Changes since v6: - add the mipitx driving control in device tree. - config mipitx impedance with calibration data. Changes since v5: - remove mipi_tx->ref_clk - remove mt8183 pll prepare unprepare Changes since v4: - fine tune the mipi_tx->ref_clk and mipi_tx->pll sequence 1. Prepare mipi_tx->ref_clk 2. Prepare mipi_tx->pll 3. Enable mipi_tx->ref_clk 4. Enable mipi_tx->pll Changes since v3: - turn off PLL before setting PLL parameters. Changes since v2: - update Acked-by: Rob Herring <robh@xxxxxxxxxx> - update mt8183 max bit rate support Changes since v1: - update dt-bindings document for mt8183 mipitx. - remove mtk_mipitx_clk_get_ops and assign clk_ops in probe. - fix the lincence - remove txdiv1 from mtk_mipi_tx_pll_prepare Jitao Shi (5): dt-bindings: display: mediatek: update dsi supported chips drm/mediatek: separate mipi_tx to different file drm/mediatek: add mipi_tx driver for mt8183 drm/mediatek: add the mipitx driving control in device tree drm/mediatek: config mipitx impedance with calibration data .../display/mediatek/mediatek,dsi.txt | 15 +- drivers/gpu/drm/mediatek/Makefile | 2 + drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 344 ++---------------- drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 51 +++ drivers/gpu/drm/mediatek/mtk_mt8173_mipi_tx.c | 289 +++++++++++++++ drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 220 +++++++++++ 6 files changed, 603 insertions(+), 318 deletions(-) create mode 100644 drivers/gpu/drm/mediatek/mtk_mipi_tx.h create mode 100644 drivers/gpu/drm/mediatek/mtk_mt8173_mipi_tx.c create mode 100644 drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c -- 2.21.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
