Hi Rob, Thank you for your feedback! > From: Rob Herring <robh+dt@xxxxxxxxxx> > Sent: 29 August 2019 15:03 > Subject: Re: [PATCH v3 1/8] dt-bindings: display: Add bindings for LVDS bus-timings > > On Wed, Aug 28, 2019 at 1:36 PM Fabrizio Castro > <fabrizio.castro@xxxxxxxxxxxxxx> wrote: > > > > Dual-LVDS connections need markers in the DT, this patch adds > > some common documentation to be referenced by both panels and > > bridges. > > > > Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx> > > > > --- > > v2->v3: > > * new patch > > --- > > .../bindings/display/bus-timings/lvds.yaml | 38 ++++++++++++++++++++++ > > 1 file changed, 38 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/bus-timings/lvds.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/bus-timings/lvds.yaml b/Documentation/devicetree/bindings/display/bus- > timings/lvds.yaml > > new file mode 100644 > > index 0000000..f35b55a > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/bus-timings/lvds.yaml > > @@ -0,0 +1,38 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > (GPL-2.0-only OR BSD-2-Clause) is preferred for new bindings. > > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/bus-timings/lvds.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Common Properties for bus timings of LVDS interfaces > > + > > +maintainers: > > + - Thierry Reding <thierry.reding@xxxxxxxxx> > > + - Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx> > > + > > +description: | > > + This document defines device tree properties common to LVDS and dual-LVDS > > + interfaces, where a dual-LVDS interface is a dual-link connection with even > > + pixels traveling on one connection, and with odd pixels traveling on the other > > + connection. > > + This document doesn't constitue a device tree binding specification by itself > > typo: constitute Well spotted! > > > + but is meant to be referenced by device tree bindings. > > + When referenced from panel or bridge device tree bindings, the properties > > + defined in this document are defined as follows. The panel and bridge device > > + tree bindings are responsible for defining whether each property is required > > + or optional. > > + > > +properties: > > + dual-lvds-even-pixels: > > + type: boolean > > + description: > > + This property is specific to an input port of a sink device. When > > The schema should define what nodes these go in. The description seems > to indicate in 'port' nodes (or endpoint?), but your use in the panel > binding puts them in the parent. Did you manage to read this? https://patchwork.kernel.org/cover/11119607/ Could you please advice on how to do this properly? > > > + specified, it marks the port as recipient of even-pixels. > > + > > + dual-lvds-odd-pixels: > > + type: boolean > > + description: > > + This property is specific to an input port of a sink device. When > > + specified, it marks the port as recipient of odd-pixels. > > However, I don't think you even need these. A panel's port numbers are > fixed can imply even or odd. For example port@0 can be even and port@1 > can be odd. The port numbering is typically panel specific, but we may > be able to define the numbering generically if we don't already have > panels with multiple ports. > > Also, aren't there dual link DSI panels? This is the result of a discussion on here: https://patchwork.kernel.org/patch/11095547/ Have you come across it? Thanks! Fab > > Rob _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
