From: Derek Basehore <dbasehore@xxxxxxxxxxxx>
Not every platform needs quirk detection for panel orientation, so
split the drm_connector_init_panel_orientation_property into two
functions. One for platforms without the need for quirks, and the
other for platforms that need quirks.
Hans de Goede (changes in v2):
Rename the function from drm_connector_init_panel_orientation_property
to drm_connector_set_panel_orientation[_with_quirk] and pass in the
panel-orientation to set.
Beside the rename, also make the function set the passed in value
only once, if the value was set before (to a value other then
DRM_MODE_PANEL_ORIENTATION_UNKNOWN) make any further set calls a no-op.
This change is preparation for allowing the user to override the
panel-orientation for any connector from the kernel commandline.
When the panel-orientation is overridden this way, then we must ignore
the panel-orientation detection done by the driver.
Signed-off-by: Derek Basehore <dbasehore@xxxxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/gpu/drm/drm_connector.c | 74 ++++++++++++++++++-------
drivers/gpu/drm/i915/display/icl_dsi.c | 5 +-
drivers/gpu/drm/i915/display/intel_dp.c | 9 ++-
drivers/gpu/drm/i915/display/vlv_dsi.c | 5 +-
include/drm/drm_connector.h | 9 ++-
5 files changed, 71 insertions(+), 31 deletions(-)
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 4c766624b20d..40a985c411a6 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1114,7 +1114,8 @@ static const struct drm_prop_enum_list hdmi_colorspaces[] = {
* coordinates, so if userspace rotates the picture to adjust for
* the orientation it must also apply the same transformation to the
* touchscreen input coordinates. This property is initialized by calling
- * drm_connector_init_panel_orientation_property().
+ * drm_connector_set_panel_orientation() or
+ * drm_connector_set_panel_orientation_with_quirk()
*
* scaling mode:
* This property defines how a non-native mode is upscaled to the native
@@ -1986,38 +1987,41 @@ void drm_connector_set_vrr_capable_property(
EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
/**
- * drm_connector_init_panel_orientation_property -
- * initialize the connecters panel_orientation property
- * @connector: connector for which to init the panel-orientation property.
- * @width: width in pixels of the panel, used for panel quirk detection
- * @height: height in pixels of the panel, used for panel quirk detection
+ * drm_connector_set_panel_orientation - sets the connecter's panel_orientation
+ * @connector: connector for which to set the panel-orientation property.
+ * @panel_orientation: drm_panel_orientation value to set
+ *
+ * This function sets the connector's panel_orientation and attaches
+ * a "panel orientation" property to the connector.
*
- * This function should only be called for built-in panels, after setting
- * connector->display_info.panel_orientation first (if known).
+ * Calling this function on a connector where the panel_orientation has
+ * already been set is a no-op (e.g. the orientation has been overridden with
+ * a kernel commandline option).
*
- * This function will check for platform specific (e.g. DMI based) quirks
- * overriding display_info.panel_orientation first, then if panel_orientation
- * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
- * "panel orientation" property to the connector.
+ * It is allowed to call this function with a panel_orientation of
+ * DRM_MODE_PANEL_ORIENTATION_UNKNOWN, in which case it is a no-op.
*
* Returns:
* Zero on success, negative errno on failure.
*/
-int drm_connector_init_panel_orientation_property(
- struct drm_connector *connector, int width, int height)
+int drm_connector_set_panel_orientation(
+ struct drm_connector *connector,
+ enum drm_panel_orientation panel_orientation)
{
struct drm_device *dev = connector->dev;
struct drm_display_info *info = &connector->display_info;
struct drm_property *prop;
- int orientation_quirk;
- orientation_quirk = drm_get_panel_orientation_quirk(width, height);
- if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
- info->panel_orientation = orientation_quirk;
+ /* Already set? */
+ if (info->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+ return 0;
- if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+ /* Don't attach the property if the orientation is unknown */
+ if (panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
return 0;
+ info->panel_orientation = panel_orientation;
+
prop = dev->mode_config.panel_orientation_property;
if (!prop) {
prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
@@ -2034,7 +2038,37 @@ int drm_connector_init_panel_orientation_property(
info->panel_orientation);
return 0;
}
-EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+EXPORT_SYMBOL(drm_connector_set_panel_orientation);
+
+/**
+ * drm_connector_set_panel_orientation_with_quirk -
+ * set the connecter's panel_orientation after checking for quirks
+ * @connector: connector for which to init the panel-orientation property.
+ * @panel_orientation: drm_panel_orientation value to set
+ * @width: width in pixels of the panel, used for panel quirk detection
+ * @height: height in pixels of the panel, used for panel quirk detection
+ *
+ * Like drm_connector_set_panel_orientation(), but with a check for platform
+ * specific (e.g. DMI based) quirks overriding the passed in panel_orientation.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_set_panel_orientation_with_quirk(
+ struct drm_connector *connector,
+ enum drm_panel_orientation panel_orientation,
+ int width, int height)
+{
+ int orientation_quirk;
+
+ orientation_quirk = drm_get_panel_orientation_quirk(width, height);
+ if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+ panel_orientation = orientation_quirk;
+
+ return drm_connector_set_panel_orientation(connector,
+ panel_orientation);
+}
+EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
int drm_connector_set_obj_prop(struct drm_mode_object *obj,
struct drm_property *property,
diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 6e398c33a524..8cd51cf67d02 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1536,9 +1536,8 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
- connector->base.display_info.panel_orientation =
- intel_dsi_get_panel_orientation(connector);
- drm_connector_init_panel_orientation_property(&connector->base,
+ drm_connector_set_panel_orientation_with_quirk(&connector->base,
+ intel_dsi_get_panel_orientation(connector),
connector->panel.fixed_mode->hdisplay,
connector->panel.fixed_mode->vdisplay);
}
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 9b15ac4f2fb6..7be7a55f8772 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -7091,9 +7091,12 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
intel_connector->panel.backlight.power = intel_edp_backlight_power;
intel_panel_setup_backlight(connector, pipe);
- if (fixed_mode)
- drm_connector_init_panel_orientation_property(
- connector, fixed_mode->hdisplay, fixed_mode->vdisplay);
+ if (fixed_mode) {
+ /* We do not know the orientation, but their might be a quirk */
+ drm_connector_set_panel_orientation_with_quirk(connector,
+ DRM_MODE_PANEL_ORIENTATION_UNKNOWN,
+ fixed_mode->hdisplay, fixed_mode->vdisplay);
+ }
return true;
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index a71b22bdd95b..fbb9b942ed90 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -1632,10 +1632,9 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
- connector->base.display_info.panel_orientation =
- vlv_dsi_get_panel_orientation(connector);
- drm_connector_init_panel_orientation_property(
+ drm_connector_set_panel_orientation_with_quirk(
&connector->base,
+ vlv_dsi_get_panel_orientation(connector),
connector->panel.fixed_mode->hdisplay,
connector->panel.fixed_mode->vdisplay);
}
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 3fbcf7d3fcaf..f7f02f58f5a7 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1547,8 +1547,13 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
uint64_t link_status);
void drm_connector_set_vrr_capable_property(
struct drm_connector *connector, bool capable);
-int drm_connector_init_panel_orientation_property(
- struct drm_connector *connector, int width, int height);
+int drm_connector_set_panel_orientation(
+ struct drm_connector *connector,
+ enum drm_panel_orientation panel_orientation);
+int drm_connector_set_panel_orientation_with_quirk(
+ struct drm_connector *connector,
+ enum drm_panel_orientation panel_orientation,
+ int width, int height);
int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
int min, int max);
--
2.23.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
