Add HDMI tx and phy nodes to support an external display that can be connected over the SlimPort. This is based on work from Jonathan Marek. Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> --- The hdmi-tx node in the downstream MSM sources: https://github.com/AICP/kernel_lge_hammerhead/blob/n7.1/arch/arm/boot/dts/msm8974-mdss.dtsi#L101 arch/arm/boot/dts/qcom-msm8974.dtsi | 80 +++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 369e58f64145..35c51336a9d4 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1139,6 +1139,13 @@ port@0 { reg = <0>; + mdp5_intf3_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + + port@1 { + reg = <1>; mdp5_intf1_out: endpoint { remote-endpoint = <&dsi0_in>; }; @@ -1216,6 +1223,79 @@ clocks = <&mmcc MDSS_AHB_CLK>; clock-names = "iface"; }; + + hdmi: hdmi-tx@fd922100 { + status = "disabled"; + + compatible = "qcom,hdmi-tx-8974"; + reg = <0xfd922100 0x35c>, + <0xfc4b8000 0x60f0>; + reg-names = "core_physical", + "qfprom_physical"; + + interrupt-parent = <&mdss>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&mmcc MDSS_GDSC>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_HDMI_CLK>, + <&mmcc MDSS_HDMI_AHB_CLK>, + <&mmcc MDSS_EXTPCLK_CLK>; + clock-names = "mdp_core", + "iface", + "core", + "alt_iface", + "extp"; + + hpd-5v-supply = <&pm8941_5vs2>; + core-vdda-supply = <&pm8941_l12>; + core-vcc-supply = <&pm8941_s3>; + + /* + * FIXME - drivers/gpu/drm/msm/hdmi/hdmi.c via hpd_reg_names_8x74 + * looks for hpd-gdsc-supply. What should be used here? Shouldn't + * this functionality be provided by the power-domains above? + */ + + phys = <&hdmi_phy>; + phy-names = "hdmi_phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hdmi_in: endpoint { + remote-endpoint = <&mdp5_intf3_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + hdmi_phy: hdmi-phy@fd922500 { + status = "disabled"; + + compatible = "qcom,hdmi-phy-8974"; + reg = <0xfd922500 0x7c>; + reg-names = "hdmi_phy"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_HDMI_AHB_CLK>; + clock-names = "iface", + "alt_iface"; + + core-vdda-supply = <&pm8941_l12>; + vddio-supply = <&pm8941_s3>; + + #phy-cells = <0>; + }; }; }; -- 2.21.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
