Configure the display Quality of service (QoS) levels priority if the
optional property node "arm,malidp-aqros-value" is defined in DTS file.
QoS signaling using AQROS and AWQOS AXI interface signals, the AQROS is
driven from the "RQOS" register, so needed to program the RQOS register
to avoid the high resolutions flicker issue on the LS1028A platform.
Signed-off-by: Wen He <wen.he_1@xxxxxxx>
---
drivers/gpu/drm/arm/malidp_drv.c | 6 ++++++
drivers/gpu/drm/arm/malidp_hw.c | 13 +++++++++++++
drivers/gpu/drm/arm/malidp_hw.h | 3 +++
drivers/gpu/drm/arm/malidp_regs.h | 10 ++++++++++
4 files changed, 32 insertions(+)
diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c
index c27ff456eddc..80e8d15760ac 100644
--- a/drivers/gpu/drm/arm/malidp_drv.c
+++ b/drivers/gpu/drm/arm/malidp_drv.c
@@ -815,6 +815,12 @@ static int malidp_bind(struct device *dev)
malidp->core_id = version;
+ ret = of_property_read_u32(dev->of_node,
+ "arm,malidp-arqos-value",
+ &hwdev->arqos_value);
+ if (ret)
+ hwdev->arqos_value = 0x0;
+
/* set the number of lines used for output of RGB data */
ret = of_property_read_u8_array(dev->of_node,
"arm,malidp-output-port-lines",
diff --git a/drivers/gpu/drm/arm/malidp_hw.c b/drivers/gpu/drm/arm/malidp_hw.c
index 380be66d4c6e..f90a367a5bc9 100644
--- a/drivers/gpu/drm/arm/malidp_hw.c
+++ b/drivers/gpu/drm/arm/malidp_hw.c
@@ -374,6 +374,19 @@ static void malidp500_modeset(struct malidp_hw_device *hwdev, struct videomode *
malidp_hw_setbits(hwdev, MALIDP_DISP_FUNC_ILACED, MALIDP_DE_DISPLAY_FUNC);
else
malidp_hw_clearbits(hwdev, MALIDP_DISP_FUNC_ILACED, MALIDP_DE_DISPLAY_FUNC);
+
+ /*
+ * Program the RQoS register to avoid high resolutions flicker
+ * issue on the LS1028A.
+ */
+ if (hwdev->arqos_value) {
+ val = hwdev->arqos_value;
+
+ if (mode->pixelclock > 148500000)
+ malidp_hw_setbits(hwdev, val, MALIDP500_RQOS_QUALITY);
+ else
+ malidp_hw_clearbits(hwdev, val, MALIDP500_RQOS_QUALITY);
+ }
}
int malidp_format_get_bpp(u32 fmt)
diff --git a/drivers/gpu/drm/arm/malidp_hw.h b/drivers/gpu/drm/arm/malidp_hw.h
index 968a65eed371..e4c36bc90bda 100644
--- a/drivers/gpu/drm/arm/malidp_hw.h
+++ b/drivers/gpu/drm/arm/malidp_hw.h
@@ -251,6 +251,9 @@ struct malidp_hw_device {
/* size of memory used for rotating layers, up to two banks available */
u32 rotation_memory[2];
+
+ /* priority level of RQOS register used for driven the ARQOS signal */
+ u32 arqos_value;
};
static inline u32 malidp_hw_read(struct malidp_hw_device *hwdev, u32 reg)
diff --git a/drivers/gpu/drm/arm/malidp_regs.h b/drivers/gpu/drm/arm/malidp_regs.h
index 993031542fa1..514c50dcb74d 100644
--- a/drivers/gpu/drm/arm/malidp_regs.h
+++ b/drivers/gpu/drm/arm/malidp_regs.h
@@ -210,6 +210,16 @@
#define MALIDP500_CONFIG_VALID 0x00f00
#define MALIDP500_CONFIG_ID 0x00fd4
+/*
+ * The quality of service (QoS) register on the DP500. RQOS register values
+ * are driven by the ARQOS signal, using AXI transacations, dependent on the
+ * FIFO input level.
+ * The RQOS register can also set QoS levels for:
+ * - RED_ARQOS @ A 4-bit signal value for close to underflow conditions
+ * - GREEN_ARQOS @ A 4-bit signal value for normal conditions
+ */
+#define MALIDP500_RQOS_QUALITY 0x00500
+
/* register offsets and bits specific to DP550/DP650 */
#define MALIDP550_ADDR_SPACE_SIZE 0x10000
#define MALIDP550_DE_CONTROL 0x00010
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
