On Thu, Jul 25, 2019 at 12:51:30PM +0200, Noralf Trønnes wrote: > This makes the tiny drivers visible by default without having to enable a > knob. > > Signed-off-by: Noralf Trønnes <noralf@xxxxxxxxxxx> > Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx> to it once > --- > drivers/gpu/drm/Makefile | 2 +- > drivers/gpu/drm/tinydrm/Kconfig | 37 +++++++++++++++++++-------------- > 2 files changed, 22 insertions(+), 17 deletions(-) Bisection says this patch (28c47e16ea2a19adb47fe2c182cbd61cb854237c) breaks kconfig stuff in v5.4-rc by creating circular dependencies. Could someone send a -rc patch to fix this please? THINKPAD_ACPI (defined at drivers/platform/x86/Kconfig:484), with definition... ...depends on FB_SSD1307 (defined at drivers/video/fbdev/Kconfig:2259), with definition... ...depends on FB (defined at drivers/video/fbdev/Kconfig:12), with definition... ...depends on DRM_KMS_FB_HELPER (defined at drivers/gpu/drm/Kconfig:79), with definition... ...depends on DRM_KMS_HELPER (defined at drivers/gpu/drm/Kconfig:73), with definition... ...depends on TINYDRM_REPAPER (defined at drivers/gpu/drm/tinydrm/Kconfig:51), with definition... ...depends on THERMAL (defined at drivers/thermal/Kconfig:6), with definition... ...depends on SENSORS_NPCM7XX (defined at drivers/hwmon/Kconfig:1285), with definition... ...depends on HWMON (defined at drivers/hwmon/Kconfig:6), with definition... ...depends on THINKPAD_ACPI (defined at drivers/platform/x86/Kconfig:484), with definition... ...depends on ACPI_VIDEO (defined at drivers/acpi/Kconfig:193), with definition... ...depends on ACER_WMI (defined at drivers/platform/x86/Kconfig:19), with definition... ...depends on BACKLIGHT_CLASS_DEVICE (defined at drivers/video/backlight/Kconfig:144), with definition... ...depends again on THINKPAD_ACPI (defined at drivers/platform/x86/Kconfig:484) Full output: kconfiglib.KconfigError: Dependency loop =============== THINKPAD_ACPI (defined at drivers/platform/x86/Kconfig:484), with definition... config THINKPAD_ACPI tristate "ThinkPad ACPI Laptop Extras" select HWMON select NVRAM select NEW_LEDS select LEDS_CLASS select LEDS_TRIGGERS select LEDS_TRIGGER_AUDIO depends on ACPI && ACPI_BATTERY && INPUT && (RFKILL || RFKILL = n) && (ACPI_VIDEO || ACPI_VIDEO = n) && BACKLIGHT_CLASS_DEVICE && X86_PLATFORM_DEVICES && X86 help This is a driver for the IBM and Lenovo ThinkPad laptops. It adds support for Fn-Fx key combinations, Bluetooth control, video output switching, ThinkLight control, UltraBay eject and more. For more information about this driver see <file:Documentation/admin-guide/laptops/thinkpad-acpi.rst> and <http://ibm-acpi.sf.net/> . This driver was formerly known as ibm-acpi. Extra functionality will be available if the rfkill (CONFIG_RFKILL) and/or ALSA (CONFIG_SND) subsystems are available in the kernel. Note that if you want ThinkPad-ACPI to be built-in instead of modular, ALSA and rfkill will also have to be built-in. If you have an IBM or Lenovo ThinkPad laptop, say Y or M here. ...depends on ACPI_VIDEO (defined at drivers/acpi/Kconfig:193), with definition... config ACPI_VIDEO tristate "Video" select THERMAL depends on X86 && BACKLIGHT_CLASS_DEVICE && INPUT && ACPI help This driver implements the ACPI Extensions For Display Adapters for integrated graphics devices on motherboard, as specified in ACPI 2.0 Specification, Appendix B. This supports basic operations such as defining the video POST device, retrieving EDID information, and setting up a video output. To compile this driver as a module, choose M here: the module will be called video. (select-related dependencies: (DRM_NOUVEAU && ACPI && X86 && BACKLIGHT_CLASS_DEVICE && INPUT && DRM && PCI && MMU && HAS_IOMEM) || (DRM_NOUVEAU && ACPI && X86 && DRM && PCI && MMU && HAS_IOMEM) || (DRM_I915 && ACPI && DRM && X86 && PCI && HAS_IOMEM) || (DRM_GMA500 && ACPI && DRM && PCI && X86 && MMU && HAS_IOMEM) || (ACER_WMI && ACPI && ACPI && BACKLIGHT_CLASS_DEVICE && SERIO_I8042 && INPUT && (RFKILL || RFKILL = n) && ACPI_WMI && X86_PLATFORM_DEVICES && X86)) ...depends on ACER_WMI (defined at drivers/platform/x86/Kconfig:19), with definition... config ACER_WMI tristate "Acer WMI Laptop Extras" select LEDS_CLASS select NEW_LEDS select INPUT_SPARSEKMAP select ACPI_VIDEO if ACPI depends on ACPI && BACKLIGHT_CLASS_DEVICE && SERIO_I8042 && INPUT && (RFKILL || RFKILL = n) && ACPI_WMI && X86_PLATFORM_DEVICES && X86 help This is a driver for newer Acer (and Wistron) laptops. It adds wireless radio and bluetooth control, and on some laptops, exposes the mail LED and LCD backlight. If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M here. ...depends on SERIO_I8042 (defined at drivers/input/serio/Kconfig:29), with definition... config SERIO_I8042 tristate "i8042 PC Keyboard controller" default y depends on ARCH_MIGHT_HAVE_PC_SERIO && SERIO && !UML help i8042 is the chip over which the standard AT keyboard and PS/2 mouse are connected to the computer. If you use these devices, you'll need to say Y here. If unsure, say Y. To compile this driver as a module, choose M here: the module will be called i8042. (select-related dependencies: (KEYBOARD_ATKBD && ARCH_MIGHT_HAVE_PC_SERIO && INPUT_KEYBOARD && INPUT && !UML) || (MOUSE_PS2 && ARCH_MIGHT_HAVE_PC_SERIO && INPUT_MOUSE && INPUT && !UML)) ...depends on SERIO (defined at drivers/input/serio/Kconfig:5), with definition... config SERIO tristate "Serial I/O support" default y depends on !UML help Say Yes here if you have any input device that uses serial I/O to communicate with the system. This includes the * standard AT keyboard and PS/2 mouse * as well as serial mice, Sun keyboards, some joysticks and 6dof devices and more. If unsure, say Y. To compile this driver as a module, choose M here: the module will be called serio. (select-related dependencies: (KEYBOARD_ATKBD && INPUT_KEYBOARD && INPUT && !UML) || (KEYBOARD_LKKBD && INPUT_KEYBOARD && INPUT && !UML) || (KEYBOARD_HIL && (GSC || HP300) && INPUT_KEYBOARD && INPUT && !UML) || (KEYBOARD_NEWTON && INPUT_KEYBOARD && INPUT && !UML) || (KEYBOARD_STOWAWAY && INPUT_KEYBOARD && INPUT && !UML) || (KEYBOARD_SUNKBD && INPUT_KEYBOARD && INPUT && !UML) || (KEYBOARD_XTKBD && INPUT_KEYBOARD && INPUT && !UML) || (MOUSE_PS2 && INPUT_MOUSE && INPUT && !UML) || (MOUSE_SERIAL && INPUT_MOUSE && INPUT && !UML) || (MOUSE_VSXXXAA && INPUT_MOUSE && INPUT && !UML) || (JOYSTICK_WARRIOR && INPUT_JOYSTICK && INPUT && !UML) || (JOYSTICK_MAGELLAN && INPUT_JOYSTICK && INPUT && !UML) || (JOYSTICK_SPACEORB && INPUT_JOYSTICK && INPUT && !UML) || (JOYSTICK_SPACEBALL && INPUT_JOYSTICK && INPUT && !UML) || (JOYSTICK_STINGER && INPUT_JOYSTICK && INPUT && !UML) || (JOYSTICK_TWIDJOY && INPUT_JOYSTICK && INPUT && !UML) || (JOYSTICK_ZHENHUA && INPUT_JOYSTICK && INPUT && !UML) || (TABLET_SERIAL_WACOM4 && INPUT_TABLET && INPUT && !UML) || (TOUCHSCREEN_DYNAPRO && INPUT_TOUCHSCREEN && INPUT && !UML) || (TOUCHSCREEN_HAMPSHIRE && INPUT_TOUCHSCREEN && INPUT && !UML) || (TOUCHSCREEN_EGALAX_SERIAL && INPUT_TOUCHSCREEN && INPUT && !UML) || (TOUCHSCREEN_FUJITSU && INPUT_TOUCHSCREEN && INPUT && !UML) || (TOUCHSCREEN_GUNZE && INPUT_TOUCHSCREEN && INPUT && !UML) || (TOUCHSCREEN_ELO && INPUT_TOUCHSCREEN && INPUT && !UML) || (TOUCHSCREEN_WACOM_W8001 && INPUT_TOUCHSCREEN && INPUT && !UML) || (TOUCHSCREEN_MTOUCH && INPUT_TOUCHSCREEN && INPUT && !UML) || (TOUCHSCREEN_INEXIO && INPUT_TOUCHSCREEN && INPUT && !UML) || (TOUCHSCREEN_PENMOUNT && INPUT_TOUCHSCREEN && INPUT && !UML) || (TOUCHSCREEN_TOUCHRIGHT && INPUT_TOUCHSCREEN && INPUT && !UML) || (TOUCHSCREEN_TOUCHWIN && INPUT_TOUCHSCREEN && INPUT && !UML) || (TOUCHSCREEN_TOUCHIT213 && INPUT_TOUCHSCREEN && INPUT && !UML) || (TOUCHSCREEN_TSC_SERIO && INPUT_TOUCHSCREEN && INPUT && !UML) || (RMI4_F03_SERIO && RMI4_CORE && RMI4_F03 && RMI4_CORE && INPUT && !UML) || (I2C_TAOS_EVM && TTY && HAS_IOM EM && I2C) || (USB_PULSE8_CEC && USB_ACM && MEDIA_CEC_SUPPORT && MEDIA_USB_SUPPORT && USB && MEDIA_SUPPORT && MEDIA_SUPPORT) || (USB_RAINSHADOW_CEC && USB_ACM && MEDIA_CEC_SUPPORT && MEDIA_USB_SUPPORT && USB && MEDIA_SUPPORT && MEDIA_SUPPORT)) ...depends on RMI4_F03 (defined at drivers/input/rmi4/Kconfig:46), with definition... config RMI4_F03 bool "RMI4 Function 03 (PS2 Guest)" depends on RMI4_CORE && RMI4_CORE && INPUT && !UML help Say Y here if you want to add support for RMI4 function 03. Function 03 provides PS2 guest support for RMI4 devices. This includes support for TrackPoints on TouchPads. (select-related dependencies: HID_RMI && HID && HID && HID && INPUT) ...depends on HID_RMI (defined at drivers/hid/Kconfig:919), with definition... config HID_RMI tristate "Synaptics RMI4 device support" select RMI4_CORE select RMI4_F03 select RMI4_F11 select RMI4_F12 select RMI4_F30 depends on HID && HID && HID && INPUT help Support for Synaptics RMI4 touchpads. Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid and want support for its special functionalities. ...depends on HID (defined at drivers/hid/Kconfig:8), with definition... config HID tristate "HID bus support" default y depends on INPUT && INPUT help A human interface device (HID) is a type of computer device that interacts directly with and takes input from humans. The term "HID" most commonly used to refer to the USB-HID specification, but other devices (such as, but not strictly limited to, Bluetooth) are designed using HID specification (this involves certain keyboards, mice, tablets, etc). This option adds the HID bus to the kernel, together with generic HID layer code. The HID devices are added and removed from the HID bus by the transport-layer drivers, such as usbhid (USB_HID) and hidp (BT_HIDP). For docs and specs, see http://www.usb.org/developers/hidpage/ If unsure, say Y. (select-related dependencies: (BT_HIDP && BT_BREDR && INPUT && NET) || (USB_HID && USB && INPUT && USB && INPUT) || (I2C_HID && I2C && INPUT && I2C && INPUT) || (INTEL_ISH_HID && (X86_64 || COMPILE_TEST) && PCI && INPUT)) ...depends on I2C_HID (defined at drivers/hid/i2c-hid/Kconfig:5), with definition... config I2C_HID tristate "HID over I2C transport layer" default n select HID depends on I2C && INPUT && I2C && INPUT help Say Y here if you use a keyboard, a touchpad, a touchscreen, or any other HID based devices which is connected to your computer via I2C. If unsure, say N. This support is also available as a module. If so, the module will be called i2c-hid. ...depends on I2C (defined at drivers/i2c/Kconfig:8), with definition... config I2C tristate "I2C support" select RT_MUTEXES select IRQ_DOMAIN help I2C (pronounce: I-squared-C) is a slow serial bus protocol used in many micro controller applications and developed by Philips. SMBus, or System Management Bus is a subset of the I2C protocol. More information is contained in the directory <file:Documentation/i2c/>, especially in the file called "summary" there. Both I2C and SMBus are supported here. You will need this for hardware sensors support, and also for Video For Linux support. If you want I2C support, you should say Y here and also to the specific driver for your bus adapter(s) below. This I2C support can also be built as a module. If so, the module will be called i2c-core. (select-related dependencies: (X86_INTEL_MID && X86_EXTENDED_PLATFORM && X86_PLATFORM_DEVICES && PCI && (X86_64 || (PCI_GOANY && X86_32)) && X86_IO_APIC) || (CAN_PEAK_PCIEC && CAN_PEAK_PCI && CAN_SJA1000 && CAN_DEV && CAN && NET) || (IGB && PCI && NET_VENDOR_INTEL && ETHERNET && NETDEVICES) || (SFC && PCI && NET_VENDOR_SOLARFLARE && ETHERNET && NETDEVICES) || (SFC_FALCON && PCI && NET_VENDOR_SOLARFLARE && ETHERNET && NETDEVICES) || (IPMI_SSIF && IPMI_HANDLER) || I3C || (MEDIA_SUBDRV_AUTOSELECT && (MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_CAMERA_SUPPORT || MEDIA_SDR_SUPPORT) && HAS_IOMEM && MEDIA_SUPPORT) || (DRM && (AGP || AGP = n) && !EMULATED_CMPXCHG && HAS_DMA && HAS_IOMEM) || (FB_DDC && FB && HAS_IOMEM) || (SND_AOA_ONYX && SND_AOA && SND && !UML && SOUND) || (SND_AOA_TAS && SND_AOA && SND && !UML && SOUND) || (ARCH_R8A7790 && ARM && ARCH_RENESAS && SOC_RENESAS) || (ARCH_R8A7791 && ARM && ARCH_RENESAS && SOC_RENESAS) || (ARCH_R8A7793 && ARM && ARCH_RENESAS && SOC_RENESAS) || (PHY_EXYNOS5250_SATA && SOC_EXYNOS5250 && HAS_IOMEM && OF)) ...depends on FB_DDC (defined at drivers/video/fbdev/Kconfig:63), with definition... config FB_DDC tristate select I2C_ALGOBIT select I2C depends on FB && HAS_IOMEM (select-related dependencies: (FB_CYBER2000_DDC && FB_CYBER2000 && HAS_IOMEM) || (FB_NVIDIA_I2C && FB_NVIDIA && HAS_IOMEM) || (FB_RIVA_I2C && FB_RIVA && HAS_IOMEM) || (FB_I740 && FB && PCI && HAS_IOMEM) || (FB_I810_I2C && FB_I810 && FB_I810_GTF && HAS_IOMEM) || (FB_INTEL_I2C && FB_INTEL && HAS_IOMEM) || (FB_MATROX_I2C && FB_MATROX && HAS_IOMEM) || (FB_RADEON_I2C && FB_RADEON && HAS_IOMEM) || (FB_S3_DDC && FB_S3 && HAS_IOMEM) || (FB_SAVAGE_I2C && FB_SAVAGE && HAS_IOMEM) || (FB_3DFX_I2C && FB_3DFX && HAS_IOMEM) || (FB_TRIDENT && FB && PCI && HAS_IOMEM)) ...depends on FB_S3 (defined at drivers/video/fbdev/Kconfig:1314), with definition... config FB_S3 tristate "S3 Trio/Virge support" select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_TILEBLITTING select FB_SVGALIB select VGASTATE select FONT_8x16 if FRAMEBUFFER_CONSOLE depends on FB && PCI && HAS_IOMEM help Driver for graphics boards with S3 Trio / S3 Virge chip. ...depends on FB (defined at drivers/video/fbdev/Kconfig:12), with definition... menuconfig FB tristate "Support for frame buffer devices" select FB_CMDLINE select FB_NOTIFY depends on HAS_IOMEM help The frame buffer device provides an abstraction for the graphics hardware. It represents the frame buffer of some video hardware and allows application software to access the graphics hardware through a well-defined interface, so the software doesn't need to know anything about the low-level (hardware register) stuff. Frame buffer devices work identically across the different architectures supported by Linux and make the implementation of application programs easier and more portable; at this point, an X server exists which uses the frame buffer device exclusively. On several non-X86 architectures, the frame buffer device is the only way to use the graphics hardware. The device is accessed through special device nodes, usually located in the /dev directory, i.e. /dev/fb*. You need an utility program called fbset to make full use of frame buffer devices. Please read <file:Documentation/fb/framebuffer.rst> and the Framebuffer-HOWTO at <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more information. Say Y here and to the driver for your graphics board below if you are compiling a kernel for a non-x86 architecture. If you are compiling for the x86 architecture, you can say Y if you want to play with it, but it is not essential. Please note that running graphical applications that directly touch the hardware (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. (select-related dependencies: (DRM_KMS_FB_HELPER && DRM_KMS_HELPER && HAS_IOMEM) || (DRM_VMWGFX && DRM && PCI && X86 && MMU && HAS_IOMEM)) ...depends on DRM_KMS_HELPER (defined at drivers/gpu/drm/Kconfig:73), with definition... config DRM_KMS_HELPER tristate depends on DRM && HAS_IOMEM help CRTC helpers for KMS drivers. (select-related dependencies: (DRM_DEBUG_SELFTEST && DRM && DEBUG_KERNEL && HAS_IOMEM) || (DRM_FBDEV_EMULATION && DRM && HAS_IOMEM) || (DRM_HDLCD && DRM && OF && (ARM || ARM64) && COMMON_CLK && HAS_IOMEM) || (DRM_MALI_DISPLAY && DRM && OF && (ARM || ARM64) && COMMON_CLK && HAS_IOMEM) || (DRM_KOMEDA && DRM && OF && COMMON_CLK && HAS_IOMEM) || (DRM_RADEON && DRM && PCI && MMU && HAS_IOMEM) || (DRM_AMDGPU && DRM && PCI && MMU && HAS_IOMEM) || (DRM_NOUVEAU && DRM && PCI && MMU && HAS_IOMEM) || (DRM_I915 && DRM && X86 && PCI && HAS_IOMEM) || (DRM_VKMS && DRM && HAS_IOMEM) || (DRM_EXYNOS && OF && DRM && (ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_MULTIPLATFORM || COMPILE_TEST) && HAS_IOMEM) || (DRM_ROCKCHIP && DRM && ROCKCHIP_IOMMU && HAS_IOMEM) || (DRM_VMWGFX && DRM && PCI && X86 && MMU && HAS_IOMEM) || (DRM_GMA500 && DRM && PCI && X86 && MMU && HAS_IOMEM) || (DRM_UDL && DRM && USB_SUPPORT && USB_ARCH_HAS_HCD && HAS_IOMEM) || (DRM_AST && DRM && PCI && MMU && HAS_IOMEM) || (DRM_MGAG200 && DRM && PCI && MMU && HAS_IOMEM) || (DRM_CIRRUS_QEMU && DRM && PCI && MMU && HAS_IOMEM) || (DRM_ARMADA && DRM && HAVE_CLK && ARM && MMU && HAS_IOMEM) || (DRM_ATMEL_HLCDC && DRM && OF && COMMON_CLK && MFD_ATMEL_HLCDC && ARM && HAS_IOMEM) || (DRM_RCAR_DU && DRM && OF && (ARM || ARM64) && (ARCH_RENESAS || COMPILE_TEST) && HAS_IOMEM) || (DRM_SHMOBILE && DRM && ARM && (ARCH_SHMOBILE || COMPILE_TEST) && HAS_IOMEM) || (DRM_SUN4I && DRM && (ARM || ARM64) && COMMON_CLK && (ARCH_SUNXI || COMPILE_TEST) && HAS_IOMEM) || (DRM_OMAP && DRM && (ARCH_OMAP2PLUS || ARCH_MULTIPLATFORM) && HAS_IOMEM) || (DRM_TILCDC && DRM && OF && ARM && HAS_IOMEM) || (DRM_QXL && DRM && PCI && MMU && HAS_IOMEM) || (DRM_BOCHS && DRM && PCI && MMU && HAS_IOMEM) || (DRM_VIRTIO_GPU && DRM && VIRTIO && MMU && HAS_IOMEM) || (DRM_MSM && DRM && (ARCH_QCOM || SOC_IMX5 || (ARM && COMPILE_TEST)) && OF && COMMON_CLK && MMU && (INTERCONNECT || !INTERCONNECT) && HAS_IOMEM) || (DRM_FSL_DCU && DRM && OF && ARM && COMMON_CLK && HAS_IOMEM) || (DRM_TEGRA && (ARCH_TEGRA || (ARM && CO MPILE_TEST)) && COMMON_CLK && DRM && OF && HAS_IOMEM) || (DRM_STM && DRM && (ARCH_STM32 || ARCH_MULTIPLATFORM) && HAS_IOMEM) || (DRM_ANALOGIX_ANX78XX && DRM && DRM_BRIDGE && HAS_IOMEM) || (DRM_CDNS_DSI && OF && DRM && DRM_BRIDGE && HAS_IOMEM) || (DRM_DUMB_VGA_DAC && OF && DRM && DRM_BRIDGE && HAS_IOMEM) || (DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW && OF && DRM && DRM_BRIDGE && HAS_IOMEM) || (DRM_NXP_PTN3460 && OF && DRM && DRM_BRIDGE && HAS_IOMEM) || (DRM_PARADE_PS8622 && OF && DRM && DRM_BRIDGE && HAS_IOMEM) || (DRM_SIL_SII8620 && OF && DRM && DRM_BRIDGE && HAS_IOMEM) || (DRM_SII902X && OF && DRM && DRM_BRIDGE && HAS_IOMEM) || (DRM_TOSHIBA_TC358767 && OF && DRM && DRM_BRIDGE && HAS_IOMEM) || (DRM_TI_TFP410 && OF && DRM && DRM_BRIDGE && HAS_IOMEM) || (DRM_TI_SN65DSI86 && OF && DRM && DRM_BRIDGE && HAS_IOMEM) || (DRM_I2C_ADV7511 && OF && DRM && DRM_BRIDGE && HAS_IOMEM) || (DRM_DW_HDMI && DRM && DRM_BRIDGE && HAS_IOMEM) || (DRM_DW_MIPI_DSI && DRM && DRM_BRIDGE && HAS_IOMEM) || (DRM_STI && OF && DRM && (ARCH_STI || ARCH_MULTIPLATFORM) && HAS_IOMEM) || (DRM_IMX && DRM && (ARCH_MXC || ARCH_MULTIPLATFORM || COMPILE_TEST) && IMX_IPUV3_CORE && HAS_IOMEM) || (DRM_INGENIC && (MIPS || COMPILE_TEST) && DRM && CMA && OF && HAS_IOMEM) || (DRM_VC4 && (ARCH_BCM || ARCH_BCM2835 || COMPILE_TEST) && DRM && SND && SND_SOC && COMMON_CLK && HAS_IOMEM) || (DRM_ARCPGU && DRM && OF && HAS_IOMEM) || (DRM_HISI_HIBMC && DRM && PCI && MMU && HAS_IOMEM) || (DRM_HISI_KIRIN && DRM && OF && ARM64 && HAS_IOMEM) || (DRM_MEDIATEK && DRM && (ARCH_MEDIATEK || (ARM && COMPILE_TEST)) && COMMON_CLK && HAVE_ARM_SMCCC && OF && HAS_IOMEM) || (DRM_ZTE && DRM && ARCH_ZX && HAS_IOMEM) || (DRM_MXSFB && DRM && OF && COMMON_CLK && HAS_IOMEM) || (DRM_MESON && DRM && OF && (ARM || ARM64) && (ARCH_MESON || COMPILE_TEST) && HAS_IOMEM) || (TINYDRM_HX8357D && DRM && SPI && HAS_IOMEM) || (TINYDRM_ILI9225 && DRM && SPI && HAS_IOMEM) || (TINYDRM_ILI9341 && DRM && SPI && HAS_IOMEM) || (TINYDRM_MI0283QT && DRM && SPI && HAS_IOMEM) || (TINYDRM_REPAPER && DRM && SPI && (THERMAL | | !THERMAL) && HAS_IOMEM) || (TINYDRM_ST7586 && DRM && SPI && HAS_IOMEM) || (TINYDRM_ST7735R && DRM && SPI && HAS_IOMEM) || (DRM_PL111 && DRM && (ARM || ARM64 || COMPILE_TEST) && COMMON_CLK && HAS_IOMEM) || (DRM_TVE200 && DRM && CMA && (ARM || COMPILE_TEST) && OF && HAS_IOMEM) || (DRM_XEN_FRONTEND && DRM_XEN && DRM && HAS_IOMEM) || (DRM_VBOXVIDEO && DRM && X86 && PCI && HAS_IOMEM) || (DRM_ASPEED_GFX && DRM && OF && (COMPILE_TEST || ARCH_ASPEED) && HAS_IOMEM) || (DRM_MCDE && DRM && CMA && (ARM || COMPILE_TEST) && OF && HAS_IOMEM) || (DRM_GM12U320 && DRM && USB && HAS_IOMEM)) ...depends on THERMAL (defined at drivers/thermal/Kconfig:6), with definition... menuconfig THERMAL bool "Generic Thermal sysfs driver" help Generic Thermal Sysfs driver offers a generic mechanism for thermal management. Usually it's made up of one or more thermal zone and cooling device. Each thermal zone contains its own temperature, trip points, cooling devices. All platforms with ACPI thermal support can use this driver. If you want this support, you should say Y here. (select-related dependencies: (ACPI_VIDEO && X86 && BACKLIGHT_CLASS_DEVICE && INPUT && ACPI) || (ACPI_CPU_FREQ_PSS && ACPI) || (ACPI_THERMAL && ACPI_PROCESSOR && ACPI) || (DRM_NOUVEAU && ACPI && X86 && DRM && PCI && MMU && HAS_IOMEM) || (DRM_ETNAVIV && DRM_ETNAVIV_THERMAL && DRM && MMU && HAS_IOMEM) || (MMC_SDHCI_OMAP && MMC_SDHCI_PLTFM && OF && MMC) || (INTEL_MENLOW && ACPI_THERMAL && X86_PLATFORM_DEVICES && X86)) (imply-related dependencies: (ACPI_VIDEO && X86 && BACKLIGHT_CLASS_DEVICE && INPUT && ACPI) || (ACPI_CPU_FREQ_PSS && ACPI) || (ACPI_THERMAL && ACPI_PROCESSOR && ACPI) || (DRM_NOUVEAU && ACPI && X86 && DRM && PCI && MMU && HAS_IOMEM) || (DRM_ETNAVIV && DRM_ETNAVIV_THERMAL && DRM && MMU && HAS_IOMEM) || (MMC_SDHCI_OMAP && MMC_SDHCI_PLTFM && OF && MMC) || (INTEL_MENLOW && ACPI_THERMAL && X86_PLATFORM_DEVICES && X86)) ...depends on SENSORS_MLXREG_FAN (defined at drivers/hwmon/Kconfig:952), with definition... config SENSORS_MLXREG_FAN tristate "Mellanox Mellanox FAN driver" select REGMAP imply THERMAL depends on MELLANOX_PLATFORM && HWMON help This option enables support for the FAN control on the Mellanox Ethernet and InfiniBand switches. The driver can be activated by the platform device add call. Say Y to enable these. To compile this driver as a module, choose 'M' here: the module will be called mlxreg-fan. ...depends on HWMON (defined at drivers/hwmon/Kconfig:6), with definition... menuconfig HWMON tristate "Hardware Monitoring support" default y depends on HAS_IOMEM help Hardware monitoring devices let you monitor the hardware health of a system. Most modern motherboards include such a device. It can include temperature sensors, voltage sensors, fan speed sensors and various additional features such as the ability to control the speed of the fans. If you want this support you should say Y here and also to the specific driver(s) for your sensors chip(s) below. To find out which specific driver(s) you need, use the sensors-detect script from the lm_sensors package. Read <file:Documentation/hwmon/userspace-tools.rst> for details. This support can also be built as a module. If so, the module will be called hwmon. (select-related dependencies: I8K || (HABANA_AI && PCI && HAS_IOMEM) || (DRM_RADEON && DRM && PCI && MMU && HAS_IOMEM) || (DRM_AMDGPU && DRM && PCI && MMU && HAS_IOMEM) || (THINKPAD_ACPI && ACPI && ACPI_BATTERY && INPUT && (RFKILL || RFKILL = n) && (ACPI_VIDEO || ACPI_VIDEO = n) && BACKLIGHT_CLASS_DEVICE && X86_PLATFORM_DEVICES && X86) || (EEEPC_LAPTOP && ACPI && INPUT && (RFKILL || RFKILL = n) && (ACPI_VIDEO || ACPI_VIDEO = n) && HOTPLUG_PCI && BACKLIGHT_CLASS_DEVICE && X86_PLATFORM_DEVICES && X86) || (CPU_HWMON && LOONGSON_MACH3X && MIPS_PLATFORM_DEVICES && MIPS) || (NTB_IDT && PCI && NTB)) (imply-related dependencies: I8K || (HABANA_AI && PCI && HAS_IOMEM) || (DRM_RADEON && DRM && PCI && MMU && HAS_IOMEM) || (DRM_AMDGPU && DRM && PCI && MMU && HAS_IOMEM) || (THINKPAD_ACPI && ACPI && ACPI_BATTERY && INPUT && (RFKILL || RFKILL = n) && (ACPI_VIDEO || ACPI_VIDEO = n) && BACKLIGHT_CLASS_DEVICE && X86_PLATFORM_DEVICES && X86) || (EEEPC_LAPTOP && ACPI && INPUT && (RFKILL || RFKILL = n) && (ACPI_VIDEO || ACPI_VIDEO = n) && HOTPLUG_PCI && BACKLIGHT_CLASS_DEVICE && X86_PLATFORM_DEVICES && X86) || (CPU_HWMON && LOONGSON_MACH3X && MIPS_PLATFORM_DEVICES && MIPS) || (NTB_IDT && PCI && NTB)) ...depends again on THINKPAD_ACPI (defined at drivers/platform/x86/Kconfig:484) _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
