On Wed, Oct 09, 2019 at 10:51:26AM +0200, Jean-Jacques Hiblot wrote: > Add DT binding for led-backlight. > > Cc: devicetree@xxxxxxxxxxxxxxx > Signed-off-by: Jean-Jacques Hiblot <jjhiblot@xxxxxx> > > --- > > .../leds/backlight/led-backlight.yaml | 55 +++++++++++++++++++ > 1 file changed, 55 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml > > diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml > new file mode 100644 > index 000000000000..47ae3d6b4f31 > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml > @@ -0,0 +1,55 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/leds/backlight/led-backlight.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: LED-based Backlight Device Tree Bindings > + > +maintainers: > + - Jean-Jacques Hiblot <jjhiblot@xxxxxx> > + > +description: | > + This binding is used to describe a basic backlight device made of LEDs. > + It can also be used to describe a backlight device controlled by the > + output of a LED driver. > + > +properties: > + compatible: > + const: led-backlight > + > + leds: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: List of LEDs constitutive of the backlight. > + > + default-brightness: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: Default brightness level on boot. It's not clear that this is an index when 'brightness-levels' is present and absolute level when not. I wonder if we've been consistent on that? > + minimum: 0 Implied by being a uint32. > + > + brightness-levels: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + description: Array of distinct brightness levels. The levels must be in > + the range accepted by the underlying LED devices. This is used to > + translate a backlight brightness level into a LED brightness level. If > + it is not provided, the identity mapping is used. > + > +required: > + - compatible > + - backlight-leds leds? Add 'additionalProperties: false' here. > + > +examples: > + - | > + backlight { Please also define $nodename is 'backlight'. > + compatible = "led-backlight"; > + backlight-leds = <&led1>; leds? > + brightness-levels = <0 4 8 16 32 64 128 255>; > + default-brightness = <6>; /*6th level => brightness of the LEDs is 128*/ > + }; > + - | > + backlight { > + compatible = "led-backlight"; > + backlight-leds = <&led1>, <&led2>; > + default-brightness = <255>; > + }; > +... > -- > 2.17.1 > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
