From: Thierry Reding <treding@xxxxxxxxxx>
The ->load() and ->unload() drivers are midlayers and should be avoided
in modern drivers. Fix this by moving the code into the driver ->probe()
and ->remove() implementations, respectively.
v2: kick out conflicting framebuffers before initializing fbdev
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
Michał, Dmitry,
do you guys have a way of testing that the removal of the conflicting
framebuffer actually works?
Thierry
drivers/gpu/drm/tegra/drm.c | 389 +++++++++++++++++-------------------
1 file changed, 188 insertions(+), 201 deletions(-)
diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c
index 3012f13bab97..ed2ae898726c 100644
--- a/drivers/gpu/drm/tegra/drm.c
+++ b/drivers/gpu/drm/tegra/drm.c
@@ -82,202 +82,6 @@ tegra_drm_mode_config_helpers = {
.atomic_commit_tail = tegra_atomic_commit_tail,
};
-static int tegra_drm_load(struct drm_device *drm, unsigned long flags)
-{
- struct host1x_device *device = to_host1x_device(drm->dev);
- struct iommu_domain *domain;
- struct tegra_drm *tegra;
- int err;
-
- tegra = kzalloc(sizeof(*tegra), GFP_KERNEL);
- if (!tegra)
- return -ENOMEM;
-
- /*
- * If the Tegra DRM clients are backed by an IOMMU, push buffers are
- * likely to be allocated beyond the 32-bit boundary if sufficient
- * system memory is available. This is problematic on earlier Tegra
- * generations where host1x supports a maximum of 32 address bits in
- * the GATHER opcode. In this case, unless host1x is behind an IOMMU
- * as well it won't be able to process buffers allocated beyond the
- * 32-bit boundary.
- *
- * The DMA API will use bounce buffers in this case, so that could
- * perhaps still be made to work, even if less efficient, but there
- * is another catch: in order to perform cache maintenance on pages
- * allocated for discontiguous buffers we need to map and unmap the
- * SG table representing these buffers. This is fine for something
- * small like a push buffer, but it exhausts the bounce buffer pool
- * (typically on the order of a few MiB) for framebuffers (many MiB
- * for any modern resolution).
- *
- * Work around this by making sure that Tegra DRM clients only use
- * an IOMMU if the parent host1x also uses an IOMMU.
- *
- * Note that there's still a small gap here that we don't cover: if
- * the DMA API is backed by an IOMMU there's no way to control which
- * device is attached to an IOMMU and which isn't, except via wiring
- * up the device tree appropriately. This is considered an problem
- * of integration, so care must be taken for the DT to be consistent.
- */
- domain = iommu_get_domain_for_dev(drm->dev->parent);
-
- if (domain && iommu_present(&platform_bus_type)) {
- tegra->domain = iommu_domain_alloc(&platform_bus_type);
- if (!tegra->domain) {
- err = -ENOMEM;
- goto free;
- }
-
- err = iova_cache_get();
- if (err < 0)
- goto domain;
- }
-
- mutex_init(&tegra->clients_lock);
- INIT_LIST_HEAD(&tegra->clients);
-
- drm->dev_private = tegra;
- tegra->drm = drm;
-
- drm_mode_config_init(drm);
-
- drm->mode_config.min_width = 0;
- drm->mode_config.min_height = 0;
-
- drm->mode_config.max_width = 4096;
- drm->mode_config.max_height = 4096;
-
- drm->mode_config.allow_fb_modifiers = true;
-
- drm->mode_config.normalize_zpos = true;
-
- drm->mode_config.funcs = &tegra_drm_mode_config_funcs;
- drm->mode_config.helper_private = &tegra_drm_mode_config_helpers;
-
- err = tegra_drm_fb_prepare(drm);
- if (err < 0)
- goto config;
-
- drm_kms_helper_poll_init(drm);
-
- err = host1x_device_init(device);
- if (err < 0)
- goto fbdev;
-
- if (tegra->group) {
- u64 carveout_start, carveout_end, gem_start, gem_end;
- u64 dma_mask = dma_get_mask(&device->dev);
- dma_addr_t start, end;
- unsigned long order;
-
- start = tegra->domain->geometry.aperture_start & dma_mask;
- end = tegra->domain->geometry.aperture_end & dma_mask;
-
- gem_start = start;
- gem_end = end - CARVEOUT_SZ;
- carveout_start = gem_end + 1;
- carveout_end = end;
-
- order = __ffs(tegra->domain->pgsize_bitmap);
- init_iova_domain(&tegra->carveout.domain, 1UL << order,
- carveout_start >> order);
-
- tegra->carveout.shift = iova_shift(&tegra->carveout.domain);
- tegra->carveout.limit = carveout_end >> tegra->carveout.shift;
-
- drm_mm_init(&tegra->mm, gem_start, gem_end - gem_start + 1);
- mutex_init(&tegra->mm_lock);
-
- DRM_DEBUG_DRIVER("IOMMU apertures:\n");
- DRM_DEBUG_DRIVER(" GEM: %#llx-%#llx\n", gem_start, gem_end);
- DRM_DEBUG_DRIVER(" Carveout: %#llx-%#llx\n", carveout_start,
- carveout_end);
- } else if (tegra->domain) {
- iommu_domain_free(tegra->domain);
- tegra->domain = NULL;
- iova_cache_put();
- }
-
- if (tegra->hub) {
- err = tegra_display_hub_prepare(tegra->hub);
- if (err < 0)
- goto device;
- }
-
- /*
- * We don't use the drm_irq_install() helpers provided by the DRM
- * core, so we need to set this manually in order to allow the
- * DRM_IOCTL_WAIT_VBLANK to operate correctly.
- */
- drm->irq_enabled = true;
-
- /* syncpoints are used for full 32-bit hardware VBLANK counters */
- drm->max_vblank_count = 0xffffffff;
-
- err = drm_vblank_init(drm, drm->mode_config.num_crtc);
- if (err < 0)
- goto hub;
-
- drm_mode_config_reset(drm);
-
- err = tegra_drm_fb_init(drm);
- if (err < 0)
- goto hub;
-
- return 0;
-
-hub:
- if (tegra->hub)
- tegra_display_hub_cleanup(tegra->hub);
-device:
- if (tegra->domain) {
- mutex_destroy(&tegra->mm_lock);
- drm_mm_takedown(&tegra->mm);
- put_iova_domain(&tegra->carveout.domain);
- iova_cache_put();
- }
-
- host1x_device_exit(device);
-fbdev:
- drm_kms_helper_poll_fini(drm);
- tegra_drm_fb_free(drm);
-config:
- drm_mode_config_cleanup(drm);
-domain:
- if (tegra->domain)
- iommu_domain_free(tegra->domain);
-free:
- kfree(tegra);
- return err;
-}
-
-static void tegra_drm_unload(struct drm_device *drm)
-{
- struct host1x_device *device = to_host1x_device(drm->dev);
- struct tegra_drm *tegra = drm->dev_private;
- int err;
-
- drm_kms_helper_poll_fini(drm);
- tegra_drm_fb_exit(drm);
- drm_atomic_helper_shutdown(drm);
- drm_mode_config_cleanup(drm);
-
- err = host1x_device_exit(device);
- if (err < 0)
- return;
-
- if (tegra->domain) {
- mutex_destroy(&tegra->mm_lock);
- drm_mm_takedown(&tegra->mm);
- put_iova_domain(&tegra->carveout.domain);
- iova_cache_put();
- iommu_domain_free(tegra->domain);
- }
-
- kfree(tegra);
-}
-
static int tegra_drm_open(struct drm_device *drm, struct drm_file *filp)
{
struct tegra_drm_file *fpriv;
@@ -1046,8 +850,6 @@ static int tegra_debugfs_init(struct drm_minor *minor)
static struct drm_driver tegra_drm_driver = {
.driver_features = DRIVER_MODESET | DRIVER_GEM |
DRIVER_ATOMIC | DRIVER_RENDER,
- .load = tegra_drm_load,
- .unload = tegra_drm_unload,
.open = tegra_drm_open,
.postclose = tegra_drm_postclose,
.lastclose = drm_fb_helper_lastclose,
@@ -1231,6 +1033,8 @@ void tegra_drm_free(struct tegra_drm *tegra, size_t size, void *virt,
static int host1x_drm_probe(struct host1x_device *dev)
{
struct drm_driver *driver = &tegra_drm_driver;
+ struct iommu_domain *domain;
+ struct tegra_drm *tegra;
struct drm_device *drm;
int err;
@@ -1238,18 +1042,180 @@ static int host1x_drm_probe(struct host1x_device *dev)
if (IS_ERR(drm))
return PTR_ERR(drm);
+ tegra = kzalloc(sizeof(*tegra), GFP_KERNEL);
+ if (!tegra) {
+ err = -ENOMEM;
+ goto put;
+ }
+
+ /*
+ * If the Tegra DRM clients are backed by an IOMMU, push buffers are
+ * likely to be allocated beyond the 32-bit boundary if sufficient
+ * system memory is available. This is problematic on earlier Tegra
+ * generations where host1x supports a maximum of 32 address bits in
+ * the GATHER opcode. In this case, unless host1x is behind an IOMMU
+ * as well it won't be able to process buffers allocated beyond the
+ * 32-bit boundary.
+ *
+ * The DMA API will use bounce buffers in this case, so that could
+ * perhaps still be made to work, even if less efficient, but there
+ * is another catch: in order to perform cache maintenance on pages
+ * allocated for discontiguous buffers we need to map and unmap the
+ * SG table representing these buffers. This is fine for something
+ * small like a push buffer, but it exhausts the bounce buffer pool
+ * (typically on the order of a few MiB) for framebuffers (many MiB
+ * for any modern resolution).
+ *
+ * Work around this by making sure that Tegra DRM clients only use
+ * an IOMMU if the parent host1x also uses an IOMMU.
+ *
+ * Note that there's still a small gap here that we don't cover: if
+ * the DMA API is backed by an IOMMU there's no way to control which
+ * device is attached to an IOMMU and which isn't, except via wiring
+ * up the device tree appropriately. This is considered an problem
+ * of integration, so care must be taken for the DT to be consistent.
+ */
+ domain = iommu_get_domain_for_dev(drm->dev->parent);
+
+ if (domain && iommu_present(&platform_bus_type)) {
+ tegra->domain = iommu_domain_alloc(&platform_bus_type);
+ if (!tegra->domain) {
+ err = -ENOMEM;
+ goto free;
+ }
+
+ err = iova_cache_get();
+ if (err < 0)
+ goto domain;
+ }
+
+ mutex_init(&tegra->clients_lock);
+ INIT_LIST_HEAD(&tegra->clients);
+
dev_set_drvdata(&dev->dev, drm);
+ drm->dev_private = tegra;
+ tegra->drm = drm;
+
+ drm_mode_config_init(drm);
+
+ drm->mode_config.min_width = 0;
+ drm->mode_config.min_height = 0;
+
+ drm->mode_config.max_width = 4096;
+ drm->mode_config.max_height = 4096;
+
+ drm->mode_config.allow_fb_modifiers = true;
+
+ drm->mode_config.normalize_zpos = true;
+
+ drm->mode_config.funcs = &tegra_drm_mode_config_funcs;
+ drm->mode_config.helper_private = &tegra_drm_mode_config_helpers;
- err = drm_fb_helper_remove_conflicting_framebuffers(NULL, "tegradrmfb", false);
+ err = tegra_drm_fb_prepare(drm);
if (err < 0)
- goto put;
+ goto config;
+
+ drm_kms_helper_poll_init(drm);
+
+ err = host1x_device_init(dev);
+ if (err < 0)
+ goto fbdev;
+
+ if (tegra->group) {
+ u64 carveout_start, carveout_end, gem_start, gem_end;
+ u64 dma_mask = dma_get_mask(&dev->dev);
+ dma_addr_t start, end;
+ unsigned long order;
+
+ start = tegra->domain->geometry.aperture_start & dma_mask;
+ end = tegra->domain->geometry.aperture_end & dma_mask;
+
+ gem_start = start;
+ gem_end = end - CARVEOUT_SZ;
+ carveout_start = gem_end + 1;
+ carveout_end = end;
+
+ order = __ffs(tegra->domain->pgsize_bitmap);
+ init_iova_domain(&tegra->carveout.domain, 1UL << order,
+ carveout_start >> order);
+
+ tegra->carveout.shift = iova_shift(&tegra->carveout.domain);
+ tegra->carveout.limit = carveout_end >> tegra->carveout.shift;
+
+ drm_mm_init(&tegra->mm, gem_start, gem_end - gem_start + 1);
+ mutex_init(&tegra->mm_lock);
+
+ DRM_DEBUG_DRIVER("IOMMU apertures:\n");
+ DRM_DEBUG_DRIVER(" GEM: %#llx-%#llx\n", gem_start, gem_end);
+ DRM_DEBUG_DRIVER(" Carveout: %#llx-%#llx\n", carveout_start,
+ carveout_end);
+ } else if (tegra->domain) {
+ iommu_domain_free(tegra->domain);
+ tegra->domain = NULL;
+ iova_cache_put();
+ }
+
+ if (tegra->hub) {
+ err = tegra_display_hub_prepare(tegra->hub);
+ if (err < 0)
+ goto device;
+ }
+
+ /*
+ * We don't use the drm_irq_install() helpers provided by the DRM
+ * core, so we need to set this manually in order to allow the
+ * DRM_IOCTL_WAIT_VBLANK to operate correctly.
+ */
+ drm->irq_enabled = true;
+
+ /* syncpoints are used for full 32-bit hardware VBLANK counters */
+ drm->max_vblank_count = 0xffffffff;
+
+ err = drm_vblank_init(drm, drm->mode_config.num_crtc);
+ if (err < 0)
+ goto hub;
+
+ drm_mode_config_reset(drm);
+
+ err = drm_fb_helper_remove_conflicting_framebuffers(NULL, "tegradrmfb",
+ false);
+ if (err < 0)
+ goto hub;
+
+ err = tegra_drm_fb_init(drm);
+ if (err < 0)
+ goto hub;
err = drm_dev_register(drm, 0);
if (err < 0)
- goto put;
+ goto fb;
return 0;
+fb:
+ tegra_drm_fb_exit(drm);
+hub:
+ if (tegra->hub)
+ tegra_display_hub_cleanup(tegra->hub);
+device:
+ if (tegra->domain) {
+ mutex_destroy(&tegra->mm_lock);
+ drm_mm_takedown(&tegra->mm);
+ put_iova_domain(&tegra->carveout.domain);
+ iova_cache_put();
+ }
+
+ host1x_device_exit(dev);
+fbdev:
+ drm_kms_helper_poll_fini(drm);
+ tegra_drm_fb_free(drm);
+config:
+ drm_mode_config_cleanup(drm);
+domain:
+ if (tegra->domain)
+ iommu_domain_free(tegra->domain);
+free:
+ kfree(tegra);
put:
drm_dev_put(drm);
return err;
@@ -1258,8 +1224,29 @@ static int host1x_drm_probe(struct host1x_device *dev)
static int host1x_drm_remove(struct host1x_device *dev)
{
struct drm_device *drm = dev_get_drvdata(&dev->dev);
+ struct tegra_drm *tegra = drm->dev_private;
+ int err;
drm_dev_unregister(drm);
+
+ drm_kms_helper_poll_fini(drm);
+ tegra_drm_fb_exit(drm);
+ drm_atomic_helper_shutdown(drm);
+ drm_mode_config_cleanup(drm);
+
+ err = host1x_device_exit(dev);
+ if (err < 0)
+ dev_err(&dev->dev, "host1x device cleanup failed: %d\n", err);
+
+ if (tegra->domain) {
+ mutex_destroy(&tegra->mm_lock);
+ drm_mm_takedown(&tegra->mm);
+ put_iova_domain(&tegra->carveout.domain);
+ iova_cache_put();
+ iommu_domain_free(tegra->domain);
+ }
+
+ kfree(tegra);
drm_dev_put(drm);
return 0;
--
2.23.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
