Add display hw catalog changes for SC7180 target. Changes in v1: 1) Configure register offsets and capabilities for the display hw blocks. This patch has dependency on the below series https://patchwork.kernel.org/patch/11243111/ Signed-off-by: Kalyan Thota <kalyan_t@xxxxxxxxxxxxxx> Signed-off-by: Shubhashree Dhar <dhar@xxxxxxxxxxxxxx> Signed-off-by: Raviteja Tamatam <travitej@xxxxxxxxxxxxxx> --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 189 +++++++++++++++++++++++-- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 4 + drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c | 2 +- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + drivers/gpu/drm/msm/msm_drv.c | 4 +- 5 files changed, 187 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index 357e15b..1d2ea93 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -11,11 +11,17 @@ #include "dpu_hw_catalog_format.h" #include "dpu_kms.h" -#define VIG_SDM845_MASK \ - (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_SCALER_QSEED3) | BIT(DPU_SSPP_QOS) |\ +#define VIG_MASK \ + (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) |\ BIT(DPU_SSPP_CSC_10BIT) | BIT(DPU_SSPP_CDP) | BIT(DPU_SSPP_QOS_8LVL) |\ BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_EXCL_RECT)) +#define VIG_SDM845_MASK \ + (VIG_MASK | BIT(DPU_SSPP_SCALER_QSEED3)) + +#define VIG_SC7180_MASK \ + (VIG_MASK | BIT(DPU_SSPP_SCALER_QSEED4)) + #define DMA_SDM845_MASK \ (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\ BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\ @@ -27,6 +33,9 @@ #define MIXER_SDM845_MASK \ (BIT(DPU_MIXER_SOURCESPLIT) | BIT(DPU_DIM_LAYER)) +#define MIXER_SC7180_MASK \ + (BIT(DPU_DIM_LAYER)) + #define PINGPONG_SDM845_MASK BIT(DPU_PINGPONG_DITHER) #define PINGPONG_SDM845_SPLIT_MASK \ @@ -60,6 +69,16 @@ .has_idle_pc = true, }; +static const struct dpu_caps sc7180_dpu_caps = { + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, + .max_mixer_blendstages = 0x9, + .qseed_type = DPU_SSPP_SCALER_QSEED4, + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, + .ubwc_version = DPU_HW_UBWC_VER_20, + .has_dim_layer = true, + .has_idle_pc = true, +}; + static struct dpu_mdp_cfg sdm845_mdp[] = { { .name = "top_0", .id = MDP_TOP, @@ -85,6 +104,23 @@ }, }; +static struct dpu_mdp_cfg sc7180_mdp[] = { + { + .name = "top_0", .id = MDP_TOP, + .base = 0x0, .len = 0x494, + .features = 0, + .highest_bank_bit = 0x3, + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { + .reg_off = 0x2AC, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { + .reg_off = 0x2AC, .bit_off = 8}, + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { + .reg_off = 0x2B4, .bit_off = 8}, + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { + .reg_off = 0x2BC, .bit_off = 8}, + }, +}; + /************************************************************* * CTL sub blocks config *************************************************************/ @@ -116,6 +152,24 @@ }, }; +static struct dpu_ctl_cfg sc7180_ctl[] = { + { + .name = "ctl_0", .id = CTL_0, + .base = 0x1000, .len = 0xE4, + .features = BIT(DPU_CTL_ACTIVE_CFG) + }, + { + .name = "ctl_1", .id = CTL_1, + .base = 0x1200, .len = 0xE4, + .features = BIT(DPU_CTL_ACTIVE_CFG) + }, + { + .name = "ctl_2", .id = CTL_2, + .base = 0x1400, .len = 0xE4, + .features = BIT(DPU_CTL_ACTIVE_CFG) + }, +}; + /************************************************************* * SSPP sub blocks config *************************************************************/ @@ -203,9 +257,23 @@ sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1), }; +static struct dpu_sspp_cfg sc7180_sspp[] = { + SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK, + sdm845_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0), + SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK, + sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0), + SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK, + sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1), + SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_CURSOR_SDM845_MASK, + sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0), +}; + /************************************************************* * MIXER sub blocks config *************************************************************/ + +/* SDM845 */ + static const struct dpu_lm_sub_blks sdm845_lm_sblk = { .maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH, .maxblendstages = 11, /* excluding base layer */ @@ -215,23 +283,46 @@ }, }; -#define LM_BLK(_name, _id, _base, _pp, _lmpair) \ +#define LM_BLK(_name, _id, _base, _fmask, _sblk, _pp, _lmpair) \ { \ .name = _name, .id = _id, \ .base = _base, .len = 0x320, \ - .features = MIXER_SDM845_MASK, \ - .sblk = &sdm845_lm_sblk, \ + .features = _fmask, \ + .sblk = _sblk, \ .pingpong = _pp, \ .lm_pair_mask = (1 << _lmpair) \ } static struct dpu_lm_cfg sdm845_lm[] = { - LM_BLK("lm_0", LM_0, 0x44000, PINGPONG_0, LM_1), - LM_BLK("lm_1", LM_1, 0x45000, PINGPONG_1, LM_0), - LM_BLK("lm_2", LM_2, 0x46000, PINGPONG_2, LM_5), - LM_BLK("lm_3", LM_3, 0x0, PINGPONG_MAX, 0), - LM_BLK("lm_4", LM_4, 0x0, PINGPONG_MAX, 0), - LM_BLK("lm_5", LM_5, 0x49000, PINGPONG_3, LM_2), + LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK, + &sdm845_lm_sblk, PINGPONG_0, LM_1), + LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK, + &sdm845_lm_sblk, PINGPONG_1, LM_0), + LM_BLK("lm_2", LM_2, 0x46000, MIXER_SDM845_MASK, + &sdm845_lm_sblk, PINGPONG_2, LM_5), + LM_BLK("lm_3", LM_3, 0x0, MIXER_SDM845_MASK, + &sdm845_lm_sblk, PINGPONG_MAX, 0), + LM_BLK("lm_4", LM_4, 0x0, MIXER_SDM845_MASK, + &sdm845_lm_sblk, PINGPONG_MAX, 0), + LM_BLK("lm_5", LM_5, 0x49000, MIXER_SDM845_MASK, + &sdm845_lm_sblk, PINGPONG_3, LM_2), +}; + +/* SC7180 */ + +static const struct dpu_lm_sub_blks sc7180_lm_sblk = { + .maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH, + .maxblendstages = 7, /* excluding base layer */ + .blendstage_base = { /* offsets relative to mixer base */ + 0x20, 0x38, 0x50, 0x68, 0x80, 0x98, 0xb0 + }, +}; + +static struct dpu_lm_cfg sc7180_lm[] = { + LM_BLK("lm_0", LM_0, 0x44000, MIXER_SC7180_MASK, + &sc7180_lm_sblk, PINGPONG_0, LM_1), + LM_BLK("lm_1", LM_1, 0x45000, MIXER_SC7180_MASK, + &sc7180_lm_sblk, PINGPONG_1, LM_0), }; /************************************************************* @@ -271,6 +362,11 @@ PP_BLK("pingpong_3", PINGPONG_3, 0x71800), }; +static struct dpu_pingpong_cfg sc7180_pp[] = { + PP_BLK_TE("pingpong_0", PINGPONG_0, 0x70000), + PP_BLK_TE("pingpong_1", PINGPONG_1, 0x70800), +}; + /************************************************************* * INTF sub blocks config *************************************************************/ @@ -290,6 +386,11 @@ INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1), }; +static struct dpu_intf_cfg sc7180_intf[] = { + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0), + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0), +}; + /************************************************************* * VBIF sub blocks config *************************************************************/ @@ -340,6 +441,10 @@ {.fl = 0, .lut = 0x11222222223357} }; +static struct dpu_qos_lut_entry sc7180_qos_linear[] = { + {.fl = 0, .lut = 0x0011222222335777}, +}; + static struct dpu_qos_lut_entry sdm845_qos_macrotile[] = { {.fl = 10, .lut = 0x344556677}, {.fl = 11, .lut = 0x3344556677}, @@ -349,10 +454,18 @@ {.fl = 0, .lut = 0x112233344556677}, }; +static struct dpu_qos_lut_entry sc7180_qos_macrotile[] = { + {.fl = 0, .lut = 0x0011223344556677}, +}; + static struct dpu_qos_lut_entry sdm845_qos_nrt[] = { {.fl = 0, .lut = 0x0}, }; +static struct dpu_qos_lut_entry sc7180_qos_nrt[] = { + {.fl = 0, .lut = 0x0}, +}; + static struct dpu_perf_cfg sdm845_perf_data = { .max_bw_low = 6800000, .max_bw_high = 6800000, @@ -392,6 +505,30 @@ }, }; +static struct dpu_perf_cfg sc7180_perf_data = { + .max_bw_low = 3900000, + .max_bw_high = 5500000, + .min_core_ib = 2400000, + .min_llcc_ib = 800000, + .min_dram_ib = 800000, + .danger_lut_tbl = {0xff, 0xffff, 0x0}, + .qos_lut_tbl = { + {.nentry = ARRAY_SIZE(sc7180_qos_linear), + .entries = sc7180_qos_linear + }, + {.nentry = ARRAY_SIZE(sc7180_qos_macrotile), + .entries = sc7180_qos_macrotile + }, + {.nentry = ARRAY_SIZE(sc7180_qos_nrt), + .entries = sc7180_qos_nrt + }, + }, + .cdp_cfg = { + {.rd_enable = 1, .wr_enable = 1}, + {.rd_enable = 1, .wr_enable = 0} + }, +}; + /************************************************************* * Hardware catalog init *************************************************************/ @@ -425,9 +562,39 @@ static void sdm845_cfg_init(struct dpu_mdss_cfg *dpu_cfg) }; } +/* + * sc7180_cfg_init(): populate sc7180 dpu sub-blocks reg offsets + * and instance counts. + */ +static void sc7180_cfg_init(struct dpu_mdss_cfg *dpu_cfg) +{ + *dpu_cfg = (struct dpu_mdss_cfg){ + .caps = &sc7180_dpu_caps, + .mdp_count = ARRAY_SIZE(sc7180_mdp), + .mdp = sc7180_mdp, + .ctl_count = ARRAY_SIZE(sc7180_ctl), + .ctl = sc7180_ctl, + .sspp_count = ARRAY_SIZE(sc7180_sspp), + .sspp = sc7180_sspp, + .mixer_count = ARRAY_SIZE(sc7180_lm), + .mixer = sc7180_lm, + .pingpong_count = ARRAY_SIZE(sc7180_pp), + .pingpong = sc7180_pp, + .intf_count = ARRAY_SIZE(sc7180_intf), + .intf = sc7180_intf, + .vbif_count = ARRAY_SIZE(sdm845_vbif), + .vbif = sdm845_vbif, + .reg_dma_count = 1, + .dma_cfg = sdm845_regdma, + .perf = sc7180_perf_data, + .mdss_irqs[0] = 0x3f, + }; +} + static struct dpu_mdss_hw_cfg_handler cfg_handler[] = { { .hw_rev = DPU_HW_VER_400, .cfg_init = sdm845_cfg_init}, { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init}, + { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init}, }; void dpu_hw_catalog_deinit(struct dpu_mdss_cfg *dpu_cfg) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index def8a3f..e7e731b 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -38,6 +38,7 @@ #define DPU_HW_VER_401 DPU_HW_VER(4, 0, 1) /* sdm845 v2.0 */ #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */ #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sdm855 v1.0 */ +#define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */ #define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170) @@ -45,6 +46,7 @@ #define IS_SDM845_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_400) #define IS_SDM670_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_410) #define IS_SDM855_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_500) +#define IS_SC7180_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_620) #define DPU_HW_BLK_NAME_LEN 16 @@ -110,6 +112,7 @@ enum { DPU_SSPP_SRC = 0x1, DPU_SSPP_SCALER_QSEED2, DPU_SSPP_SCALER_QSEED3, + DPU_SSPP_SCALER_QSEED4, DPU_SSPP_SCALER_RGB, DPU_SSPP_CSC, DPU_SSPP_CSC_10BIT, @@ -166,6 +169,7 @@ enum { */ enum { DPU_CTL_SPLIT_DISPLAY = 0x1, + DPU_CTL_ACTIVE_CFG, DPU_CTL_MAX }; diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c index 5bc39ba..d0cb1d8 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c @@ -152,7 +152,7 @@ static void _setup_mixer_ops(struct dpu_mdss_cfg *m, unsigned long features) { ops->setup_mixer_out = dpu_hw_lm_setup_out; - if (IS_SDM845_TARGET(m->hwversion) || IS_SDM670_TARGET(m->hwversion)) + if (IS_SDM845_TARGET(m->hwversion) || IS_SDM670_TARGET(m->hwversion) || IS_SC7180_TARGET(m->hwversion)) ops->setup_blend_config = dpu_hw_lm_setup_blend_config_sdm845; else ops->setup_blend_config = dpu_hw_lm_setup_blend_config; diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 58b0485..ee93ba3 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -1111,6 +1111,7 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev) static const struct of_device_id dpu_dt_match[] = { { .compatible = "qcom,sdm845-dpu", }, + { .compatible = "qcom,sc7180-dpu", }, {} }; MODULE_DEVICE_TABLE(of, dpu_dt_match); diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index c84f0a8..f50fefb 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -1192,7 +1192,8 @@ static int add_display_components(struct device *dev, * the interfaces to our components list. */ if (of_device_is_compatible(dev->of_node, "qcom,mdss") || - of_device_is_compatible(dev->of_node, "qcom,sdm845-mdss")) { + of_device_is_compatible(dev->of_node, "qcom,sdm845-mdss") || + of_device_is_compatible(dev->of_node, "qcom,sc7180-mdss")) { ret = of_platform_populate(dev->of_node, NULL, NULL, dev); if (ret) { DRM_DEV_ERROR(dev, "failed to populate children devices\n"); @@ -1317,6 +1318,7 @@ static int msm_pdev_remove(struct platform_device *pdev) { .compatible = "qcom,mdp4", .data = (void *)KMS_MDP4 }, { .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 }, { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, + { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, {} }; MODULE_DEVICE_TABLE(of, dt_match); -- 1.9.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
