Dne sreda, 11. september 2019 ob 18:23:59 CEST je Neil Armstrong napisal(a):
> On 11/09/2019 10:26, Cheng-Yi Chiang wrote:
> > From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
> >
> > When transmitting IEC60985 linear PCM audio, we configure the
> > Aduio Sample Channel Status information in the IEC60958 frame.
> > The status bit is already available in iec.status of hdmi_codec_params.
> >
> > This fix the issue that audio does not come out on some monitors
> > (e.g. LG 22CV241)
> >
> > Note that these registers are only for interfaces:
> > I2S audio interface, General Purpose Audio (GPA), or AHB audio DMA
> > (AHBAUDDMA).
> > For S/PDIF interface this information comes from the stream.
> >
> > Currently this function dw_hdmi_set_channel_status is only called
> > from dw-hdmi-i2s-audio in I2S setup.
> >
> > Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
> > Signed-off-by: Cheng-Yi Chiang <cychiang@xxxxxxxxxxxx>
> > ---
> >
> > Change from v2 to v3:
> > 1. Reuse what is already set in iec.status in hw_param.
> > 2. Remove all useless definition of registers and values.
> > 3. Note that the original sampling frequency is not written to
> >
> > the channel status as we reuse create_iec958_consumer in pcm_iec958.c.
> > Without that it can still play audio fine.
> >
> > .../drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 1 +
> > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 20 +++++++++++++++++++
> > drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 2 ++
> > include/drm/bridge/dw_hdmi.h | 1 +
> > 4 files changed, 24 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> > b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c index
> > 34d8e837555f..20f4f92dd866 100644
> > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> > @@ -102,6 +102,7 @@ static int dw_hdmi_i2s_hw_params(struct device *dev,
> > void *data,>
> > }
> >
> > dw_hdmi_set_sample_rate(hdmi, hparms->sample_rate);
> >
> > + dw_hdmi_set_channel_status(hdmi, hparms->iec.status);
> >
> > dw_hdmi_set_channel_count(hdmi, hparms->channels);
> > dw_hdmi_set_channel_allocation(hdmi, hparms-
>cea.channel_allocation);
> >
> > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index
> > bd65d0479683..aa7efd4da1c8 100644
> > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > @@ -582,6 +582,26 @@ static unsigned int hdmi_compute_n(unsigned int freq,
> > unsigned long pixel_clk)>
> > return n;
> >
> > }
> >
> > +/*
> > + * When transmitting IEC60958 linear PCM audio, these registers allow to
> > + * configure the channel status information of all the channel status
> > + * bits in the IEC60958 frame. For the moment this configuration is only
> > + * used when the I2S audio interface, General Purpose Audio (GPA),
> > + * or AHB audio DMA (AHBAUDDMA) interface is active
> > + * (for S/PDIF interface this information comes from the stream).
> > + */
> > +void dw_hdmi_set_channel_status(struct dw_hdmi *hdmi,
> > + u8 *channel_status)
> > +{
> > + /*
> > + * Set channel status register for frequency and word length.
> > + * Use default values for other registers.
> > + */
> > + hdmi_writeb(hdmi, channel_status[3], HDMI_FC_AUDSCHNLS7);
> > + hdmi_writeb(hdmi, channel_status[4], HDMI_FC_AUDSCHNLS8);
> > +}
> > +EXPORT_SYMBOL_GPL(dw_hdmi_set_channel_status);
> > +
> >
> > static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
> >
> > unsigned long pixel_clk, unsigned int sample_rate)
> >
> > {
> >
> > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> > b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h index
> > 6988f12d89d9..fcff5059db24 100644
> > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> > @@ -158,6 +158,8 @@
> >
> > #define HDMI_FC_SPDDEVICEINF 0x1062
> > #define HDMI_FC_AUDSCONF 0x1063
> > #define HDMI_FC_AUDSSTAT 0x1064
> >
> > +#define HDMI_FC_AUDSCHNLS7 0x106e
> > +#define HDMI_FC_AUDSCHNLS8 0x106f
> >
> > #define HDMI_FC_DATACH0FILL 0x1070
> > #define HDMI_FC_DATACH1FILL 0x1071
> > #define HDMI_FC_DATACH2FILL 0x1072
> >
> > diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> > index cf528c289857..4b3e863c4f8a 100644
> > --- a/include/drm/bridge/dw_hdmi.h
> > +++ b/include/drm/bridge/dw_hdmi.h
> > @@ -156,6 +156,7 @@ void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool
> > hpd, bool rx_sense);>
> > void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate);
> > void dw_hdmi_set_channel_count(struct dw_hdmi *hdmi, unsigned int cnt);
> >
> > +void dw_hdmi_set_channel_status(struct dw_hdmi *hdmi, u8
> > *channel_status);
> >
> > void dw_hdmi_set_channel_allocation(struct dw_hdmi *hdmi, unsigned int
> > ca);
> > void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
> > void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
>
> Looks fine for me:
> Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
>
> Jonas ? Jernej ? Russell ?
Patch itself is fine, I'm just wondering if more information should be copied
from status array to registers. But I think they are not 1:1 mapping so some
more work would be needed. Anyway, patch is:
Reviewed-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
Best regards,
Jernej
>
> If it's ok for you I'll apply it.
>
> Neil
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
