2012/5/26 Rafał Miłecki <zajec5@xxxxxxxxx>: > 2012/5/26 Rafał Miłecki <zajec5@xxxxxxxxx>: >> 2012/5/6 Rafał Miłecki <zajec5@xxxxxxxxx>: >>> + WREG32(HDMI0_AUDIO_PACKET_CONTROL + offset, >>> + HDMI0_AUDIO_SAMPLE_SEND | /* send audio packets */ >>> + HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */ >>> + HDMI0_AUDIO_SEND_MAX_PACKETS | /* send NULL packets if no audio is available */ >>> + HDMI0_AUDIO_PACKETS_PER_LINE(3) | /* should be suffient for all audio modes and small enough for all hblanks */ >>> + HDMI0_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */ >> >> Alex, I've problem with the above code. I've arrived to my parent's >> house and I noticed audio doesn't work anymore with Onkyo TX-SR605. >> The problem is caused by: >> HDMI0_AUDIO_SEND_MAX_PACKETS >> >> Setting this bit doesn't seem to be problem for my Denon 1912, so I >> didn't notice that earlier. Before the rewrite modesetting we weren't >> set that bit, so it's actually a regression for my case with Onkyo. >> >> Can you say something more about this bit? My only solution is to just >> don't set it, but maybe there's a better one? > > The same happens when I connect my RV620 directly to the TV (not using > Onkyo between as audio receiver). My TV is Sony BRAVIA KDL-52X3500. > Setting bit HDMI0_AUDIO_SEND_MAX_PACKETS also causes no audio in TV. Last e-mail for today (well, it's only 25 minutes left here ;) ). I've decided to give fglrx a chance (12.4). 1) RV620 connected directly to Sony BRAVIA KDL-52X3500 [ 234.399] (WW) fglrx(0): Incorrect HDMI dongle found, HDMI audio disabled. I couldn't play anything. 2) RV620 connected to Onkyo TX-SR605 Audio playing, but fglrx set 0x7408 to: 0x10020011 so it seems fglrx isn't using HDMI0_AUDIO_SEND_MAX_PACKETS == 0x100 Setting that bit while using fglrx broke audio. I did one more test with a different TV: Sony BRAVIA KDL-40S40xx. The results are the same. fglrx sets 0x7408 to: 0x10020011 (so HDMI0_AUDIO_SEND_MAX_PACKETS is not set). Setting that bit manually (while using fglrx) breaks audio. It just seems to me we shouldn't set that bit at all... -- Rafał _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
