Re: kernel 3.4.0 oops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2012-05-22 at 11:20 +0200, Daniel Vetter wrote:

> Can you please attach the complete dmesg that contains this WARN
> backtrace? Depending upon how we ended up here, we should get more stuff
> (which would be pretty important to know to correctly diagnose the bug).
> -Daniel

The oops happens in X(KDE) when I run:
# xrandr -d :0 --output LVDS1 --off --noprimary
# xrandr -d :0 --output VGA1 --mode 1280x1024 --refresh 75
(I have a laptop and an external monitor connected to the laptop VGA
port; with the above commands I close the laptop LCD and I only use the
external VGA  display).

Below is dmesg output.
3hot D3cold
pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xd4908000-0xd49083ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b0b] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io  0x5028-0x502f]
pci 0000:00:1f.2: reg 14: [io  0x503c-0x503f]
pci 0000:00:1f.2: reg 18: [io  0x5020-0x5027]
pci 0000:00:1f.2: reg 1c: [io  0x5038-0x503b]
pci 0000:00:1f.2: reg 20: [io  0x5000-0x501f]
pci 0000:00:1f.2: reg 24: [mem 0xd4907000-0xd49077ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 10: [mem 0xd4906000-0xd4906fff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [mem 0xd4800000-0xd48fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-42]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0xd0800000-0xd47fffff]
pci 0000:43:00.0: [1814:3090] type 00 class 0x028000
pci 0000:43:00.0: reg 10: [mem 0xd0700000-0xd070ffff]
pci 0000:00:1c.3: PCI bridge to [bus 43-43]
pci 0000:00:1c.3:   bridge window [mem 0xd0700000-0xd07fffff]
pci 0000:44:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:44:00.0: reg 10: [io  0x2000-0x20ff]
pci 0000:44:00.0: reg 18: [mem 0xd0404000-0xd0404fff 64bit pref]
pci 0000:44:00.0: reg 20: [mem 0xd0400000-0xd0403fff 64bit pref]
pci 0000:44:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:44:00.0: supports D1 D2
pci 0000:44:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 44-44]
pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.5:   bridge window [mem 0xd0600000-0xd06fffff]
pci 0000:00:1c.5:   bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 45-45] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xd0500000-0xd05fffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive
decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive
decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff]
(subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfedfffff]
(subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfee01000-0xffffffff]
(subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
PCI host bridge to bus 0000:ff
pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
pci_bus 0000:ff: on NUMA node 0
 pci0000:ff: Requesting ACPI _OSC control (0x1d)
 pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control
mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0,
disabled.
xen/balloon: Initialising balloon driver.
xen-balloon: Initialising balloon driver.
xen/balloon: Xen selfballooning driver disabled for domain0.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io
+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
Advanced Linux Sound Architecture Driver Version 1.0.25.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f000 - 000000000009ffff 
reserve RAM buffer: 00000000bafcf000 - 00000000bbffffff 
reserve RAM buffer: 00000000bb800000 - 00000000bbffffff 
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switching to clocksource xen
FS-Cache: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-fe]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xc0000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfedfffff window]
pnp 00:00: [mem 0xfee01000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
pnp 00:01: [mem 0xfed10000-0xfed13fff]
pnp 00:01: [mem 0xfed1b000-0xfed1bfff]
pnp 00:01: [mem 0xfed19000-0xfed19fff]
pnp 00:01: [mem 0xd4a00000-0xd4a00fff]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xfed20000-0xfed3ffff]
pnp 00:01: [mem 0xfed90000-0xfed8ffff disabled]
pnp 00:01: [mem 0xfed45000-0xfed8ffff]
pnp 00:01: [mem 0xfec00000-0xfec00fff]
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xd4a00000-0xd4a00fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io  0x0000-0x001f]
pnp 00:02: [io  0x0081-0x0091]
pnp 00:02: [io  0x0093-0x009f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io  0x00f0]
xen: registering gsi 13 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 13 for gsi 13
xen: --> pirq=13 -> irq=13 (gsi=13)
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io  0x002e-0x002f]
pnp 00:06: [io  0x004e-0x004f]
pnp 00:06: [io  0x0061]
pnp 00:06: [io  0x0063]
pnp 00:06: [io  0x0065]
pnp 00:06: [io  0x0067]
pnp 00:06: [io  0x0070]
pnp 00:06: [io  0x0080]
pnp 00:06: [io  0x0092]
pnp 00:06: [io  0x00b2-0x00b3]
pnp 00:06: [io  0x0200-0x027f]
pnp 00:06: [io  0x1000-0x100f]
pnp 00:06: [io  0xffff]
pnp 00:06: [io  0xffff]
pnp 00:06: [io  0x0400-0x047f]
pnp 00:06: [io  0x0500-0x057f]
pnp 00:06: [io  0xef80-0xef9f]
system 00:06: [io  0x0200-0x027f] has been reserved
system 00:06: [io  0x1000-0x100f] has been reserved
system 00:06: [io  0xffff] has been reserved
system 00:06: [io  0xffff] has been reserved
system 00:06: [io  0x0400-0x047f] has been reserved
system 00:06: [io  0x0500-0x057f] has been reserved
system 00:06: [io  0xef80-0xef9f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x0070-0x0077]
xen: registering gsi 8 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 8 for gsi 8
xen: --> pirq=8 -> irq=8 (gsi=8)
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io  0x0060]
pnp 00:08: [io  0x0064]
xen: registering gsi 1 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 1 for gsi 1
xen: --> pirq=1 -> irq=1 (gsi=1)
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
xen: registering gsi 12 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 12 for gsi 12
xen: --> pirq=12 -> irq=12 (gsi=12)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs SYN0168 SYN0100 SYN0002
PNP0f13 (active)
xen: registering gsi 23 triggering 1 polarity 0
xen: --> pirq=23 -> irq=23 (gsi=23)
pnp 00:0a: [irq 23]
pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active)
pnp 00:0b: [bus ff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PM-Timer failed consistency check  (0x0xffffff) - aborting.
pci 0000:44:00.0: no compatible bridge window for [mem
0xfffe0000-0xffffffff pref]
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref]
to [bus 02-42] add_size 200000
pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref]
get_res_add_size add_size 200000
pci 0000:00:1c.1: BAR 9: assigned [mem 0xd4b00000-0xd4cfffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [mem 0xd4800000-0xd48fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-42]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0xd0800000-0xd47fffff]
pci 0000:00:1c.1:   bridge window [mem 0xd4b00000-0xd4cfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 43-43]
pci 0000:00:1c.3:   bridge window [mem 0xd0700000-0xd07fffff]
pci 0000:44:00.0: BAR 6: assigned [mem 0xd0420000-0xd043ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 44-44]
pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.5:   bridge window [mem 0xd0600000-0xd06fffff]
pci 0000:00:1c.5:   bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 45-45]
pci 0000:00:1e.0:   bridge window [mem 0xd0500000-0xd05fffff]
xen: registering gsi 17 triggering 0 polarity 1
xen: --> pirq=17 -> irq=17 (gsi=17)
xen: registering gsi 16 triggering 0 polarity 1
xen: --> pirq=16 -> irq=16 (gsi=16)
xen: registering gsi 19 triggering 0 polarity 1
xen: --> pirq=19 -> irq=19 (gsi=19)
xen: registering gsi 16 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 16 for gsi 16
xen: --> pirq=16 -> irq=16 (gsi=16)
Already setup the GSI :16
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xd4800000-0xd48fffff]
pci_bus 0000:02: resource 0 [io  0x3000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xd0800000-0xd47fffff]
pci_bus 0000:02: resource 2 [mem 0xd4b00000-0xd4cfffff 64bit pref]
pci_bus 0000:43: resource 1 [mem 0xd0700000-0xd07fffff]
pci_bus 0000:44: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:44: resource 1 [mem 0xd0600000-0xd06fffff]
pci_bus 0000:44: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref]
pci_bus 0000:45: resource 1 [mem 0xd0500000-0xd05fffff]
pci_bus 0000:45: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:45: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:45: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:45: resource 7 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:45: resource 8 [mem 0xf0000000-0xfedfffff]
pci_bus 0000:45: resource 9 [mem 0xfee01000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
xen: registering gsi 16 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 16 for gsi 16
xen: --> pirq=16 -> irq=16 (gsi=16)
Already setup the GSI :16
xen: registering gsi 20 triggering 0 polarity 1
xen: --> pirq=20 -> irq=20 (gsi=20)
PCI: CLS 64 bytes, default 64
kvm: no hardware support
microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>,
Peter Oruba
NFS: Registering the id_resolver key type
NTFS driver 2.1.30 [Flags: R/O].
fuse init (API version 7.18)
Btrfs loaded
msgmni has been set to 12819
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
NET: Registered protocol family 38
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:43:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:44:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: does not run on family 6 model 37
ACPI: Deprecated procfs I/F for AC is loaded, please retry with
CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button
as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch
as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [EXTZ] (51 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [EX2Z] (0 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [PWMZ] (0 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (51 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [GFXZ] (0 C)
thermal LNXTHERM:05: registered as thermal_zone5
ACPI: Thermal Zone [BATZ] (32 C)
thermal LNXTHERM:06: registered as thermal_zone6
ACPI: Thermal Zone [EGXZ] (0 C)
thermal LNXTHERM:07: registered as thermal_zone7
ACPI: Thermal Zone [CPUZ] (58 C)
thermal LNXTHERM:08: registered as thermal_zone8
ACPI: Thermal Zone [MCHZ] (62 C)
thermal LNXTHERM:09: registered as thermal_zone9
ACPI: Thermal Zone [PCHZ] (68 C)
ioatdma: Intel(R) QuickData Technology Driver 4.00
Event-channel device installed.
xen-pciback: backend is vpci
Real Time Clock Driver v1.12b
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K
mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[drm] Initialized drm 1.1.0 20060810
xen: registering gsi 16 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 16 for gsi 16
xen: --> pirq=16 -> irq=16 (gsi=16)
Already setup the GSI :16
i915 0000:00:02.0: setting latency timer to 64
ACPI: Deprecated procfs I/F for battery is loaded, please retry with
CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
[drm] MTRR allocation failed.  Graphics performance may suffer.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io
+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
acpi device:0e: registered as cooling_device4
input: Video Bus
as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input3
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
loop: module loaded
ahci 0000:00:1f.2: version 3.0
xen: registering gsi 21 triggering 0 polarity 1
xen: --> pirq=21 -> irq=21 (gsi=21)
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA
mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
ems sxs apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd4907000 port 0xd4907100 irq 301
ata2: SATA max UDMA/133 abar m2048@0xd4907000 port 0xd4907180 irq 301
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xd4907000 port 0xd4907300 irq 301
ata6: DUMMY
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
hso: drivers/net/usb/hso.c: Option Wireless
usbcore: registered new interface driver hso
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xen: registering gsi 16 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 16 for gsi 16
xen: --> pirq=16 -> irq=16 (gsi=16)
Already setup the GSI :16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd4909000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xen: registering gsi 20 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 20 for gsi 20
xen: --> pirq=20 -> irq=20 (gsi=20)
Already setup the GSI :20
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 20, io mem 0xd4908000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq
1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-devel@xxxxxxxxxx
device-mapper: multipath: version 1.3.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath queue-length: version 0.1.0 loaded
device-mapper: multipath service-time: version 0.2.0 loaded
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
zram: num_devices not specified. Using default: 1
zram: Creating 1 devices ...
hp_accel: hardware type HPB432x found
lis3lv02d: 8 bits sensor found
input: AT Translated Set 2 keyboard
as /devices/platform/i8042/serio0/input/input4
input: ST LIS3LV02DL Accelerometer
as /devices/platform/lis3lv02d/input/input5
Registered led device: hp::hddprotect
hp_accel: driver loaded
input: HP WMI hotkeys as /devices/virtual/input/input6
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25,
expected 29)
xen: registering gsi 18 triggering 0 polarity 1
xen: --> pirq=18 -> irq=18 (gsi=18)
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
xen: registering gsi 17 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 17 for gsi 17
xen: --> pirq=17 -> irq=17 (gsi=17)
Already setup the GSI :17
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
gre: GRE over IPv4 demultiplexor driver
ip_gre: GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
Mobile IPv6
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Registering the dns_resolver key type
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: unexpected _GTF length (8)
ata2.00: ATA-8: ST9250410AS, 0006HPM1, max UDMA/100
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: unexpected _GTF length (8)
ata2.00: configured for UDMA/100
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata1.00: unexpected _GTF length (8)
ata1.00: ATA-8: KINGSTON SH100S3120G, 332ABBF0, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: unexpected _GTF length (8)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SH100S3 332A PQ: 0
ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
scsi 1:0:0:0: Direct-Access     ATA      ST9250410AS      0006 PQ: 0
ANSI: 5
sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
 sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
registered taskstats version 1
hub 1-1:1.0: USB hub found
ALSA device list:
  #0: HDA Intel at 0xd4900000 irq 302
hub 1-1:1.0: 6 ports detected
Waiting 1sec before mounting root device...
usb 2-1: new high-speed USB device number 2 using ehci_hcd
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.4: new low-speed USB device number 3 using ehci_hcd
input: Logitech USB Receiver
as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7
generic-usb 0003:046D:C518.0001: input: USB HID v1.11 Mouse [Logitech
USB Receiver] on usb-0000:00:1a.0-1.4/input0
input: Logitech USB Receiver
as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input8
generic-usb 0003:046D:C518.0002: input: USB HID v1.11 Device [Logitech
USB Receiver] on usb-0000:00:1a.0-1.4/input1
usb 1-1.5: new high-speed USB device number 4 using ehci_hcd
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts:
(null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
devtmpfs: mounted
Freeing unused kernel memory: 564k freed
udevd[233]: starting version 182
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
xen: registering gsi 17 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 17 for gsi 17
xen: --> pirq=17 -> irq=17 (gsi=17)
Already setup the GSI :17
r8169 0000:44:00.0: eth0: RTL8168d/8111d at 0xffffc900100aa000,
98:4b:e1:8d:13:c4, XID 083000c0 IRQ 303
r8169 0000:44:00.0: eth0: jumbo features [frames: 9200 bytes, tx
checksumming: ko]
cfg80211: Calling CRDA to update world regulatory domain
xen: registering gsi 19 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 19 for gsi 19
xen: --> pirq=19 -> irq=19 (gsi=19)
Already setup the GSI :19
phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 3090, rf: 0005,
rev: 3213.
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2800pci-phy0::radio
Registered led device: rt2800pci-phy0::assoc
Registered led device: rt2800pci-phy0::quality
usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
scsi6 : usb-storage 2-1.1:1.0
psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1,
caps: 0xd04733/0xe40000/0x5a0400
input: SynPS/2 Synaptics TouchPad
as /devices/platform/i8042/serio4/input/input9
Adding 4194300k swap on /dev/sdb2.  Priority:1 extents:1
across:4194300k 
EXT4-fs (sda2): re-mounted. Opts: discard,barrier=0,errors=remount-ro
scsi 6:0:0:0: Direct-Access     Kingmax  USB2.0 FlashDisk 1100 PQ: 0
ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] 7471104 512-byte logical blocks: (3.82 GB/3.56 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdc] No Caching mode page present
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] No Caching mode page present
sd 6:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 6:0:0:0: [sdc] No Caching mode page present
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Attached SCSI removable disk
EXT4-fs (sdb3): barriers disabled
EXT4-fs (sdb3): mounted filesystem with writeback data mode. Opts:
barrier=0,errors=remount-ro
r8169 0000:44:00.0: eth0: link down
r8169 0000:44:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (zram0): barriers disabled
EXT4-fs (zram0): mounted filesystem with ordered data mode. Opts:
barrier=0
r8169 0000:44:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
eth0: no IPv6 routers present
ata1.00: configured for UDMA/133
ata1: EH complete
ata2.00: configured for UDMA/100
ata2: EH complete
EXT4-fs (sda2): re-mounted. Opts:
discard,barrier=0,errors=remount-ro,commit=0
EXT4-fs (sdb3): re-mounted. Opts: barrier=0,errors=remount-ro,commit=0
EXT4-fs (zram0): re-mounted. Opts: barrier=0,commit=0
[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged!
[drm:i915_reset] *ERROR* Failed to reset chip.
------------[ cut here ]------------
WARNING: at drivers/gpu/drm/i915/i915_gem.c:2410
i915_gem_object_put_fence+0x9c/0xb0()
Hardware name: HP ProBook 4320s
Modules linked in: rt2800pci eeprom_93cx6 rt2x00pci rt2800lib rt2x00lib
psmouse mac80211 cfg80211 r8169
Pid: 1047, comm: X Not tainted 3.4.0 #2
Call Trace:
 [<ffffffff8107ae0b>] ? warn_slowpath_common+0x7b/0xc0
 [<ffffffff814629dc>] ? i915_gem_object_put_fence+0x9c/0xb0
 [<ffffffff81463e81>] ? i915_gem_object_unbind+0x91/0x1f0
 [<ffffffff81463ff9>] ? i915_gem_free_object_tail+0x19/0xc0
 [<ffffffff814407c8>] ? drm_gem_handle_delete+0x118/0x140
 [<ffffffff8143ea6e>] ? drm_ioctl+0x2ce/0x4e0
 [<ffffffff81440ca0>] ? drm_gem_destroy+0x50/0x50
 [<ffffffff8110152e>] ? tlb_finish_mmu+0xe/0x50
 [<ffffffff8113c1a6>] ? do_vfs_ioctl+0x96/0x500
 [<ffffffff811088da>] ? remove_vma+0x4a/0x70
 [<ffffffff81109ad5>] ? do_munmap+0x2d5/0x360
 [<ffffffff8113c659>] ? sys_ioctl+0x49/0x80
 [<ffffffff817cc639>] ? system_call_fastpath+0x16/0x1b
---[ end trace 436b2a5858675f74 ]---


_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel


[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux