On Thu, Nov 7, 2019 at 5:06 AM H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> wrote:
>
> The Imagination PVR/SGX GPU is part of several SoC from
> multiple vendors, e.g. TI OMAP, Ingenic JZ4780, Intel Poulsbo
> and others.
>
> With this binding, we describe how the SGX processor is
> interfaced to the SoC (registers, interrupt etc.).
>
> Clock, Reset and power management should be handled
> by a parent node or elsewhere.
That's probably TI specific...
> ---
>
> I have used the doc2yaml script to get a first veryion
> but I am still stuggling with the yaml thing. My impression
> is that while it is human readable, it is not very human
> writable... Unfortunately I haven't found a good tutorial
> for Dummies (like me) for bindings in YAML.
Did you read .../bindings/example-schema.yaml? It explains the common
cases and what schema are doing. I recently added to it, so look at
the version in linux-next.
> The big problem is not the YAML syntax but what the schema
> should contain and how to correctly formulate ideas in this
> new language.
>
> Specific questions for this RFC:
>
> * formatting: is space/tab indentation correct?
YAML requires spaces.
> * are strings with "" correct or without?
Generally only keys or values starting with '#' need quotes. There's
other cases, but we simply don't hit them with DT. We tend to quote
$ref values, but that's not strictly needed.
> * how do I specify that there is a list of compatible strings required in a specific order?
An 'items' list defines the order.
> * but there are multiple such lists, and only one of them is to be chosen?
^^^^^^
'oneOf' is the schema keyword you are looking for.
> * how can be described in the binding that there should be certain values in
> the parent node (ranges) to make it work?
You can't. Schemas match on a node and work down from there. So you
can do it, but it's more complicated. You'd need a custom 'select'
select that matches on the parent node having the child node you are
looking for (assuming the parent is something generic like
'simple-bus' which you can't match on). However, based on the example,
I'd say checking 'ranges' is outside the scope of schema checks.
'ranges' doesn't have to be a certain value any more than every case
of 'reg' (except maybe i2c devices with fixed addresses). It's up to
the .dts author how exactly to do address translation.
I would like to have more ranges/reg checks such as bounds checks and
overlapping addresses, but I think we'd do those with code, not
schema.
> I was not able to run
>
> make dt_binding_check dtbs_check
>
> due to some missing dependencies (which I did not want to
> invest time to research them) on my build host, so I could
> not get automated help from those.
Dependencies are documented in Documentation/devicetree/writing-schema.rst.
> ---
> .../devicetree/bindings/gpu/img,pvrsgx.yaml | 128 ++++++++++++++++++
> 1 file changed, 128 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpu/img,pvrsgx.yaml
>
> diff --git a/Documentation/devicetree/bindings/gpu/img,pvrsgx.yaml b/Documentation/devicetree/bindings/gpu/img,pvrsgx.yaml
> new file mode 100644
> index 000000000000..b1b021601c47
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpu/img,pvrsgx.yaml
> @@ -0,0 +1,128 @@
> +# SPDX-License-Identifier: None
Obviously not valid.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/bindings/gpu/img,pvrsgx.yaml#
This should have been correct with the script, but you need to drop 'bindings'.
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Imagination PVR/SGX GPU
> +
> +maintainers:
> + - H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
> +description: |+
> + This binding describes the Imagination SGX5 series of 3D accelerators which
> + are found in several different SoC like TI OMAP, Sitara, Ingenic JZ4780,
> + Allwinner A83, and Intel Poulsbo and CedarView.
> +
> + Only the Imagination SGX530, SGX540 and SGX544 GPUs are currently covered by
> + this binding.
> +
> + The SGX node is usually a child node of some DT node belonging to the SoC
> + which handles clocks, reset and general address space mapping of the SGX
> + register area.
> +
> +properties:
> + compatible:
> + oneOf:
> + - item:
'item/items'
> + # BeagleBoard ABC, OpenPandora 600MHz
> + - const: "ti,omap3-sgx530-121", "img,sgx530-121", "img,sgx530", "img,sgx5"
Not valid YAML nor json-schema. Each value needs to be list item with 'const:'
Plenty of examples in bindings/arm/ with board/soc bindings.
> + # BeagleBoard XM, GTA04, OpenPandora 1GHz
> + - const: "ti,omap3-sgx530-125", "img,sgx530-125", "img,sgx530", "img,sgx5"
This needs to be a new 'items' list under 'oneOf'.
> + # BeagleBone Black
> + - const: "ti,am335x-sgx530-125", "img,sgx530-125", "img,sgx530", "img,sgx5"
> + # Pandaboard (ES)
> + - const: "ti,omap4-sgx540-120", "img,sgx540-120", "img,sgx540", "img,sgx5"
> + - const "ti,omap4-sgx544-112", "img,sgx544-112", "img,sgx544", "img,sgx5"
> + # OMAP5 UEVM, Pyra Handheld
> + "ti,omap5-sgx544-116", "img,sgx544-116", "img,sgx544", "img,sgx5"
> + "ti,dra7-sgx544-116", "img,sgx544-116", "img,sgx544", "img,sgx5"
Just gave up on trying to write a schema here?
> + # CI20
> + "ingenic,jz4780-sgx540-120", "img,sgx540-120", "img,sgx540", "img,sgx5";
> +
> + reg:
> + items:
> + - description: physical base address and length of the register area
For single entries, just 'maxItems: 1' is enough. Unless you have
something special about this device, you don't need a description
here.
> +
> + interrupts:
> + items:
> + - description: interrupt from SGX subsystem to core processor
> +
> + clocks:
> + items:
> + - description: optional clocks
> +
> + required:
> + - compatible
> + - reg
> + - interrupts
> +
> +examples: |
> + gpu@fe00 {
> + compatible = "ti,omap-omap5-sgx544-116", "img,sgx544-116", "img,sgx544", "img,sgx5";
> + reg = <0xfe00 0x200>;
> + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> +
> +historical: |
This should be dropped. It's just for reference as you write the schema.
> + Imagination PVR/SGX GPU
> +
> + Only the Imagination SGX530, SGX540 and SGX544 GPUs are currently covered by this binding.
> +
> + Required properties:
> + - compatible: Should be one of
> + "ti,omap3-sgx530-121", "img,sgx530-121", "img,sgx530", "img,sgx5"; - BeagleBoard ABC, OpenPandora 600MHz
> + "ti,omap3-sgx530-125", "img,sgx530-125", "img,sgx530", "img,sgx5"; - BeagleBoard XM, GTA04, OpenPandora 1GHz
> + "ti,am3517-sgx530-125", "img,sgx530-125", "img,sgx530", "img,sgx5";
> + "ti,am335x-sgx530-125", "img,sgx530-125", "img,sgx530", "img,sgx5"; - BeagleBone Black
> + "ti,omap4-sgx540-120", "img,sgx540-120", "img,sgx540", "img,sgx5"; - Pandaboard (ES)
> + "ti,omap4-sgx544-112", "img,sgx544-112", "img,sgx544", "img,sgx5";
> + "ti,omap5-sgx544-116", "img,sgx544-116", "img,sgx544", "img,sgx5"; - OMAP5 UEVM, Pyra Handheld
> + "ti,dra7-sgx544-116", "img,sgx544-116", "img,sgx544", "img,sgx5";
> + "ti,am3517-sgx530-?", "img,sgx530-?", "img,sgx530", "img,sgx5";
> + "ti,am43xx-sgx530-?", "img,sgx530-?", "img,sgx530", "img,sgx5";
> + "ti,ti81xx-sgx530-?", "img,sgx530-?", "img,sgx530", "img,sgx5";
> + "img,jz4780-sgx540-?", "img,sgx540-?", "img,sgx540", "img,sgx5"; - CI20
> + "allwinner,sun8i-a83t-sgx544-?", "img,sgx544-116", "img,sgx544", "img,sgx5"; - Banana-Pi-M3 (Allwinner A83T)
> + "intel,poulsbo-gma500-sgx535", "img,sgx535-116", "img,sgx535", "img,sgx5"; - Atom Z5xx
> + "intel,medfield-gma-sgx540", "img,sgx540-116", "img,sgx540", "img,sgx5"; - Atom Z24xx
> + "intel,cedarview-gma3600-sgx545", "img,sgx545-116", "img,sgx545", "img,sgx5"; - Atom N2600, D2500
> +
> + The "ti,omap..." entries are needed temporarily to handle SoC
> + specific builds of the kernel module.
> +
> + In the long run, only the "img,sgx..." entry should suffice
> + to match a generic driver for all architectures and driver
> + code can dynamically find out on which SoC it is running.
> +
> +
> + - reg: Physical base address and length of the register area.
> + - interrupts: The interrupt numbers.
> +
> + / {
> + ocp {
> + sgx_module: target-module@56000000 {
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + reg = <0x5600fe00 0x4>,
> + <0x5600fe10 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-midle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>;
> + clocks = <&gpu_clkctrl OMAP5_GPU_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x56000000 0x2000000>;
> +
> + gpu@fe00 {
> + compatible = "ti,omap-omap5-sgx544-116", "img,sgx544-116", "img,sgx544", "img,sgx5";
> + reg = <0xfe00 0x200>;
> + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> + };
> + };
> --
> 2.23.0
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
