During phy compliance auto test mode source need to read
requested test pattern from sink through DPCD. After processing
the request source need to set the pattern. So set/get method
added in drm layer as it is DP protocol.
v1: As per review feedback from Manasi on RFC version,
- added dp revision as function argument in set_phy_pattern api.
- used int for link_rate and u8 for lane_count to align with existing code.
Signed-off-by: Animesh Manna <animesh.manna@xxxxxxxxx>
---
drivers/gpu/drm/drm_dp_helper.c | 93 +++++++++++++++++++++++++++++++++
include/drm/drm_dp_helper.h | 33 +++++++++++-
2 files changed, 125 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index 2c7870aef469..91c80973aa83 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -1371,3 +1371,96 @@ int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_S
return num_bpc;
}
EXPORT_SYMBOL(drm_dp_dsc_sink_supported_input_bpcs);
+
+/**
+ * drm_dp_get_phy_test_pattern() - get the requested pattern from the sink.
+ * @aux: DisplayPort AUX channel
+ * @data: DP phy compliance test parameters.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
+ struct drm_dp_phy_test_params *data)
+{
+ int err;
+ u8 rate, lanes;
+
+ err = drm_dp_dpcd_readb(aux, DP_TEST_LINK_RATE, &rate);
+ if (err < 0)
+ return err;
+ data->link_rate = drm_dp_bw_code_to_link_rate(rate);
+
+ err = drm_dp_dpcd_readb(aux, DP_TEST_LANE_COUNT, &lanes);
+ if (err < 0)
+ return err;
+ data->num_lanes = lanes & DP_MAX_LANE_COUNT_MASK;
+
+ if (lanes & DP_ENHANCED_FRAME_CAP)
+ data->enahanced_frame_cap = true;
+
+ err = drm_dp_dpcd_readb(aux, DP_PHY_TEST_PATTERN, &data->phy_pattern);
+ if (err < 0)
+ return err;
+
+ switch (data->phy_pattern) {
+ case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
+ err = drm_dp_dpcd_read(aux, DP_TEST_80BIT_CUSTOM_PATTERN_7_0,
+ &data->custom80, 10);
+ if (err < 0)
+ return err;
+
+ break;
+ case DP_PHY_TEST_PATTERN_CP2520:
+ err = drm_dp_dpcd_read(aux, DP_TEST_HBR2_SCRAMBLER_RESET,
+ &data->hbr2_reset, 2);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_dp_get_phy_test_pattern);
+
+/**
+ * drm_dp_set_phy_test_pattern() - set the pattern to the sink.
+ * @aux: DisplayPort AUX channel
+ * @data: DP phy compliance test parameters.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
+ struct drm_dp_phy_test_params *data, u8 dp_rev)
+{
+ int err, i;
+ u8 link_config[2];
+ u8 test_pattern;
+
+ link_config[0] = drm_dp_link_rate_to_bw_code(data->link_rate);
+ link_config[1] = data->num_lanes;
+ if (data->enahanced_frame_cap)
+ link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+ err = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, link_config, 2);
+ if (err < 0)
+ return err;
+
+ test_pattern = data->phy_pattern;
+ if (dp_rev < 0x12) {
+ test_pattern = (test_pattern << 2) &
+ DP_LINK_QUAL_PATTERN_11_MASK;
+ err = drm_dp_dpcd_writeb(aux, DP_TRAINING_PATTERN_SET,
+ test_pattern);
+ if (err < 0)
+ return err;
+ } else {
+ for (i = 0; i < data->num_lanes; i++) {
+ err = drm_dp_dpcd_writeb(aux,
+ DP_LINK_QUAL_LANE0_SET + i,
+ test_pattern);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_dp_set_phy_test_pattern);
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 51ecb5112ef8..a64267d197d0 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -699,7 +699,16 @@
# define DP_TEST_CRC_SUPPORTED (1 << 5)
# define DP_TEST_COUNT_MASK 0xf
-#define DP_TEST_PHY_PATTERN 0x248
+#define DP_PHY_TEST_PATTERN 0x248
+# define DP_PHY_TEST_PATTERN_SEL_MASK 0x7
+# define DP_PHY_TEST_PATTERN_NONE 0x0
+# define DP_PHY_TEST_PATTERN_D10_2 0x1
+# define DP_PHY_TEST_PATTERN_ERROR_COUNT 0x2
+# define DP_PHY_TEST_PATTERN_PRBS7 0x3
+# define DP_PHY_TEST_PATTERN_80BIT_CUSTOM 0x4
+# define DP_PHY_TEST_PATTERN_CP2520 0x5
+
+#define DP_TEST_HBR2_SCRAMBLER_RESET 0x24A
#define DP_TEST_80BIT_CUSTOM_PATTERN_7_0 0x250
#define DP_TEST_80BIT_CUSTOM_PATTERN_15_8 0x251
#define DP_TEST_80BIT_CUSTOM_PATTERN_23_16 0x252
@@ -1568,4 +1577,26 @@ static inline void drm_dp_cec_unset_edid(struct drm_dp_aux *aux)
#endif
+/**
+ * struct drm_dp_phy_test_params - DP Phy Compliance parameters
+ * @link: Link information.
+ * @phy_pattern: DP Phy test pattern from DPCD 0x248 (sink)
+ * @hb2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD
+ * 0x24A and 0x24B (sink)
+ * @custom80: DP Test_80BIT_CUSTOM_PATTERN from DPCDs 0x250
+ * through 0x259.
+ */
+struct drm_dp_phy_test_params {
+ int link_rate;
+ u8 num_lanes;
+ u8 phy_pattern;
+ u8 hbr2_reset[2];
+ u8 custom80[10];
+ bool enahanced_frame_cap;
+};
+
+int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
+ struct drm_dp_phy_test_params *data);
+int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
+ struct drm_dp_phy_test_params *data, u8 dp_rev);
#endif /* _DRM_DP_HELPER_H_ */
--
2.22.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
