Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI
panel.
V5:
- Add the information of the reviewer (Sam)
- Delete unnecessary header files #include <linux/fb.h> (Sam)
- The config DRM_PANEL_BOE_HIMAX8279D appears twice. Drop one of them (Sam)
- ADD static, set_gpios function is not used outside this module (Sam)
V4:
- Frefix all function maes with boe_ (Sam)
- Fsed "enable_gpio" replace "reset_gpio", Make it look clearer (Sam)
- Sort include lines alphabetically (Sam)
- Fixed entries in the makefile must be sorted alphabetically (Sam)
- Add send_mipi_cmds function to avoid duplicating the code (Sam)
- Add the necessary delay(reset_delay_t5) between reset and sending
the initialization command (Rock wang)
V3:
- Remove unnecessary delays in sending initialization commands (Jitao Shi)
V2:
- Use SPDX identifier (Sam)
- Use necessary header files replace drmP.h (Sam)
- Delete unnecessary header files #include <linux/err.h> (Sam)
- Specifies a GPIOs array to control the reset timing,
instead of reading "dsi-reset-sequence" data from DTS (Sam)
- Delete backlight_disable() function when already disabled (Sam)
- Use devm_of_find_backlight() replace of_find_backlight_by_node() (Sam)
- Move the necessary data in the DTS to the current file,
like porch, display_mode and Init code etc. (Sam)
- Add compatible device "boe,himax8279d10p" (Sam)
V1:
- Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI
panel.
Signed-off-by: Jerry Han <hanxu5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
Cc: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
Cc: Derek Basehore <dbasehore@xxxxxxxxxxxx>
Cc: Rock wang <rock_wang@xxxxxxxxxxxx>
---
drivers/gpu/drm/panel/panel-boe-himax8279d.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-boe-himax8279d.c b/drivers/gpu/drm/panel/panel-boe-himax8279d.c
index aa7d91279819..c050a48487a2 100644
--- a/drivers/gpu/drm/panel/panel-boe-himax8279d.c
+++ b/drivers/gpu/drm/panel/panel-boe-himax8279d.c
@@ -8,7 +8,6 @@
#include <linux/backlight.h>
#include <linux/delay.h>
-#include <linux/fb.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -72,7 +71,7 @@ static inline struct panel_info *to_panel_info(struct drm_panel *panel)
return container_of(panel, struct panel_info, base);
}
-void set_gpios(struct panel_info *pinfo, int enable)
+static void set_gpios(struct panel_info *pinfo, int enable)
{
gpiod_set_value(pinfo->enable_gpio, enable);
gpiod_set_value(pinfo->pp33_gpio, enable);
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
