Hi Artur,
On 19. 9. 19. 오후 11:22, Artur Świgoń wrote:
> From: Artur Świgoń <a.swigon@xxxxxxxxxxxxxxxxxxx>
>
> This patch adds minor improvements to the exynos-bus driver.
>
> Signed-off-by: Artur Świgoń <a.swigon@xxxxxxxxxxxxxxxxxxx>
> Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> ---
> drivers/devfreq/exynos-bus.c | 66 ++++++++++++++----------------------
> 1 file changed, 25 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
> index 60ad4319fd80..8d44810cac69 100644
> --- a/drivers/devfreq/exynos-bus.c
> +++ b/drivers/devfreq/exynos-bus.c
> @@ -15,11 +15,10 @@
> #include <linux/device.h>
> #include <linux/export.h>
> #include <linux/module.h>
> -#include <linux/of_device.h>
> +#include <linux/of.h>
> #include <linux/pm_opp.h>
> #include <linux/platform_device.h>
> #include <linux/regulator/consumer.h>
> -#include <linux/slab.h>
>
> #define DEFAULT_SATURATION_RATIO 40
>
> @@ -178,7 +177,7 @@ static int exynos_bus_parent_parse_of(struct device_node *np,
> struct device *dev = bus->dev;
> struct opp_table *opp_table;
> const char *vdd = "vdd";
> - int i, ret, count, size;
> + int i, ret, count;
>
> opp_table = dev_pm_opp_set_regulators(dev, &vdd, 1);
> if (IS_ERR(opp_table)) {
> @@ -201,8 +200,7 @@ static int exynos_bus_parent_parse_of(struct device_node *np,
> }
> bus->edev_count = count;
>
> - size = sizeof(*bus->edev) * count;
> - bus->edev = devm_kzalloc(dev, size, GFP_KERNEL);
> + bus->edev = devm_kcalloc(dev, count, sizeof(*bus->edev), GFP_KERNEL);
> if (!bus->edev) {
> ret = -ENOMEM;
> goto err_regulator;
> @@ -301,10 +299,9 @@ static int exynos_bus_profile_init(struct exynos_bus *bus,
> profile->exit = exynos_bus_exit;
>
> ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
> - if (!ondemand_data) {
> - ret = -ENOMEM;
> - goto err;
> - }
> + if (!ondemand_data)
> + return -ENOMEM;
> +
> ondemand_data->upthreshold = 40;
> ondemand_data->downdifferential = 5;
>
> @@ -314,8 +311,7 @@ static int exynos_bus_profile_init(struct exynos_bus *bus,
> ondemand_data);
> if (IS_ERR(bus->devfreq)) {
> dev_err(dev, "failed to add devfreq device\n");
> - ret = PTR_ERR(bus->devfreq);
> - goto err;
> + return PTR_ERR(bus->devfreq);
> }
>
> /*
> @@ -325,16 +321,13 @@ static int exynos_bus_profile_init(struct exynos_bus *bus,
> ret = exynos_bus_enable_edev(bus);
> if (ret < 0) {
> dev_err(dev, "failed to enable devfreq-event devices\n");
> - goto err;
> + return ret;
> }
>
> ret = exynos_bus_set_event(bus);
> - if (ret < 0) {
> + if (ret < 0)
> dev_err(dev, "failed to set event to devfreq-event devices\n");
> - goto err;
Instead of removing 'goto err', just return err as I commented[1] on v1.
[1] https://lkml.org/lkml/2019/7/26/331
> - }
>
> -err:
> return ret;
And you just keep 'return ret' or you can change it as 'return 0'.
> }
>
> @@ -344,7 +337,6 @@ static int exynos_bus_profile_init_passive(struct exynos_bus *bus,
> struct device *dev = bus->dev;
> struct devfreq_passive_data *passive_data;
> struct devfreq *parent_devfreq;
> - int ret = 0;
>
> /* Initialize the struct profile and governor data for passive device */
> profile->target = exynos_bus_target;
> @@ -352,30 +344,26 @@ static int exynos_bus_profile_init_passive(struct exynos_bus *bus,
>
> /* Get the instance of parent devfreq device */
> parent_devfreq = devfreq_get_devfreq_by_phandle(dev, 0);
> - if (IS_ERR(parent_devfreq)) {
> - ret = -EPROBE_DEFER;
> - goto err;
> - }
> + if (IS_ERR(parent_devfreq))
> + return -EPROBE_DEFER;
>
> passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL);
> - if (!passive_data) {
> - ret = -ENOMEM;
> - goto err;
> - }
> + if (!passive_data)
> + return -ENOMEM;
> +
> passive_data->parent = parent_devfreq;
>
> /* Add devfreq device for exynos bus with passive governor */
> - bus->devfreq = devm_devfreq_add_device(dev, profile, DEVFREQ_GOV_PASSIVE,
> + bus->devfreq = devm_devfreq_add_device(dev, profile,
> + DEVFREQ_GOV_PASSIVE,
> passive_data);
> if (IS_ERR(bus->devfreq)) {
> dev_err(dev,
> "failed to add devfreq dev with passive governor\n");
> - ret = PTR_ERR(bus->devfreq);
> - goto err;
> + return PTR_ERR(bus->devfreq);
> }
>
> -err:
> - return ret;
> + return 0;
> }
>
> static int exynos_bus_probe(struct platform_device *pdev)
> @@ -393,18 +381,18 @@ static int exynos_bus_probe(struct platform_device *pdev)
> return -EINVAL;
> }
>
> - bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
> + bus = devm_kzalloc(dev, sizeof(*bus), GFP_KERNEL);
> if (!bus)
> return -ENOMEM;
> mutex_init(&bus->lock);
> - bus->dev = &pdev->dev;
> + bus->dev = dev;
> platform_set_drvdata(pdev, bus);
>
> profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL);
> if (!profile)
> return -ENOMEM;
>
> - node = of_parse_phandle(dev->of_node, "devfreq", 0);
> + node = of_parse_phandle(np, "devfreq", 0);
> if (node) {
> of_node_put(node);
> passive = true;
> @@ -461,12 +449,10 @@ static int exynos_bus_resume(struct device *dev)
> int ret;
>
> ret = exynos_bus_enable_edev(bus);
> - if (ret < 0) {
> + if (ret < 0)
> dev_err(dev, "failed to enable the devfreq-event devices\n");
> - return ret;
Keep the 'return ret' if error happen as I commented[1] on v1.
[1] https://lkml.org/lkml/2019/7/26/331
> - }
>
> - return 0;
> + return ret;
And you just keep 'return 0' or you can change it as 'return ret'.
> }
>
> static int exynos_bus_suspend(struct device *dev)
> @@ -475,12 +461,10 @@ static int exynos_bus_suspend(struct device *dev)
> int ret;
>
> ret = exynos_bus_disable_edev(bus);
> - if (ret < 0) {
> + if (ret < 0)
> dev_err(dev, "failed to disable the devfreq-event devices\n");
> - return ret;
Keep the 'return ret' if error happen as I commented[1] on v1.
[1] https://lkml.org/lkml/2019/7/26/331
> - }
>
> - return 0;
> + return ret;
And you just keep 'return 0' or you can change it as 'return ret'.
> }
> #endif
>
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
