RSVD (1<<1) +#define NS2501_8_PD (1<<0) + +#define NS2501_REG9 0x09 +#define NS2501_9_VLOW (1<<7) +#define NS2501_9_MSEL_MASK (0x7<<4) +#define NS2501_9_TSEL (1<<3) +#define NS2501_9_RSEN (1<<2) +#define NS2501_9_RSVD (1<<1) +#define NS2501_9_MDI (1<<0) + +#define NS2501_REGC 0x0c + +struct ns2501_priv { + //I2CDevRec d; + bool quiet; + int reg_8_shadow; + int reg_8_set; + // Shadow registers for i915 + int dvoc; + int pll_a; + int srcdim; + int fw_blc; +}; + +#define NSPTR(d) ((NS2501Ptr)(d->DriverPrivate.ptr)) + +/* +** Include the PLL launcher prototype +*/ +extern void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe); + +/* +** For reasons unclear to me, the ns2501 at least on the Fujitsu/Siemens +** laptops does not react on the i2c bus unless +** both the PLL is running and the display is configured in its native +** resolution. +** This function forces the DVO on, and stores the registers it touches. +** Afterwards, registers are restored to regular values. +** +** This is pretty much a hack, though it works. +** Without that, ns2501_readb and ns2501_writeb fail +** when switching the resolution. +*/ + +static void enable_dvo(struct intel_dvo_device *dvo) +{ + struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv); + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_gmbus *bus = container_of(adapter, + struct intel_gmbus, + adapter); + struct drm_i915_private *dev_priv = bus->dev_priv; + + DRM_DEBUG_KMS("%s: Trying to re-enable the DVO\n",__FUNCTION__); + + ns->dvoc = I915_READ(DVO_C); + ns->pll_a = I915_READ(_DPLL_A); + ns->srcdim = I915_READ(DVOC_SRCDIM); + ns->fw_blc = I915_READ(FW_BLC); + + I915_WRITE(DVOC, 0x10004084); + I915_WRITE(_DPLL_A,0xd0820000); + I915_WRITE(DVOC_SRCDIM,0x400300); // 1024x768 + I915_WRITE(FW_BLC,0x1080304); + + intel_enable_pll(dev_priv,0); + + I915_WRITE(DVOC, 0x90004084); +} + +/* +** Restore the I915 registers modified by the above +** trigger function. +*/ +static void restore_dvo(struct intel_dvo_device *dvo) +{ + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_gmbus *bus = container_of(adapter, + struct intel_gmbus, + adapter); + struct drm_i915_private *dev_priv = bus->dev_priv; + struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv); + + I915_WRITE(DVOC ,ns->dvoc); + I915_WRITE(_DPLL_A ,ns->pll_a); + I915_WRITE(DVOC_SRCDIM,ns->srcdim); + I915_WRITE(FW_BLC ,ns->fw_blc); +} + +/* +** Read a register from the ns2501. +** Returns true if successful, false otherwise. +** If it returns false, it might be wise to enable the +** DVO with the above function. +*/ +static bool ns2501_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) +{ + struct ns2501_priv *ns = dvo->dev_priv; + struct i2c_adapter *adapter = dvo->i2c_bus; + u8 out_buf[2]; + u8 in_buf[2]; + + struct i2c_msg msgs[] = { + { + .addr = dvo->slave_addr, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = dvo->slave_addr, + .flags = I2C_M_RD, + .len = 1, + .buf = in_buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = 0; + + if (i2c_transfer(adapter, msgs, 2) == 2) { + *ch = in_buf[0]; + return true; + }; + + if (!ns->quiet) { + DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:0x%02x.\n", + addr, adapter->name, dvo->slave_addr); + } + + return false; +} + +/* +** Write a register to the ns2501. +** Returns true if successful, false otherwise. +** If it returns false, it might be wise to enable the +** DVO with the above function. +*/ +static bool ns2501_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) +{ + struct ns2501_priv *ns = dvo->dev_priv; + struct i2c_adapter *adapter = dvo->i2c_bus; + uint8_t out_buf[2]; + + struct i2c_msg msg = { + .addr = dvo->slave_addr, + .flags = 0, + .len = 2, + .buf = out_buf, + }; + + out_buf[0] = addr; + out_buf[1] = ch; + + if (i2c_transfer(adapter, &msg, 1) == 1) { + return true; + } + + if (!ns->quiet) { + DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d\n", + addr, adapter->name, dvo->slave_addr); + } + + return false; +} + +/* National Semiconductor 2501 driver for chip on i2c bus +** scan for the chip on the bus. +** Hope the VBIOS initialized the PLL correctly so we can +** talk to it. If not, it will not be seen and not detected. +** Bummer! +*/ +static bool ns2501_init(struct intel_dvo_device *dvo, + struct i2c_adapter *adapter) +{ + /* this will detect the NS2501 chip on the specified i2c bus */ + struct ns2501_priv *ns; + unsigned char ch; + + ns = kzalloc(sizeof(struct ns2501_priv), GFP_KERNEL); + if (ns == NULL) + return false; + + dvo->i2c_bus = adapter; + dvo->dev_priv = ns; + ns->quiet = true; + + if (!ns2501_readb(dvo, NS2501_VID_LO, &ch)) + goto out; + + if (ch != (NS2501_VID & 0xff)) { + DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n", + ch, adapter->name, dvo->slave_addr); + goto out; + } + + if (!ns2501_readb(dvo, NS2501_DID_LO, &ch)) + goto out; + + if (ch != (NS2501_DID & 0xff)) { + DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n", + ch, adapter->name, dvo->slave_addr); + goto out; + } + ns->quiet = false; + ns->reg_8_set = 0; + ns->reg_8_shadow = NS2501_8_PD | NS2501_8_BPAS | NS2501_8_VEN | NS2501_8_HEN; + + DRM_DEBUG_KMS("init ns2501 dvo controller successfully!\n"); + return true; + + out: + kfree(ns); + return false; +} + +static enum drm_connector_status ns2501_detect(struct intel_dvo_device *dvo) +{ + /* + ** This is a Laptop display, it doesn't have hotplugging. + ** Even if not, the detection bit of the 2501 is unreliable as + ** it only works for some display types. + ** It is even more unreliable as the PLL must be active for + ** allowing reading from the chiop. + */ + return connector_status_connected; +} + +static enum drm_mode_status ns2501_mode_valid(struct intel_dvo_device *dvo, + struct drm_display_mode *mode) +{ + DRM_DEBUG_KMS("%s: is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n",__FUNCTION__, + mode->hdisplay,mode->htotal,mode->vdisplay,mode->vtotal); + + + /* + ** Currently, these are all the modes I have data from. + ** More might exist. Unclear how to find the native resolution + ** of the panel in here so we could always accept it + ** by disabling the scaler. + */ + if ((mode->hdisplay == 800 && mode->vdisplay == 600) || + (mode->hdisplay == 640 && mode->vdisplay == 480) || + (mode->hdisplay == 1024 && mode->vdisplay == 768)) { + return MODE_OK; + } else { + return MODE_ONE_SIZE; /* Is this a reasonable error? */ + } +} + +static void ns2501_mode_set(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv); + + DRM_DEBUG_KMS("%s: set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n",__FUNCTION__, + mode->hdisplay,mode->htotal,mode->vdisplay,mode->vtotal); + + /* + ** Where do I find the native resolution for which scaling is not required??? + ** + ** First trigger the DVO on as otherwise the chip does not appear on the i2c + ** bus. + */ + enable_dvo(dvo); + + if (mode->hdisplay == 800 && mode->vdisplay == 600) { + /* mode 277 */ + ns->reg_8_shadow &= ~NS2501_8_BPAS; + DRM_DEBUG_KMS("%s: switching to 800x600\n",__FUNCTION__); + + /* + ** No, I do not know where this data comes from. + ** It is just what the video bios left in the DVO, so + ** I'm just copying it here over. + ** This also means that I cannot support any other modes + ** except the ones supported by the bios. + */ + ns2501_writeb(dvo, 0x11, 0xc8); + ns2501_writeb(dvo, 0x1b, 0x19); + ns2501_writeb(dvo, 0x1c, 0x64); + ns2501_writeb(dvo, 0x1d, 0x02); + + ns2501_writeb(dvo, 0x34, 0x03); + ns2501_writeb(dvo, 0x35, 0xff); + + ns2501_writeb(dvo, 0x80, 0x27); + ns2501_writeb(dvo, 0x81, 0x03); + ns2501_writeb(dvo, 0x82, 0x41); + ns2501_writeb(dvo, 0x83, 0x05); + + ns2501_writeb(dvo, 0x8d, 0x02); + ns2501_writeb(dvo, 0x8e, 0x04); + ns2501_writeb(dvo, 0x8f, 0x00); + + ns2501_writeb(dvo, 0x90, 0xff); /* vertical */ + ns2501_writeb(dvo, 0x91, 0x07); + ns2501_writeb(dvo, 0x94, 0x00); + ns2501_writeb(dvo, 0x95, 0x00); + + ns2501_writeb(dvo, 0x96, 0x00); + + ns2501_writeb(dvo, 0x99, 0x00); + ns2501_writeb(dvo, 0x9a, 0x88); + + ns2501_writeb(dvo, 0x9c, 0x23); + ns2501_writeb(dvo, 0x9d, 0x00); + ns2501_writeb(dvo, 0x9e, 0x25); + ns2501_writeb(dvo, 0x9f, 0x03); + + ns2501_writeb(dvo, 0xa4, 0x80); + + ns2501_writeb(dvo, 0xb6, 0x00); + + ns2501_writeb(dvo, 0xb9, 0xc8); /* horizontal? */ + ns2501_writeb(dvo, 0xba, 0x00); /* horizontal? */ + + ns2501_writeb(dvo, 0xc0, 0x05); /* horizontal? */ + ns2501_writeb(dvo, 0xc1, 0xd7); + + ns2501_writeb(dvo, 0xc2, 0x00); + ns2501_writeb(dvo, 0xc3, 0xf8); + + ns2501_writeb(dvo, 0xc4, 0x03); + ns2501_writeb(dvo, 0xc5, 0x1a); + + ns2501_writeb(dvo, 0xc6, 0x00); + ns2501_writeb(dvo, 0xc7, 0x73); + ns2501_writeb(dvo, 0xc8, 0x02); + + } else if (mode->hdisplay == 640 && mode->vdisplay == 480) { + /* mode 274 */ + DRM_DEBUG_KMS("%s: switching to 640x480\n",__FUNCTION__); + /* + ** No, I do not know where this data comes from. + ** It is just what the video bios left in the DVO, so + ** I'm just copying it here over. + ** This also means that I cannot support any other modes + ** except the ones supported by the bios. + */ + ns->reg_8_shadow &= ~NS2501_8_BPAS; + + ns2501_writeb(dvo, 0x11, 0xa0); + ns2501_writeb(dvo, 0x1b, 0x11); + ns2501_writeb(dvo, 0x1c, 0x54); + ns2501_writeb(dvo, 0x1d, 0x03); + + ns2501_writeb(dvo, 0x34, 0x03); + ns2501_writeb(dvo, 0x35, 0xff); + + ns2501_writeb(dvo, 0x80, 0xff); + ns2501_writeb(dvo, 0x81, 0x07); + ns2501_writeb(dvo, 0x82, 0x3d); + ns2501_writeb(dvo, 0x83, 0x05); + + ns2501_writeb(dvo, 0x8d, 0x02); + ns2501_writeb(dvo, 0x8e, 0x10); + ns2501_writeb(dvo, 0x8f, 0x00); + + ns2501_writeb(dvo, 0x90, 0xff); /* vertical */ + ns2501_writeb(dvo, 0x91, 0x07); + ns2501_writeb(dvo, 0x94, 0x00); + ns2501_writeb(dvo, 0x95, 0x00); + + ns2501_writeb(dvo, 0x96, 0x05); + + ns2501_writeb(dvo, 0x99, 0x00); + ns2501_writeb(dvo, 0x9a, 0x88); + + ns2501_writeb(dvo, 0x9c, 0x24); + ns2501_writeb(dvo, 0x9d, 0x00); + ns2501_writeb(dvo, 0x9e, 0x25); + ns2501_writeb(dvo, 0x9f, 0x03); + + ns2501_writeb(dvo, 0xa4, 0x84); + + ns2501_writeb(dvo, 0xb6, 0x09); + + ns2501_writeb(dvo, 0xb9, 0xa0); /* horizontal? */ + ns2501_writeb(dvo, 0xba, 0x00); /* horizontal? */ + + ns2501_writeb(dvo, 0xc0, 0x05); /* horizontal? */ + ns2501_writeb(dvo, 0xc1, 0x90); + + ns2501_writeb(dvo, 0xc2, 0x00); + ns2501_writeb(dvo, 0xc3, 0x0f); + + ns2501_writeb(dvo, 0xc4, 0x03); + ns2501_writeb(dvo, 0xc5, 0x16); + + ns2501_writeb(dvo, 0xc6, 0x00); + ns2501_writeb(dvo, 0xc7, 0x02); + ns2501_writeb(dvo, 0xc8, 0x02); + + } else if (mode->hdisplay == 1024 && mode->vdisplay == 768) { + /* mode 280 */ + DRM_DEBUG_KMS("%s: switching to 1024x768\n",__FUNCTION__); + /* + ** This might or might not work, actually. I'm silently + ** assuming here that the native panel resolution is + ** 1024x768. If not, then this leaves the scaler disabled + ** generating a picture that is likely not the expected. + ** + ** Problem is that I do not know where to take the panel + ** dimensions from. + ** + ** Enable the bypass, scaling not required. + ** + ** The scaler registers are irrelevant here.... + ** + */ + ns->reg_8_shadow |= NS2501_8_BPAS; + ns2501_writeb(dvo, 0x37, 0x44); + } else { + /* Data not known. Bummer! + ** Hopefully, the code should not go here + ** as mode_OK delivered no other modes. + */ + ns->reg_8_shadow |= NS2501_8_BPAS; + } + ns2501_writeb(dvo, NS2501_REG8, ns->reg_8_shadow); + + /* + ** Restore the old i915 registers before + ** forcing the ns2501 on. + */ + restore_dvo(dvo); +} + +/* set the NS2501 power state */ +static void ns2501_dpms(struct intel_dvo_device *dvo, int mode) +{ + struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv); + unsigned char ch; + + DRM_DEBUG_KMS("%s: Trying set the dpms of the DVO to %d\n",__FUNCTION__,mode); + + ch = ns->reg_8_shadow; + + if (mode == DRM_MODE_DPMS_ON) + ch |= NS2501_8_PD; + else + ch &= ~NS2501_8_PD; + + if (ns->reg_8_set == 0 || ns->reg_8_shadow != ch) { + ns->reg_8_set = 1; + ns->reg_8_shadow = ch; + ns2501_writeb(dvo, NS2501_REG8, ch); + } + /* + ** Note that this may actually fail,namely exactly + ** when the chip vanished from the bus. + ** + ** Should I force-enable it here?? + */ +} + +static void ns2501_dump_regs(struct intel_dvo_device *dvo) +{ + uint8_t val; + + ns2501_readb(dvo, NS2501_FREQ_LO, &val); + DRM_LOG_KMS("NS2501_FREQ_LO: 0x%02x\n", val); + ns2501_readb(dvo, NS2501_FREQ_HI, &val); + DRM_LOG_KMS("NS2501_FREQ_HI: 0x%02x\n", val); + ns2501_readb(dvo, NS2501_REG8, &val); + DRM_LOG_KMS("NS2501_REG8: 0x%02x\n", val); + ns2501_readb(dvo, NS2501_REG9, &val); + DRM_LOG_KMS("NS2501_REG9: 0x%02x\n", val); + ns2501_readb(dvo, NS2501_REGC, &val); + DRM_LOG_KMS("NS2501_REGC: 0x%02x\n", val); +} + +static void ns2501_destroy(struct intel_dvo_device *dvo) +{ + struct ns2501_priv *ns = dvo->dev_priv; + + if (ns) { + kfree(ns); + dvo->dev_priv = NULL; + } +} + +struct intel_dvo_dev_ops ns2501_ops = { + .init = ns2501_init, + .detect = ns2501_detect, + .mode_valid = ns2501_mode_valid, + .mode_set = ns2501_mode_set, + .dpms = ns2501_dpms, + .dump_regs = ns2501_dump_regs, + .destroy = ns2501_destroy, +}; diff -rup linux-3.4.1-orig/drivers/gpu/drm/i915/intel_display.c linux-3.4.1/drivers/gpu/drm/i915/intel_display.c --- linux-3.4.1-orig/drivers/gpu/drm/i915/intel_display.c 2012-06-01 09:18:44.000000000 +0200 +++ linux-3.4.1/drivers/gpu/drm/i915/intel_display.c 2012-06-08 16:55:20.000000000 +0200 @@ -1142,7 +1142,7 @@ static void assert_pch_ports_disabled(st * * Note! This is for pre-ILK only. */ -static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) +void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) { int reg; u32 val; diff -rup linux-3.4.1-orig/drivers/gpu/drm/i915/intel_dvo.c linux-3.4.1/drivers/gpu/drm/i915/intel_dvo.c --- linux-3.4.1-orig/drivers/gpu/drm/i915/intel_dvo.c 2012-06-01 09:18:44.000000000 +0200 +++ linux-3.4.1/drivers/gpu/drm/i915/intel_dvo.c 2012-06-08 12:50:16.000000000 +0200 @@ -37,6 +37,7 @@ #define SIL164_ADDR 0x38 #define CH7xxx_ADDR 0x76 #define TFP410_ADDR 0x38 +#define NS2501_ADDR 0x38 static const struct intel_dvo_device intel_dvo_devices[] = { { @@ -61,6 +62,13 @@ static const struct intel_dvo_device int .dev_ops = &ivch_ops, }, { + .type = INTEL_DVO_CHIP_TMDS, + .name = "ns2501", + .dvo_reg = DVOC, + .slave_addr = NS2501_ADDR, + .dev_ops = &ns2501_ops, + }, + { .type = INTEL_DVO_CHIP_TMDS, .name = "tfp410", .dvo_reg = DVOC, diff -rup linux-3.4.1-orig/drivers/gpu/drm/i915/Makefile linux-3.4.1/drivers/gpu/drm/i915/Makefile --- linux-3.4.1-orig/drivers/gpu/drm/i915/Makefile 2012-06-01 09:18:44.000000000 +0200 +++ linux-3.4.1/drivers/gpu/drm/i915/Makefile 2012-06-08 12:50:54.000000000 +0200 @@ -34,7 +34,8 @@ i915-y := i915_drv.o i915_dma.o i915_irq dvo_ch7017.o \ dvo_ivch.o \ dvo_tfp410.o \ - dvo_sil164.o + dvo_sil164.o \ + dvo_ns2501.o i915-$(CONFIG_COMPAT) += i915_ioc32.o -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
