Hello, I am testing latest rc8/Linus git tree on my new Acer Nitro 5 (AN515-43-R8BF) Laptop. The box has an Ryzen7 3750H APU+RX 560x hybrid GPU(s). Suspending ( closing the Lid ) from tty without X up is working fine, however with X running doing the same does not work. The display remains black. It seems to be triggered from .. dcn10_hw_sequencer.c:932 dcn10_verify_allow_pstate_change_high.cold+0xc/0x229 [amdgpu] The dmesg is way to big to post there so I uploaded it: dmesg: http://crazy.dev.frugalware.org/Nitro5/dmesg.one.txt lspci: http://crazy.dev.frugalware.org/Nitro5/lspci.nnvv.txt http://crazy.dev.frugalware.org/Nitro5/lspci.txt config: http://crazy.dev.frugalware.org/Nitro5/config.nitro5-5.3-r8git I didn't tested any other rcX kernels so I cannot tell if all are affected, but 5.2.x kernels are working fine on this box. The dirty state of the build is because this patch, which fixes the NVME device on that box: https://lkml.org/lkml/2019/9/11/569 If you need more infos please let me know. Also I can test any kind patches. Best Regards, Gabriel C _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
