[PATCH/RFC 2/6] drm: Miscellaneous typo fixes and documentation updates

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/drm_crtc.c    |    2 +-
 drivers/gpu/drm/drm_sysfs.c   |    8 ++++----
 include/drm/drmP.h            |   10 +++++-----
 include/drm/drm_crtc.h        |   21 +++++++--------------
 include/drm/drm_crtc_helper.h |   21 +++++++++++++++++++++
 5 files changed, 38 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index c79870a..11ea8a7 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -361,7 +361,7 @@ EXPORT_SYMBOL(drm_framebuffer_cleanup);
  * @funcs: callbacks for the new CRTC
  *
  * LOCKING:
- * Caller must hold mode config lock.
+ * Takes mode_config lock.
  *
  * Inits a new object created as base part of an driver crtc object.
  *
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 5a7bd51..c53d8e7 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -347,17 +347,17 @@ static struct bin_attribute edid_attr = {
 };
 
 /**
- * drm_sysfs_connector_add - add an connector to sysfs
+ * drm_sysfs_connector_add - add a connector to sysfs
  * @connector: connector to add
  *
- * Create an connector device in sysfs, along with its associated connector
+ * Create a connector device in sysfs, along with its associated connector
  * properties (so far, connection status, dpms, mode list & edid) and
  * generate a hotplug event so userspace knows there's a new connector
  * available.
  *
  * Note:
- * This routine should only be called *once* for each DRM minor registered.
- * A second call for an already registered device will trigger the BUG_ON
+ * This routine should only be called *once* for each registered connector.
+ * A second call for an already registered connector will trigger the BUG_ON
  * below.
  */
 int drm_sysfs_connector_add(struct drm_connector *connector)
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index dd73104..95ef926 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -755,11 +755,11 @@ struct drm_driver {
 	 * @dev: DRM device
 	 * @crtc: counter to fetch
 	 *
-	 * Driver callback for fetching a raw hardware vblank counter
-	 * for @crtc.  If a device doesn't have a hardware counter, the
-	 * driver can simply return the value of drm_vblank_count and
-	 * make the enable_vblank() and disable_vblank() hooks into no-ops,
-	 * leaving interrupts enabled at all times.
+	 * Driver callback for fetching a raw hardware vblank counter for @crtc.
+	 * If a device doesn't have a hardware counter, the driver can simply
+	 * return the value of drm_vblank_count. The DRM core will account for
+	 * missed vblank events while interrupts where disabled based on system
+	 * timestamps.
 	 *
 	 * Wraparound handling and loss of events due to modesetting is dealt
 	 * with in the DRM core code.
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index e250eda..201001c 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -285,19 +285,15 @@ struct drm_plane;
 
 /**
  * drm_crtc_funcs - control CRTCs for a given device
- * @reset: reset CRTC after state has been invalidate (e.g. resume)
- * @dpms: control display power levels
  * @save: save CRTC state
- * @resore: restore CRTC state
- * @lock: lock the CRTC
- * @unlock: unlock the CRTC
- * @shadow_allocate: allocate shadow pixmap
- * @shadow_create: create shadow pixmap for rotation support
- * @shadow_destroy: free shadow pixmap
- * @mode_fixup: fixup proposed mode
- * @mode_set: set the desired mode on the CRTC
+ * @restore: restore CRTC state
+ * @reset: reset CRTC after state has been invalidate (e.g. resume)
+ * @cursor_set: setup the cursor
+ * @cursor_move: move the cursor
  * @gamma_set: specify color ramp for CRTC
  * @destroy: deinit and free object.
+ * @set_config: apply a new CRTC configuration
+ * @page_flip: initiate a page flip
  *
  * The drm_crtc_funcs structure is the central CRTC management structure
  * in the DRM.  Each CRTC controls one or more connectors (note that the name
@@ -404,11 +400,8 @@ struct drm_crtc {
  * @save: save connector state
  * @restore: restore connector state
  * @reset: reset connector after state has been invalidate (e.g. resume)
- * @mode_valid: is this mode valid on the given connector?
- * @mode_fixup: try to fixup proposed mode for this connector
- * @mode_set: set this mode
  * @detect: is this connector active?
- * @get_modes: get mode list for this connector
+ * @fill_modes: fill mode list for this connector
  * @set_property: property for this connector may need update
  * @destroy: make object go away
  * @force: notify the driver the connector is forced on
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
index 37515d1..63f0ac9 100644
--- a/include/drm/drm_crtc_helper.h
+++ b/include/drm/drm_crtc_helper.h
@@ -44,6 +44,13 @@ enum mode_set_atomic {
 	ENTER_ATOMIC_MODE_SET,
 };
 
+/**
+ * drm_crtc_helper_funcs - helper operations for CRTCs
+ * @mode_fixup: try to fixup proposed mode for this connector
+ * @mode_set: set this mode
+ *
+ * The helper operations are called by the mid-layer CRTC helper.
+ */
 struct drm_crtc_helper_funcs {
 	/*
 	 * Control power levels on the CRTC.  If the mode passed in is
@@ -76,6 +83,13 @@ struct drm_crtc_helper_funcs {
 	void (*disable)(struct drm_crtc *crtc);
 };
 
+/**
+ * drm_encoder_helper_funcs - helper operations for encoders
+ * @mode_fixup: try to fixup proposed mode for this connector
+ * @mode_set: set this mode
+ *
+ * The helper operations are called by the mid-layer CRTC helper.
+ */
 struct drm_encoder_helper_funcs {
 	void (*dpms)(struct drm_encoder *encoder, int mode);
 	void (*save)(struct drm_encoder *encoder);
@@ -97,6 +111,13 @@ struct drm_encoder_helper_funcs {
 	void (*disable)(struct drm_encoder *encoder);
 };
 
+/**
+ * drm_connector_helper_funcs - helper operations for connectors
+ * @get_modes: get mode list for this connector
+ * @mode_valid: is this mode valid on the given connector?
+ *
+ * The helper operations are called by the mid-layer CRTC helper.
+ */
 struct drm_connector_helper_funcs {
 	int (*get_modes)(struct drm_connector *connector);
 	int (*mode_valid)(struct drm_connector *connector,
-- 
1.7.3.4

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel


[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux